Abstract
The desire for smart “lights out factories” which can autonomously produce components for high value manufacturing industries is described by the Industry 4.0 solution. This manufacturing methodology is appropriate for newly designed components, which take advantage of modern materials, robotic and automation processes, but not necessarily applicable to overhaul and repair. The aerospace overhaul and repair industry remains heavily dependent on human engineering skills to develop repair and re-manufacturing techniques for complex components of high value.
Development of any advanced, intelligent multi-agent robotic additive re-manufacturing system requires correct interrogation of metallic materials thermal properties, system control and output. Advanced programming of robots, data interpretation from associated sensory and feedback systems are required to mirror human input. Using process analysis to determine stimuli, replacement of human sensory receptors with electronic sensors, vision systems and high-speed data acquisition and control systems allows for the intelligent fine tuning of multiple heat input parameters to deposit the additive material at any one time. The interaction of these key components combined with novel robotic technology and experienced welding engineers has made possible the construction of a disruptive robotic re-manufacturing technology.
This paper demonstrates the design process and analyses the outputs sourced from observation and the recording of highly skilled human engineers when conducting manual remanufacturing and repair techniques. This data is then mined for the transferable control input parameters required to replicate and improve human performance.
This industry-academia research intensive collaboration between VBC Instrument Engineering Limited (UK) and The University of Sheffield has received project funding from the Engineering and Physical Sciences Research Council (EPSRC, 2006–2010), the Science and Facilities Technology Council (STFC, 2011–2013) and Innovate-UK with the Aerospace Technology Institute (2014–2018).
This work is supported by Innovate-UK.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Denkena, B., et al.: Engine blade regeneration: a literature review on common technologies in terms of machining. Int. J. Adv. Manuf. Technol. 81, 917–924 (2015)
Yilmaz, O., et al.: A repair and overhaul methodology for aeroengine components. Robot. Comput.-Integr. Manuf. 26, 190–201 (2010)
French, R., Marin-Reyes, H.: High value intelligent aerospace turbofan jet engine blade re-manufacturing system. In: Schlick, C., Trzcieliński, S. (eds) AHFE Advances in Intelligent Systems and Computing, vol. 490. Springer, Cham (2016)
Geng, J., et al.: A design method for three-dimensional maintenance, repair and overhaul job card of complex products. Comput. Ind. 65, 200–209 (2014)
Zhang, Z., et al.: A cloud-based framework for lean maintenance, repair, and overhaul of complex equipment. J. Manuf. Sci. Eng. 137, 11 (2015)
Ulhmann, E., et al.: MRO – challenge and chance for sustainable enterprises. In: 2nd International Through-life Engineering Services Conference (2013)
Compressor blades repair and overhaul. Rolls-Royce Plc Internal Report (2002)
French, R., Marin-Reyes, H.: Welding performance evaluation of the VBCie IP50 TIG orbital heat management system. In: IIW International Conference, High-Strength Materials - Challenges and Applications, Helsinki, Finland, July 2015
French, R., et al.: Real-time welding evaluation system assessment using the TIG orbital welding process on ultra-thin wall tube joints in titanium and stainless steel. In: IIW International Conference, Green Welding Technologies for Effective and Reliable Manufacturing, Shanghai, China, June 2017
French, R., et al.: Advanced real-time weld monitoring evaluation demonstrated with comparisons of manual and robotic TIG welding used in critical nuclear industry fabrication. In: Trzcielinski, S. (eds) AHFE 2017, Advances in Intelligent Systems and Computing, vol. 606. Springer, Cham
French, R., et al.: Intelligent sensing for robotic re-manufacturing in aerospace — An industry 4.0 design based prototype. In: IEEE International Symposium on Robotics and Intelligent Sensors (IRIS), Ottawa, ON, pp. 272–277 (2017)
French, R., et al.: A Robotic re-manufacturing system for high-value aerospace repair and overhaul. In: Chen, S., Zhang, Y., Feng, Z. (eds.) Transactions on Intelligent Welding Manufacturing. Springer, Singapore (2017)
Acknowledgments
The authors would like to thank Mr Andrew Rendell-Read (VBCie Ltd). We are very grateful to the Nuclear AMRC SIMPLE Phase I project team of Professor Keith Bridger, especially Samantha Biddleston for their input to the manual welding trials.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer International Publishing AG, part of Springer Nature
About this paper
Cite this paper
French, R., Marin-Reyes, H., Benakis, M. (2019). Transfer Analysis of Human Engineering Skills for Adaptive Robotic Additive Manufacturing in the Aerospace Repair and Overhaul Industry. In: Karwowski, W., Trzcielinski, S., Mrugalska, B., Di Nicolantonio, M., Rossi, E. (eds) Advances in Manufacturing, Production Management and Process Control. AHFE 2018. Advances in Intelligent Systems and Computing, vol 793. Springer, Cham. https://doi.org/10.1007/978-3-319-94196-7_1
Download citation
DOI: https://doi.org/10.1007/978-3-319-94196-7_1
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-94195-0
Online ISBN: 978-3-319-94196-7
eBook Packages: EngineeringEngineering (R0)