Abstract
The article considers the technique and results of computational studies of the acoustic characteristics of the elements and the motor vehicle intake system. It describes the purpose and operation characteristics of the intake system. It is noted that the waves occurring in the intake tract, the nature of which depends on the geometry of the intake tract and the operating mode of the engine, determine the acoustic characteristics of the intake system and can improve or worsen the filling of the cylinders. Adding Helmholtz resonators to the manifolds improves the acoustic characteristics of the intake system depending on the engine speed and maximizes filling of cylinders for different speed modes. This allows to increase the power, economic, environmental performance of the engine and reduce the gas-dynamic noise emitted by the cutoff of the intake tract. A resonator was developed on the basis of finite element modeling to replace the connecting pipe of the air supply hose of hot air for improving the acoustic characteristics of motor vehicle intake system. The range of transmission loss (TL) of intake system has been calculated to evaluate the performance of the elements and the intake system in acoustical performance. The overall level of sound pressure at idling speed is determined by radiation in the frequency range 100–5000 Hz. In this range, in most one-third octave, the resonator lowers the sound pressure up to 5 dBA.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Malkin IV (2014) Development of technical means for reducing noise emissions of the gas-exchange system of a car engine: the thesis of a Candidate of technical sciences: 05.04.02. Moscow, 201 p
Rakhmatov RI, Galevko VV, Nadareishvili GG, Yudin SI (2014) Trends in the development of exhaust gas processing systems for modern cars. Nat Tech Sci 6(74)
Lukanin VN, Galevko VV (1984) The results of vibroacoustic research of the automobile V-shaped diesel engine 8 h 110. 115.-V: reduction of noise of piston engines. Collection of scientific papers MADI, pp 25–36
Komkin AI, Yudin SI (2005) Chamber noise silencers. Suppl J Life Saf 11:24
Ivanov NI (2008) Engineering acoustics. Theory and practice of noise control: a textbook. University Book, Logos, Moscow, 424 p
Galevko VV, Isaev VV, Kuzmin NP (1984) The study of the acoustic characteristics of the main sources of diesel noise 8 h 110/115. In the book: Designing, research, technology and economy of car production. Sat Scientific Works ZIL, vol 12, pp 14–22
Galevko VV, Rakhmatov RI (2014) Modern methods of noise reduction in vehicles, Sci Rev 8.3
Galevko VV, Nadareishvili GG (2011) Method and results of the investigation of the main sources of noise in a four-cylinder diesel engine on a motor-driven test bed. Vector Togliatti State Uni 2:104–108
Vasiliev AV (2004) Acoustic modeling and complex noise reduction of automobile internal combustion engines: monograph. Publishing House of the Samara Scientific Center of the Russian Academy of Sciences, Samara, 296 p
Lukanin VN, Alekseev IV, Galevko VV, Isaev VV, Platov AV (1984) Technique and results of noise research from separate external surfaces of diesel ZIL-645. In: Design, technology and economy of automobile production: Sat Scientific. Tr. / ZIL-NIIavtoprom, Moscow, no 13, 15 p
Galevko VV (2014) Calculation method for determining design solutions for the reduction of sound radiation from the outer surfaces of unloaded parts of ICE. In: Modern problems of the theory of machines: proceedings of the II international correspondence scientific and practical conference. Publishing Center of SibGIU, Novokuznetsk, pp 162–170
Krasnov AV (2011) Development of means for increasing the efficiency of acoustic materials and structures to reduce the external and internal noise of cars: the author’s abstract. Dissertation, Togliatti
Kudaev AV (2011) The noise reduction of power plants of road construction machines with soundproof hoods: the author’s abstract. Dissertation, PSP
Galevko VV, Rakhmatov RI (2017) Calculation and experimental investigation of exhaust gas processing systems. Bull of the Samara Univ. Aerosp Technol Mech Eng 16(3):145–154
Galevko VV, Rakhmatov RI (2016) Constructive solutions for the reduction of sound radiation from the outer surfaces of the SOG. Bull Moscow Automobile Road Constr State Tech Univ (MADI) 3(46):3–10
Galevko VV, Rakhmatov RI (2015) Development of finite element models and computational and experimental research of exhaust gas processing systems. Sci Rev 22:129–135
Galevko VV (2005) Theoretical background and results of an experimental investigation of the ICE noise from the combustion process using the correlation-spectral theory. Vestnik MADI (GTU) 4:36–43
Galevko VV, Nadareishvili GG, Yudin SI (2013) Perfection of the method of calculation and experimental determination of the acoustic characteristics of the exhaust system elements. Vector Sci Togliatti State Univ 3(25):124–127
Nikiforov NA, Komkin AI (2011) Determination of the structural factor of fibrous metallic sound-absorbing materials. Izvestiya Vuzov. Mech Eng 35–43
Galevko VV, Nadareishvili GG, Yudin SI (2013) Determination of the parameters of dissipative and catalytic materials of elements of the exhaust gas processing systems necessary for their design by finite element modeling. Vector Togliatti State Univ 2(24):117–122
Galevko VV, Nadareishvili GG, Rakhmatov RI et al (2014) Determination of acoustic characteristics of catalytic blocks of exhaust gas processing systems. In: 2nd international scientific and technical conference “Dynamics and vibroacoustics of machines 2014”, Collection of articles, Samara, pp 493–498
Galevko VV, Galevko YuV, Ereshchenko VE (2003) Research and development of the car on acoustic indicators in bench conditions. Bull Moscow Automobile Road Inst (State Tech Uni) 1:72–75
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Nadareishvili, G.G., Galevko, V.V., Rakhmatov, R.I. (2019). Improvement of Acoustic Characteristics of Motor Vehicle Intake System Based on Calculation and Experimental Research. In: Radionov, A., Kravchenko, O., Guzeev, V., Rozhdestvenskiy, Y. (eds) Proceedings of the 4th International Conference on Industrial Engineering. ICIE 2018. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-319-95630-5_249
Download citation
DOI: https://doi.org/10.1007/978-3-319-95630-5_249
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-95629-9
Online ISBN: 978-3-319-95630-5
eBook Packages: EngineeringEngineering (R0)