Abstract
The paper indicates that the application of roughness models and the theories of contacting rough surfaces developed by Greenwood–Williamson and N. B. Demkin for solving the problems of hermetology leads to significant errors. This is explained by much greater contact pressures than assumed for the tribology problems, describing only the initial part of the reference surface curve and the lack of allowance for the plastic extrusion of the material. A brief review of methods for describing the introduction of a sphere into an elastoplastic reinforced half-space is given. The properties of the elastoplastic reinforced material are described by the power law of Hollomon. To describe the indentation and flattening of single spherical asperity, the results of finite element modeling are used. The cases of contacting a rigid rough surface with an elastoplastic half-space and a rigid smooth surface with a rough surface are considered. To determine the relative contact area, the discrete roughness model is used in the form of a set of spherical segments distributed along the height in accordance with the curve of the reference surface.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Greenwood JA, Williamson JBR (1966) Contact of nominally flat sufaces. Proc Roy Soc A295:301–313
Demkin NB (1970) Contacting rough surfaces. Nauka, Moscow
Ogar PM, Gorokhov DB, Kozhevnikov AS (2017) Contact tasks in hermetic sealing studies of fixed joints. BrSU, Bratsk
Ogar PM, Gorokhov DB, Elsukov VK (2017) Criteria for the appearance of plastic deformations at contacting rough surfaces of joints in technological equipment. Syst Meth Tech 3(35):32–39. https://doi.org/10.18324/2077-5415-2017-3-32-39
Kazankin VA (2016) Development of a technique for calculating the strength of fixed joints, taking into account the contact stiffness of matched parts of close hardness. Dissertation, VolSTU, Volgograd
Lankov AA (2009) The probability of elastic and plastic deformations during compression of metallic rough surfaces. Trenie-i-smazka-v-mashinah-i-mekhanizmah 3:3–5
Voronin NA (2003) Theoretical model of elastic-plastic introduction of rigid sphere. J frict Wear 24:16–26
Ogar PM, Tarasov VA (2013) Kinetic indentation application to determine contact characteristics of sphere and elastoplastic half-space. Adv Mat Res 664: 625–631. www.scientific.net/AMR.664.625
Ogar PM, Tarasov VA, Turchenko AV (2013) Tribomechanics of elastoplastic contact. Modern Technol Syst Model 2(18):116–122
Drozd MS, Matlin MM, Sidyakin YI (1986) Engineering methods for calculating elastoplastic contact deformation. In: Mechanical engineering, Moscow
Lee H, Lee JH, Pharr GM (2005) A numerical approach to spherical indentation techniques for material property evaluation. J Mech Phys Solids 53:2037–2069
Collin JM, Mauvoisin G, Pilvin P (2010) Materials characterization by instrumented indentation using two different approaches. Mater Des 31:636–640
Johnson KL (1985) Contact mechanics. University Press, Cambridge
Hernot X, Bartier O, Bekouche Y, El Abdi R, Mauvoisin G (2006) Influence of penetration depth and mechanical properties on contact radius determination for spherical indentation. Int J Solids Struct 43:4136–4153
Myshkin NK, Petrokovec MI (2007) Friction, lubrication, wear. In: Physical bases and technical applications of tribology. Fizmatlit, Moscow
Bolotov AN, Meshkov VV, Sutyagin OV, Vasiliev MV (2013) Study of elastoplastic contact of a spherical indenter with metals and solid lubricating coatings: Part 1. Critical loads. J Friction Wear 34:1–5
Bolotov AN, Meshkov VV, Sutyagin OV, Vasiliev MV (2013) Study of elastoplastic contact of a spherical indenter with metals and solid lubricating coatings: Part 2. Contact characteristics. J Friction Wear 34:129–133
Ogar P, Gorokhov D (2017) Meyer law application to account of material hardening under rigid spherical indentation. In: Proceedings of 22nd international conference “MECHANIKA 2017”. KUT, Kaunas pp 287–290
Ogar P, Gorokhov D, Belokobylsky S (2017) The elastic-plastic contact of a single asperity of a rough surface. In: MATEC web of conferences vol 129, p 06017. https://doi.org/10.1051/matecconf/201712906017
Bulychev SI (2010) The transition from the indentation diagrams to the tensile diagrams with allowance for the hardened surface layer. Deformation Fract Mater 2:43–48
Bulychev SI (2011) Hardness and hysteresis at the yield strength. Deformation Fract Mater 1:41–45
Matlin M, Kazankina E, Kazankin V (2009) initial. Mechanika 2:20–23
Etision I, Kligerman Y, Kadin Y (2005) Unloading of an elastic–plastic loaded spherical contact. Int J Solids Struct 42:3716–3729
Kogut L, Etision I (2002) Elastic–plastic contact analysis of a sphere and a rigid flat. ASME J Appl Mech 69:657–662
Zhao JH, Nagao S, Zhang ZI (2012) Loading and aunloadingnloading of a spherical contact: From elastic to elastic-perfectly plastic materials. Int J Mech Sci 56:70–76
Ogar PM, Gorokhov DB (2017) Influence of materials hardenability parameters on the machine parts characteristics after unloading. Key Eng Mat 723:369–375. www.scientific.net/KEM.723.369
Ogar P, Gorokhov D, Ugryumova E (2017) Mechanics of unloading of a rough surfaces pre-loaded joint. In: MATEC Web of conference vil 129, p 06016. https://doi.org/10.1051/matecconf/201712906016
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Ogar, P., Gorokhov, D., Ugryumova, E. (2019). Relative Contact Area by Indentation and Flattening of Rough Surfaces Spherical Asperities. In: Radionov, A., Kravchenko, O., Guzeev, V., Rozhdestvenskiy, Y. (eds) Proceedings of the 4th International Conference on Industrial Engineering. ICIE 2018. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-319-95630-5_100
Download citation
DOI: https://doi.org/10.1007/978-3-319-95630-5_100
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-95629-9
Online ISBN: 978-3-319-95630-5
eBook Packages: EngineeringEngineering (R0)