Skip to main content
SpringerLink
Log in

Processes Dynamic Characteristics in the Intake System of Piston Internal Combustion Engine

  • Conference paper
  • First Online:
Proceedings of the 4th International Conference on Industrial Engineering (ICIE 2018)

Part of the book series: Lecture Notes in Mechanical Engineering ((LNME))

Included in the following conference series:

  • 103 Accesses

Abstract

The experimental studies of gas dynamic and heat exchange characteristics of processes in the intake system were carried out on the full-scale model of a piston engine. The experimental setup and the instrumentation and measurement base for this study are briefly described. The experimental data on the dynamics of changes in airflow velocity and instantaneous local heat transfer in the intake system of a piston engine are presented in the article. The amplitude–frequency analysis of the considered flow parameters is carried out. It is shown that the intensity of local heat transfer in the intake system in a pulsating flow is much lower than for a stationary flow, and this difference reaches 2.5 times.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Log in via an institution
Chapter
USD 29.95
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
eBook
USD 259.00
Price excludes VAT (USA)
  • Available as EPUB and PDF
  • Read on any device
  • Instant download
  • Own it forever
Softcover Book
USD 329.99
Price excludes VAT (USA)
  • Compact, lightweight edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

References

  1. Zhu Q, Yuan Z et al (2012) Numerical simulation of gas exchange process in two stroke reverse-loop scavenging engines. Adv Mater Res 468–471:2259–2264. https://doi.org/10.4028/www.scientific.net/AMR.468-471.2259

    Article  Google Scholar 

  2. Gazeaux J, Thomas DG (2001) Characterization of swirl under steady flow in a single cylinder diesel engine with different inlet conditions. Entropie 234:12–19

    Google Scholar 

  3. Huber EW, Koller T (1977) Pipe friction and heat transfer in the exhaust pipe of a firing combustion engine. In: 12th international congress on combustion engines (CIMAC), Tokyo, 22 May–1 June 1977

    Google Scholar 

  4. Nuutinen M, Kaario O et al (2010) Advanced heat transfer modeling with application to CI engine CFD simulations. In: 26th world congress on combustion engine (CIMAC), Bergen NO, 14–17 June 2010

    Google Scholar 

  5. Jefros VV, Golev BJu (2007) Numerical study of inlet channels. Dvigatelestroen 4:24–27

    Google Scholar 

  6. Nanda SK, Jia et al (2017) Investigation on the effect of the gas exchange process on the diesel engine thermal overload with experimental results. Energies 10(6):766. https://doi.org/10.3390/en10060766

    Article  Google Scholar 

  7. Gocmez T, Lauer S (2010) Fatigue design and optimization of diesel engine cylinder heads. In: 26th world congress on combustion engine (CIMAC), Bergen NO, 14–17 June 2010

    Google Scholar 

  8. Grishin YA, Zenkin VA et al (2017) Boundary conditions for numerical calculation of gas exchange in piston engines. J Eng Phys and Thermophys 4:1–6. https://doi.org/10.1007/s10891-017-1644-4

    Article  Google Scholar 

  9. Zhilkin BP, Lashmanov VV et al (2015) Improvement of processes in the gas-air tracts of piston internal combustion engines. Ural Publishers of the University, Yekaterinburg

    Google Scholar 

  10. Plokhov SN, Plotnikov LV, Zhilkin BP (2009) Thermoanemometer of the constant temperature. RU Patent 81338, 10 Mar 2009

    Google Scholar 

  11. Plotnikov LV, Zhilkin BP (2017) The gas-dynamic unsteadiness effects on heat transfer in the intake and exhaust systems of piston internal combustion engines. Int J Heat and Mass Trans 115:1182–1191. https://doi.org/10.1016/j.ijheatmasstransfer.2017.08.118

    Article  Google Scholar 

  12. Plotnikov LV, Zhilkin BP et al (2016) The influence of cross-profiling of inlet and exhaust pipes on the gas exchange processes in piston engines. Proc Engine 150:111–116. https://doi.org/10.1016/j.proeng.2016.06.729

    Article  Google Scholar 

  13. Plotnikov LV, Zhilkin BP et al (2015) Influence of high-frequency gas-dynamic unsteadiness on heat transfer in gas flows of internal combustion engines. Ap Mech Mater 698:631–636. https://doi.org/10.4028/www.scientific.net/AMM.698.631

    Article  Google Scholar 

  14. Vikhert MM, Grudsky YuG (1982) Design of intake systems for high-speed diesels. In: Mechanical engineering, Moscow

    Google Scholar 

  15. Draganov BKh, Kruglov MG et al (1987) Design of the intake and exhaust ducts of the internal combustion engines. Vischa shk. Head Publishing House, Kiev

    Google Scholar 

  16. Heywood JB (1988) Internal combustion engine fundamentals. McGraw-Hill, New York

    Google Scholar 

  17. Lukanin VN, Morozov KA et al (1995) Internal combustion engines. In: Mechanical engineering, Moscow

    Google Scholar 

  18. Plotnikov LV, Zhilkin BP (2017) The influence of piston internal combustion engines intake and exhaust systems configuration on local heat transfer. Proc Engine 206:80–85. https://doi.org/10.1016/j.proeng.2017.10.441

    Article  Google Scholar 

  19. Valueva EP (2006) Heat transfer in pulsating turbulent gas flow in a pipe in the context of resonant oscillations. Proc Rus Acad Sci 4:470–475

    Google Scholar 

  20. Kraev VM, Tikhonov AI (2011) Model of the influence of the hydrodynamic unsteadiness on the turbulent flow. N Rus Acad Sci 1:112–118

    Google Scholar 

  21. Simakov NN (2016) Calculation of resistance and heat transfer of a ball in the laminar and highly turbulent gas flows. Rus J Appl Phys 12:42–48. https://doi.org/10.1134/S1063784216120252

    Article  Google Scholar 

Download references

Acknowledgements

The work has been supported by the Russian Science Foundation 18-79-10003.

Author information

Authors and Affiliations

  1. Ural Federal University Named After the First President of Russia B. N. Yeltsin, 19, Mira st., Yekaterinburg, 620002, Russia

    L. V. Plotnikov & Yu. M. Brodov

Authors
  1. L. V. Plotnikov
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Yu. M. Brodov
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to L. V. Plotnikov .

Editor information

Editors and Affiliations

  1. South Ural State University, Chelyabinsk, Russia

    Andrey A. Radionov

  2. Platov South-Russian State Polytechnic University, Novocherkassk, Russia

    Oleg A. Kravchenko

  3. South Ural State University, Chelyabinsk, Russia

    Victor I. Guzeev

  4. South Ural State University, Chelyabinsk, Russia

    Yurij V. Rozhdestvenskiy

Rights and permissions

Reprints and permissions

Copyright information

© 2019 Springer Nature Switzerland AG

About this paper

Check for updates. Verify currency and authenticity via CrossMark

Cite this paper

Plotnikov, L.V., Brodov, Y.M. (2019). Processes Dynamic Characteristics in the Intake System of Piston Internal Combustion Engine. In: Radionov, A., Kravchenko, O., Guzeev, V., Rozhdestvenskiy, Y. (eds) Proceedings of the 4th International Conference on Industrial Engineering. ICIE 2018. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-319-95630-5_2

Download citation

  • DOI: https://doi.org/10.1007/978-3-319-95630-5_2

  • Published:

  • Publisher Name: Springer, Cham

  • Print ISBN: 978-3-319-95629-9

  • Online ISBN: 978-3-319-95630-5

  • eBook Packages: EngineeringEngineering (R0)

Publish with us

Policies and ethics

Search

Navigation