Abstract
The main function of an automatic balancing device is to balance the axial force in multi-stage centrifugal pumps. The advantage of this method of axial force balancing is the self-regulation of the device parameters. This allows balancing the axial force at different pump operating modes. In classic designs, the static characteristic (dependence of the hydrodynamic axial force of the device on the face gap), as well as the flow rate characteristic of the balancing device, are substantially determined by the cylindrical gap geometry. A middle gap of the cylindrical throttle, as well as its conductivity, is a random function due to manufacturing tolerances and possible erosive wear of sealing surfaces under pump operation. The paper presents the method of calculating the flow rate characteristics of the device with the random changes in the middle gap during operation of the pump, as well as the influence of random changes in local hydraulic resistances and parameter taper of face gap. The analysis of the influence of each of the considered random factors is made. Probabilistic characteristics of the pump efficiency are determined.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Marcinkovskij, V., Shevchenko, S.: Pumps of Nuclear Power Plants: Calculation, Design, Operation: Monograph. University book, Sumy (2018). [in Russian]
Pak, P., Belousov, A., Belousov, A.: Pumping Equipment for Nuclear Power Plants. Energoatomizdat, Moscow (2003). [in Russian]
Czegurko, L.: Centrifugal energy pumps, their malfunctions and tuning methods, Chelyabinsk (2002) [in Russian]
Korczak, A.: Investigation of balancing systems of axial thrust in multistage centrifugal pumps, Ed. Silesian University of Technology, Gliwice (2005) [in Polish]
Korczak, A., Martsynkovskyy, V., Peczkis, G., Zahorulko, A.: Diagnosis of the phenomenon of flow as an inspiration to inventions in the domain of constructing hydraulic machines. Procedia Eng. 39, 286–302 (2012)
Korczak, A., Papierski, A.: The flow through the face clearance of disk relieving the axial force in multi-stage centrifugal pump. Trans. Inst. Fluid-Flow Mach. N115, 125–142 (2004)
Verbovyi, A., Neamtu, C., Sieryk, M., Vashyst, B., Pavlenko, V., Simonovskiy, V., Pavlenko, I.: Ensuring the vibration reliability of rotors connected by spline joints. J. Eng. Sci. 6(2), D14–D19 (2019). https://doi.org/10.21272/jes.2019.6(2).d3
Jedral, W.: Turbulent fluid flow in hydraulically smooth transverse joints. Machine-building archive T. XXVIII, №1, pp. 39–53 (1981). [in Polish]
Jedral, W.: Methods for calculating longitudinal forces and unloading systems in vortex pumps, Scientific Works. Mechanics z 110, PW Publishing house (1988) [in Polish]
Karaskiewicz, K.: Investigation of Internal Flows in Pumps in Terms of Calculating Hydraulic Forces. Publishing house of the Warsaw University of Technology, Warsaw (2013). [in Polish]
Bolotin, V.V.: Methods of Probability Theory and Probability Theory in Calculations of Structures. Strojizdat, Moscow (1982). [in Russian]
Tarasevych, Y., Savchenko, I., Sovenko, N., Savchenko, A.: Research of influence of random change of annular seal parameters on efficiency of centrifugal pump. Eastern-Euro. J. Enterprise Technol. 6(7(84)), 37–42 (2016)
Tarasevych, Y., Sovenko, N., Savchenko, I.: Influence of the stochastic nature parameters of throttle channels on characteristic of automatic balancing device of the centrifugal pump. In: Ivanov V., et al. (eds.) Advances in Design, Simulation and Manufacturing. DSMIE 2018. Lecture Notes in Mechanical Engineering. Springer, Cham (2019)
Tarasevych, Y., Sovenko, N.: Modeling the influence of cylindrical throttle erosion wear on characteristics of automatic balancing device. Tribologia 285(3), 107–113 (2019)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Tarasevych, Y., Savchenko, I., Sovenko, N. (2020). Estimation of Random Flow-Rate Characteristics of the Automatic Balancing Device Influence on Centrifugal Pump Efficiency. In: Ivanov, V., Pavlenko, I., Liaposhchenko, O., Machado, J., Edl, M. (eds) Advances in Design, Simulation and Manufacturing III. DSMIE 2020. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-50491-5_11
Download citation
DOI: https://doi.org/10.1007/978-3-030-50491-5_11
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-50490-8
Online ISBN: 978-3-030-50491-5
eBook Packages: EngineeringEngineering (R0)