Abstract
The mechanical properties of near β Ti-alloys are highly dependent on their microstructures, which often composed of multiple phases and precipitates. The volume fraction, size, morphology, and distribution of these precipitates can significantly influence the final mechanical properties. Therefore, a complete and detailed understanding on phase transformations and microstructural evolution is crucial to optimize the mechanical properties for various applications. In this study, Ti–5Al–5Mo–5V–3Cr (Ti-5553), a near β titanium alloy has been solution treated at a temperature above the β-transus followed by series of artificial aging treatments at various times and temperatures to study the microstructural evolutions. Different phases were identified, and phase quantity was measured using scanning electron microscope and energy dispersive X-ray spectroscopy. Micro-indentation hardness was measured, and finally, an effort has been taken to correlate the mechanical property with the associated microstructures.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Welk BA (2010) Microstructural and property relationship in titanium alloys Ti-5553, MASc. Thesis, Ohio State University
Shekhar S, Sarkar R, Kar SK, Bhattacharjee A (2015) Effect of solution treatment and aging on microstructure and tensile properties of high strength β titanium alloy Ti–5Al–5Mo–5V–3Cr. Mater Des 66:596–610
Qin D, Li Y, Zhang S, Zhou L (2016) On the tensile embrittlement of lamellar Ti–5Al–5V–5Mo-3Cr alloy. J Alloy Comp 663:581–593
Jones NG, Dashwood RJ, Jackson M, Dye D (2009) Phase decomposition in Ti–5Al–5Mo–5V–3Cr. Acta Mater 57:3830–3839
Jones NG, Dashwood RJ, Dye D, Jackson M (2008) Thermomechanical processing of Ti–5Al–5Mo–5V–3Cr. Mater Sci Eng A 490:369–377
Abbasi SM, Morakkabati M, Sheikhali AH, Momeni A (2014) Hot deformation behavior of beta titanium Ti–13V–11Cr–3Al alloy. Metall Mater Trans A 45:5201–5211
Li C, Zhang XY, Li ZY, Zhou KC (2013) Hot deformation of Ti–5Al–5Mo–5V–3Cr–1Fe near β Titanium alloys containing thin and thick lamellar α phase. Mater Sci Eng A 573:75–83
Cotton JD et al (2007) Phase transformations in Ti–5Al–5Mo–5V–3Cr–0.5Fe, Titanium 2007: Science and Technology, The Japanese Institute of Metals
Abbaschian R (2008) Physical metallurgy principles. Cengage Learning, Stamford
Singh V (2010) Physical Metallurgy. Standard Publishers Distributors, Delhi
Acknowledgements
The authors would like to thank NSERC Canada and MITACS Globalink program for the financial support and VSMPO-Tirus for providing the Ti-5553 alloy.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 The Minerals, Metals & Materials Society
About this paper
Cite this paper
Sahoo, R., Kabir, A.S. (2020). Effect of Heat Treatments on Microstructures and Mechanical Properties of Ti-5553 Alloy. In: TMS 2020 149th Annual Meeting & Exhibition Supplemental Proceedings. The Minerals, Metals & Materials Series. Springer, Cham. https://doi.org/10.1007/978-3-030-36296-6_166
Download citation
DOI: https://doi.org/10.1007/978-3-030-36296-6_166
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-36295-9
Online ISBN: 978-3-030-36296-6
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)