Abstract
Progressing Cavity Pump (PCP), also known as Moineau pump, is an artificial lift method often used for pumping high viscosity and high solids content fluids from producing wells.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Al-Safran E, Aql A, Nguyen T (2017) Analysis and prediction of fluid flow behavior in progressing cavity pumps. J Fluids Eng 139(121):102–111
Ba S, Pushkarev M, Anton K, Lijun S, Ling Ling Y (2016) Positive displacement motor modeling: skyrocketing the way we design, select, and operate mud motors. In: 183298-MS SPE conference paper
Baldenko D, Baldenko F, Gnoevykh A (2005) Single-screw hydraulic machines: volume 1 and 2. IRTs Gazprom
Beauquin J, Boireau C, Lemay L, Seince L (2005) Development status of a metal progressing cavity pump for heavy oil and hot production wells. In: SPE international thermal operations and heavy oil symposium, Alberta, Canada, November 2005
Becerra O, Mena ME (2007) Integrated analysis for PCP systems. In: SPE 107899 presented at the SPE Latin American and Caribbean petroleum engineering conference, Buenos Aires, Argentina, April 2007
Briggs PJ, Baron PR, Fulleylove RJ et al (1988) Development of heavy-oil reservoirs. J Pet Technol 40(2):206–214. SPE-15748-PA
Cholet H (1997) Progressing cavity pumps. Editions Technip, Paris
Cougar Drilling Solutions (2012) Motor operations handbook. Version 5.0
Gamboa J, Aurelio O, Sorelys E (2003) New approach for modeling progressive cavity pumps performance. In: SPE 84137 presented at the SPE annual technical conference and exhibition. Denver, Colorado, October 2003
Gamboa J, Olivet A, Iglesias J, Gonzalez P (2003) Understanding the performance of a progressive cavity pump with a metallic stator. In: Presented at the 20th international pump users symposium program. Houston, Texas, March 2003
Li J, Tudor R, Ginzburg L, Robello G, Xu H, Grigor C (1998) Evaluation and prediction of the performance of positive displacement motor. In: SPE international conference on horizontal well technology, Alberta, Canada, November 1998
Makohl F, Jurgens R (1986) Evolution and differences of directional and high-performance downhole motors. In: Presented at the IADC/SPE drilling conference held in Dallas, TX, February 1986—IADC/SPE 14742
Martinez AR (1987) The orinoco oil belt. J Petrol Geol 10:125, Venezuela
Meyer RF, Mitchell RW (1987) A perspective on heavy and extra heavy oil, natural bitumen, and shale oil. In: Paper presented at the 1987 twelfth world petroleum congresses, Houston
Mitchell R, Miska S (2011) Fundamentals of drilling engineering. Soc Petrol Eng 12. SPE Textbook Series
Moineau J (1932) “Pompe” Patent US No. 1 892 217, 27 December 1932
Nguyen TC, Tu H, Al-Safran E, Saasen A (2016) Simulation of single-phase liquid flow in progressing cavity pump. J Petrol Sci Eng 147:617–623
Nguyen K, Nguyen T, Al-Safran E (2019) Experimental and theoretical study on slippage effect of pcp performance. MLF59—Presented at the Middle East Artificial Lift Forum, Oman 2019
Nguyen TC, Al-Safran E, Saasen A, Nes, OM (2014) Modeling the design and performance of progressing cavity pump using 3-D vector approach. J Petrol Sci Eng 122:180–186
Nguyen T, Al-Safran E, Nguyen V (2018) Theoretical modeling of positive displacement motors performance. J Pet Sci Eng 166:188–197
Noble E, Dunn L (2011) Pressure distribution in progressing-cavity pumps: test results and implications for performance and run life. SPE 153944 Submitted to SPE for a reprint volume
Noonan S (2008) The progressing cavity pump operating envelope: you cannot expand what you don’t understand. In: SPE international thermal operations and heavy oil symposium, Calgary, Canada, October 2008
Noonan S, Langer D, Klaczek W, Yip C (2013) Technical challenges and learnings from a high temperature metallic progressing cavity pump test. In SPE progressing cavity pumps conference, Calgary, Canada, August 2013
Paladino E, Lima J, Almeida R, Assmann B (2008) Computational modeling of the three-dimensional flow in a metallic stator progressing cavity pump. In: SPE 114110 presented at the SPE progressing cavity pump conference held in Houston, Texas, April 2008
Pessoa P, Paladino E, De Lima J (2009) A simplified model for the flow in a progressive cavity pump. In: Presented at the COBEM conference, Gramado, Brazil, November 2009
PetroWiki PEH (2015) Progressing cavity pumping systems. Modified on June 2015
Rassenfoss S (2013) New uses keep emerging for a deceptively simple pump. J Petrol Technol 65(10)
Roberts B, Mohr C (1972) Down-hole motors for improved drilling. J Petrol Technol (JPT) 3343:1484–1490
Robles J (2001) Another look to multilobe progressive cavity pump. In: SPE progressing cavity pump workshop, Puerto La Cruz, January 2001
Samuel R, Miska S (2003) Performance of positive displacement motor (PDM) operating on air. J Energy Res Technol 125:119–125
Samuel R, Miska S, Volk L (1997) Analytical study of the performance of positive displacement motor (PDM): modeling for incompressible fluid. In: Presented at the fifth latin American and caribbean petroleum conference and exhibition held in Rio de Janeiro, Brazil, September 1997—SPE 39026
Vetter G, Wirth W (1995) Understand progressing cavity pumps characteristics and avoid abrasive wear. In: Presented at the 12th international pump users symposium program. Houston, Texas
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this chapter
Cite this chapter
Nguyen, T. (2020). Progressing Cavity Pump. In: Artificial Lift Methods. Petroleum Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-40720-9_4
Download citation
DOI: https://doi.org/10.1007/978-3-030-40720-9_4
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-40719-3
Online ISBN: 978-3-030-40720-9
eBook Packages: EnergyEnergy (R0)