Abstract
The new approach to design and research of the electromechanical converter with a secondary discrete part based on the analysis of the movement of a secondary discrete part is offered. The configuration is defined and optimizing calculation of the inductor of the electromechanical converter with a secondary discrete part is executed. As a method of optimization, the stochastic method of random variables of Monte Carlo has been used. Optimization is executed in two stages with the application of a software package of FEMM 4.2. As a result of optimization, the geometrical sizes of a tooth zone of the inductor of the device are received. The research of change of the electromagnetic effort operating on a single ferromagnetic element in the working camera at the change of geometry of a tooth zone is conducted. The geometrical sizes of elements of a tooth zone of the inductor providing the best conditions of movement of a secondary discrete part on the volume of the working camera are determined.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Kirbyatyeva TV, Kortovenko LP et al (2013) A research of influence of processing in devices of a vortex layer on quality of ready paints and varnishes. Scientific capacity of regions on service of modernization, pp 17–20
Volodin GI (2009) Electromagnetic processes in devices with any mobile part. Dissertation, South-Russian State Polytechnic University
Volodin GI, Bakhvalov AYu (2013) Synthesis of the inductor of the rotating magnetic field of the activator with a vortex layer for processing of sewage. II—I am the International scientific and practical Ecology conference: education, science, industry and health, pp 40–43
Bakhvalov AYu (2008) Electromechanical devices with a discrete secondary part: analysis algorithms and synthesis and advanced designs. Dissertation, South-Russian State Polytechnic University
Kuimov DN, Minkin MS (2016) Low-sulfur fuel and oil production. Materials Science Forum, pp 671–676
Minkin MS, Kuimov DN et al (2016) Electromechanical activation of oil and oil residues in devices of a vortex layer. Collection of works XII of the international scientific and technical conference. Dynamics of technical systems, pp 392–396
Kuimov DN, Minkin MS (2017) The electromechanical converter in the systems of desulfurisation of crude oil. In: Abbasian NT, Sevostianov I, Yeghiazaryan K, Nguyen DA, Mladenovic V (eds) MATEC Web of Conferences
Kuimov DN, Pavlenko AV et al (2017) The electromechanical transducer with a secondary discrete part of the processing system of oil and oil products. News of higher educational institutions. Electromechanics 60(5):39–46
Kuimov DN (2016) The motion estimation of the secondary discrete parts in electromechanical actuators of a vortex layer. News of Higher Educational Institutions. Electromechanics 5(547): 11–15
Vershinin NP (2007) Process activating unit. WO Patent 2007114731
Popov EA (2004) The induction device for hashing and crushing of liquid and loose environments. RU Patent 53933, 10 June 2004
Meeker D (2008) Finite element method magnetics. Version 4:2
Klimov EA (2012) Evaluation of the effect of zero sequence components on the efficiency of the Electromechanical activator (apparatus with a vortex layer). Izvestiya vuzov. Electromechanics 1:67–72
Petrushin AD (2016) Optimization of an active part of the ventilno-inductor electric drive RGUPS Bulletin, pp 61–65
Shevkunova AV (2016) The choice of optimization method for subcool zone switched-reluctance motor. Modern science: problems and prospects 3–2:248–251
Kashuba VA (2016) Improvement of operational characteristics of the traction motor of the switched-reluctance type. Proceedings of Rostov state University of Railway Engineering 3:62–83
Klochkova NN (2010) Study of the effect of clearance between the induction heating of solids of revolution complex forms Vestnik of Samara state technical University. Series: Technical Sciences, 2:161–165
Petrushin AD (2017) Optimization calculation and experimental research of switched-reluctance-machines. Internet-journal Science of Science, 9(2):1–10
Shevkunov VA (2016) Design of switched-reluctance motor as a hub in the system variable speed drive with the use of optimization algorithms. Internet-journal Science of Science, 8(4):1–13
Volodin GI, Bakhvalov AU et al (2014) The synthesis of the geometry of the perforated layer of the inductor of a linear induction motor. Bulletin of all-Russian Scientific Research and Design Institute of Electric Locomotive Engineering 1(67):38–43
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Kuimov, D.N., Pavlenko, A.V. (2019). Design of the Inductor as Knot of the Electromechanical Converter with a Secondary Discrete Part. In: Radionov, A., Kravchenko, O., Guzeev, V., Rozhdestvenskiy, Y. (eds) Proceedings of the 4th International Conference on Industrial Engineering. ICIE 2018. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-319-95630-5_258
Download citation
DOI: https://doi.org/10.1007/978-3-319-95630-5_258
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-95629-9
Online ISBN: 978-3-319-95630-5
eBook Packages: EngineeringEngineering (R0)