Abstract
In the research of vehicle dynamics various specialized test rigs are designed for specific elements or systems analysis. Expecting the reliable results all possible uncertainties and side effects should be known in advance. In this paper the analysis of special designed quarter car test rig is presented before its further use in wheel/tire, suspension or its complex research. After explaining the construction, its operation and application an experimental modal analysis and validation of test rig with on-road driving was done in order to find out any uncertainties. Different performance in separate frequency ranges of specific construction locations is identified. This is explained by the influence of unsymmetrical inner frame, suspension side mounting and wheel rotation dynamics. Finally further research possibilities using designed test rig and its options for vehicle components and separate systems including control strategies are presented proving the importance of reliable dynamic tests in laboratory conditions before on-road driving.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Arati, C., Pooja, S., Vinod, B.Y., Pradip, D.U., Londhe, B.C.: A review of design of shock absorber test rig. Int. Res. J. Eng. Technol. 4(3), 2136–2140 (2017)
Konieczny, L.: Analysis of simplifications applied in vibration damping modelling for a passive car shock absorber. Shock Vibr. 2016, 1–9 (2016)
Konieczny, L., Burdzik, R., Folega, P., Wieczorek, A.: Determination of the damping characteristics of hydro pneumatic suspension strut. J. Meas. Eng. 1(3), 155–158 (2013)
Li, D., Lu, Y., Li, L.: Dynamical test and modeling for hydraulic shock absorber on heavy vehicle under harmonic and random loadings. Res. J. Appl. Sci. Eng. Technol. 4(13), 1903–1910 (2012)
Van der Merwe, N., Schalk, E.P., Žuraulis, V.: ABS braking on rough terrain. J. Terrramech. 80, 49–57 (2018)
Koch, G., Kloiber, T.: Driving state adaptive control of an active vehicle suspension system. IEEE Trans. Control Syst. Technol. 22(1), 1–14 (2013)
Pletschen, N.: Nonlinear H2 control of a low-bandwidth active vehicle suspension system using Takagi-Sugeno methods. In: Proceedings of the 13th International Symposium on Advanced Vehicle Control (AVEC 2016), Munich, Germany, pp. 663–672 (2016)
Heidrich, L., Shyrokau, B., Savitski, D., Ivanov, V., Augsburg, K., Wang, D.: Hardware-in-the-loop test rig for integrated vehicle control systems. In: 7th IFAC Symposium on Advances in Automotive Control, pp. 683–688. The International Federation of Automatic Control, Tokyo, Japan (2013)
Schreiber, V., Savitski, D., Augsburg, K., Ivanov, V., Schyr, Ch.: Advanced braking system control prototyping using networked hardware-in-the-loop technique. In: EuroBrake2016/EB2016-SVM-076, pp. 1–10. The International Federation of Automotive Engineering Societies, TU Automotive 2016, Detroit, Michigan, USA (2016)
Shinde, S.D., Jagdale, J.J., Salunkhe, A.A., Shinde, A.V., Koli, S.R.: Shock absorber test set-up. Int. J. Adv. Eng. Res. Dev. 4(3), 690–698 (2017)
Kothawade, N.S., Halwar, A.D., Chaudhari, A.I., Mahajan, B.R.: Design of shock absorber test rig for measurement and analysis of transmissibility. Int. J. Eng. Res. Technol. 3(1), 2827–2832 (2014)
Nandurdikar, A.S., Naik, A.R., Pachpore, S.S., Manurkar, P.A., Nalawade, V.S.: Design of shock absorber test rig using mechanical exciter to determine transmissibility and natural frequency. Int. J. Res. Publ. Eng. Technol. 3(3), 108–111 (2017)
Reynders, E.: System identification methods for (operational) modal analysis: review and comparison. Arch. Comput. Methods Eng. 19(1), 51–124 (2012)
Žuraulis, V., van der Merwe, N.A., Scholtz, O., Els, P.S.: Modelling and validation of a testing trailer for ABS and tyre interaction on rough terrain. In: 19th International and 14th European-African Regional Conference of the International Society for Terrain-Vehicle Systems (ISTVS), Budapest, Hungary (2017)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Žuraulis, V., Kilikevičius, A. (2020). Quarter Car Test Rig for Extended Dynamics Research in Laboratory Conditions. In: Klomp, M., Bruzelius, F., Nielsen, J., Hillemyr, A. (eds) Advances in Dynamics of Vehicles on Roads and Tracks. IAVSD 2019. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-38077-9_164
Download citation
DOI: https://doi.org/10.1007/978-3-030-38077-9_164
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-38076-2
Online ISBN: 978-3-030-38077-9
eBook Packages: EngineeringEngineering (R0)