Abstract
The results of experimental studies of fine-grained concrete are presented, the formation of the structure and properties of which occurs with the participation of mineral and plasticizing additives. Metakaolin obtained by heat treatment of kaolin at a temperature of 750 °C was used as a mineral reactive aluminosilicate additive, and the water reducing component of concrete was a superplasticizer based on polycarboxylates. It is shown that one of the main factors for improving the physical and mechanical characteristics of concrete is the optimization of the particle size distribution of the fine aggregate and the finely dispersed part of concrete. It has been established that metakaolin plays the role of a multifunctional component in the composition of concrete: a microfiller, a reactive additive with a high pozzolanic effect. The features of hydration processes are shown, and the type of structure-forming phases formed with the participation of metakaolin is established. It is shown that using polycarboxylate and aluminosilicate materials, it is possible to increase the strength and durability of concrete.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Kalashikova, V.I., Moskvinb, R.N., Belyakovac, E.A., Belyakovad, V.S., Petukhove, A.V.: High-dispersity fillers for powder-activated concretes of new generation. Syst. Meth. Technol. 2(22), 118–125 (2014)
Shtark, I., Vikht, B.: The Durability of Concrete (trans. From German.), p. 301. Oranta, Kiev (2004)
Zimakova, G.A., Solonina, V.A., Bajanov, D.S., Iljasova, S.V.: Efficiency of coal fuel ash from the Ekibastuz basin in cement systems. Innov. Investment 4, 327–330 (2019)
Usherov-Marshak, A.V.: Chemical and Mineral Additives in Concrete, p. 281. Color, Kharkov (2005)
Izotov, V.S., Sokolova, Yu.A.: Chemical Additives Concrete Modifications: Monograph, p. 244. KazGASU, Kazan (2006)
Ramachandran, V., Malhotra, V., Jolicouer, C., Spiratos, N.: Superplasticizers: Properties and Applications in Concrete. Canmet, Ottawa (1998). 404 p.
Ohta, A., Sugiyama, T., Tanaka, Y.: Fluidizing mechanism and application of polycarboxylate-based superplasticizers. In: Proceedings Fifth CANMET/ACI International Conference, Rome, Italy, SP 173-19 (1997)
Kaspera, E.A., Bochkareva, O.S.: Research the deformation properties of fine-aggregate composites with use of organic fibers. Syst. Meth. Technol. 1(29), 127–130 (1997)
Kuznetsova, T.V., Nefed’ev, A.P., Kossov, D.Yu.: Kinetics of hydration and properties of cement with metakaolin addition. Constr. Mater. 7, 3–9 (2015)
Mansour, M.S., Abadla, M.T., Jauberthie, R., Messaoudene, I.: Metakaolin as a pozzolan for high performance mortar. Cem. Wapno Beton 2, 102–108 (2012)
Brykov, A.S.: Metakaolin. Cem. Appl. 4, 36–40 (2012)
Lagier, F., Kurtis, K.E.: Influence of Portland cement composition on early age reactions with metakaolin. Cem. Concr. Res. 37, 1411–1417 (2007)
Janotka, I., Puertas, F., Palacios, M., et al.: Metakaolin sand-blended-cement pastes: rheology, hydration process and mechanical properties. Constr. Build. Mater. 24, 791–802 (2010)
Siddique, R., Klaus, J.: Influence of metakaolin on the properties of mortar and concrete. Appl. Clay Sci. 43(3–4), 392–400 (2009)
Krasnobaeva, S.A., Medvedeva, I.N., Brykov, A.S., Stafeyeva, Z.V.: Properties of materials based on Portland cement with MKZHL metakaolin additive. Cem. Appl. 1, 50–55 (2015)
Argynbaev, T.M., Stafeeva, Z.V., Belogub, E.V.: Deposit of kaolins “Zuravliny Log” – complex raw materials for manufacture of building materials. Constr. Mater. 5, 68–71 (2014)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Zimakova, G., Kasper, E., Bochkareva, O. (2020). Strengthening of Concrete Composites Using Polycarboxylate and Aluminosilicate Materials. In: Popovic, Z., Manakov, A., Breskich, V. (eds) VIII International Scientific Siberian Transport Forum. TransSiberia 2019. Advances in Intelligent Systems and Computing, vol 1116. Springer, Cham. https://doi.org/10.1007/978-3-030-37919-3_31
Download citation
DOI: https://doi.org/10.1007/978-3-030-37919-3_31
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-37918-6
Online ISBN: 978-3-030-37919-3
eBook Packages: EngineeringEngineering (R0)