Abstract
The study carried out measurement survey of HoaCam wastewater treatment plant (WWTP) in DaNang City, Vietnam. Based on ASM1 model, simulation of this wastewater treatment plant is implemented to determine relative parameters of the model in Vietnamese conditions closest to the measurement results. After that, optimization of the design and operation of the WWTP to have more efficiency. The simulation results show that it is quite accurate with the actual operation conditions of HoaCam WWTP. The optimization results show that the construction size is greatly reduced compared to the actual design of the HoaCam WWTP. This shows that the HoaCam plant has a waste of investment and energy consumption without meeting discharge standards.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Alasino N, Mussati MC, Scenna N (2007) Wastewater treatment plant synthesis and design. Ind Eng Chem Res 46(23):7497
Alex J et al (2001) The COST simulation benchmark: description and simulator manual. COST Action 624 and COST Action 682
Chachuat B, Roche N, Latifi MA (2001) Dynamic optimisation of small size wastewater treatment plants including nitrification and denitrification processes. Comput Chem Engng 25:585–593
Chachuat B, Roche N, Latifi MA (2005a) Long-term optimal aeration strategies for small-size alternating activated sludge treatment plants wastewater treatment plants. Chem Engng Proc 44:593–606
Chachuat B, Roche N, Latifi MA (2005b) Optimal aeration control of industrial alternating activated sludge plants. Biochem Engng J 23:277–289
Cuthrell JE, Biegler LT (1987) On the optimization of differential-algebraic process systems. AIChE J 33(8):257
Cuthrell JE, Biegler LT (1989) Simultaneous optimization and solution methods for batch reactor control profiles. Comput Chem Eng 13(1/2):49
Fikar M, Chachuat B, Latifi MA (2005) Optimal operation of alternating activated sludge processes. Cont Engng Pract 13:857–861
Gillot S et al (1999) Optimization wastewater treatment plant design and operation using simulation and cost analysis. In: 72nd annual conference WEFTEC 1999, 9–13 October, New Orleans, USA
Goh CJ, Teo KL (1988) Control parameterization: a unified approach to optimal control problems with general constraints. Automatica 24:3–18
gProms (1997–2009) Process systems enterprise. www.psenterprise.com
Gujer W, Henze M, Mino T, van Loosdrecht MCM (1999) Activated sludge model no. 3. Water Sci Technol 39(1)
Henze M et al (1987) Activated sludge model no. 1. Technical Report 1, IAWQ, London
Henze M et al (1995) Activated sludge model no. 2. IAWQ Scientific and Technical Report No. 3, London, UK
Henze M et al (1999) Activated sludge model no. 2D, ASM2D. Water Sci Technol 39(1):165–182
Manh LD, Thuy LTL (2014) Study on beer wastewater treatment
Nguyen NX, Hai PH (2003) Theory and modeling of biological wastewater treatment process
Teo KL, Goh CJ, Wong KH (1991) A unified computational approach to optimal control problems. Wiley, New York
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Nguyen, D.H., Latifi, M.A. (2020). Simulation and Optimization of Hoa Cam Wastewater Treatment Plant. In: Jeon, HY. (eds) Sustainable Development of Water and Environment. ICSDWE 2020. Environmental Science and Engineering(). Springer, Cham. https://doi.org/10.1007/978-3-030-45263-6_20
Download citation
DOI: https://doi.org/10.1007/978-3-030-45263-6_20
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-45262-9
Online ISBN: 978-3-030-45263-6
eBook Packages: Earth and Environmental ScienceEarth and Environmental Science (R0)