Abstract
One of the reasons for the inefficient use of powered support due to the dislocation of the direction of movement of the powered support unit relative to the face conveyor in the formation plane is identified. The substantiation of the structural parameters of the connection of the eye of the cap of pile of the movement mechanism of the linear powered support unit with the eyes of the face conveyor was carried out. The dependence of the angle of rotation of the eye cap of pile of the movement mechanism in the eyes of the face conveyor is determined. The necessity of installing armored powered support unit equipped with rod transfer mechanisms is substantiated in the lower part of the breakage face. The developed design of the movement mechanism of the anchor sections is of the same design as the movement mechanism of the linear powered support unit and differs only by the cap of pile. The cap of pile of the anchor sections has two spaced lugs that are pivotally connected through axes to the eyelets of the face conveyor. The proposed mechanism for moving the anchor sections provides for the directional movement of powered support which significantly increases the efficiency of the complex.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Ivko VI (1971) Orientation of powered supports in the plane of the formation. Nedra, Moscow
Korovkin YA (1990) Powered supports for cleaning faces. Nedra, Moscow
Myshlyaev BK, Coal JL (1994) The results of the work of sewage treatment plants at the mines of the Russian Federation and West Germany. pp 11–15
Jacobi O (1987) Practice of controlling the mountain pressure. Nedra, Moscow
Dokukin AV, Korovkin YA (1984) Powered supports and their development. Nedra, Moscow
Horin VN (1988) Calculation and construction of powered supports. Nedra, Moscow
GOST R 52152-2003 (2003) Fixing mechanized for lavas. Main settings. General technical requirements. Methods of testing
Sysoev NI, Turuk YV (2016) Design and construction of mechanized complexes: monograph. PSRSPU (NPI), Novocherkassk, pp 168–169
Turuk YV (2014) Methods for determining the strength and constructive parameters of mechanized fastenings of string complexes. Dissertation, PSRSPU
Lugantsev BB, Osherov BA (2007) Stripping of coal. “Onyx +”, Novocherkassk, pp 143–144
Sysoev NI, Turuk YV, Modern Problems of Science and Education (2013) Substantiation of the use of elastic elements in the construction of the movement mechanism of the shielded plow section of the powered support with the base of the catamaran type. No. 6. http://www.science-education.ru/113-11303
Sysoev NI, Turuk YV (2014) Modern problems of science and education. Justification of the use in the mechanism of moving the plow section of the support with a solid foundation of the rod-type pushers. No. 1. http://www.science-education.ru/115-11651
Turuk YV (2011) Prospects for the development of the eastern Donbass. Part 2: s.b. sci. tr. based on the materials of the 60th all-Russian scientific conference. In: Practical conference “Prospects for the development of the eastern Donbass, research and selection of the system of aggregation of powered support and plowing”, Shakhty Institute (branch) SRSTU (NPI), pp 12–17
Don-Falia (1995) Operation manual of the securing section BS2.1X. DBT, Germany
Chudakov EA (1950) Reference book of the machine builder. GNTIML, Moscow
Turuk YV (2011) Problems of geology, planetology, geoecology and rational nature-use: a collection of abstracts and articles of the all-Russian conference. In: Device for moving the section of the powered support, Novocherkassk, 26–28 Oct 2011, pp 240–243
Turuk YV (2012) Device for moving the section of powered support and moving the downhole conveyor of the plow system. Patent RF 114724, Bul. No. 10
Turuk YV (2013) Device for moving the section of the mechanized support and moving the downhole conveyor of the plow system. Patent RF 132491, Bul. No. 26
Turuk YV, Sysoev NI. The device for moving the section of the mechanized support and moving the downhole conveyor of the plow system. Patent RF 174709, Bul. No. 31
Sysoev NI, Turuk YV (2017) Basement of structure, main power and design parameters of mechanism of removing sections of mechanized sets of knife plane installation. IOP Publ IOP Conf Ser Earth Environ Sci 87:022022. https://doi.org/10.1088/1755-1315/87/2/022022
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Turuk, Y.V., Sysoev, N.I., Lugantsev, B.B. (2019). Substantiation of Structure and Basic Design Parameters of Devices for Orienting Powered Support Relatively to Face Conveyor in Formation Plane. In: Radionov, A., Kravchenko, O., Guzeev, V., Rozhdestvenskiy, Y. (eds) Proceedings of the 4th International Conference on Industrial Engineering. ICIE 2018. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-319-95630-5_180
Download citation
DOI: https://doi.org/10.1007/978-3-319-95630-5_180
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-95629-9
Online ISBN: 978-3-319-95630-5
eBook Packages: EngineeringEngineering (R0)