Abstract
This chapter deals with laser-based processes for joining light metals and lightweight structures. At the beginning, a short introduction concerning the tool laser beam is given. A subsequent focus will be on laser welding of aluminum, in particular deep penetration laser welding (keyhole welding). A section addresses the specific challenges of this process and the current solution approaches from research and development. Hereby, the increase in the gap bridging ability, the increase in the seam surface quality, the reduction in the susceptibility to hot cracking, the prevention of spatters and pores, and the increase in process reliability are highlighted. Especially, the laser welding of thin sheets up to thicknesses of a few millimeters is covered. Alongside the joining of aluminum alloys, the joining of dissimilar materials in particular plays a key role in aircraft construction in order to transfer the advantages of a targeted eco- and cost-efficient material mix into an efficient multi-material design of lightweight structures. A further subchapter is therefore dedicated to laser-based joining of aluminum and titanium components by deep penetration as well as heat conduction laser processes. The focus here is on the process technology approaches and the strength of the joints achieved. An outlook into the future is given by the consideration of aluminum-titanium-carbon fiber-reinforced plastic (CFRP) transition structures. However, laser irradiation has a high potential not only as a direct joining tool but also for preprocessing or post processing or as a supplementary process. Therefore, laser-based adhesive surface pretreatment processes as well as the production of novel hybrid laminar flow control (HLFC) structures based on the combination of several laser machining processes as an aerodynamic approach to reduce the kerosene consumption are demonstrated.
Keywords
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Aalderink BJ, Pathiraj B (2010) Seam gap bridging of laser based processes for the welding of aluminium sheets for industrial applications. Int J Adv Manuf Technol 48:143–154. https://doi.org/10.1007/s00170-009-2270-x
Abbas A, de Vicente J, Valero E (2013) Aerodynamic technologies to improve aircraft performance. Aerosp Sci Technol 28(1):100–132. https://doi.org/10.1016/j.ast.2012.10.008
Allison A, Scudamore R (2014) European Strategic Research Agenda: Joining (prepared by the Joining Sub-Platform)
Arata Y, Miyamoto I (1974) Some fundamental properties of high power laser beam as a heat source. Trans JWRI 3:1–20
Arata Y, Matsuda F, Mukae S et al (1973) Effect of weld solidification mode on tensile properties of aluminum weld metal. Trans JWRI 2(2):184–190
Bang H, Bang H, Song H et al (2013) Joint properties of dissimilar Al6061-T6 aluminum alloy/Ti–6%Al–4%V titanium alloy by gas tungsten arc welding assisted hybrid friction stir welding. Mater Des 51(0):544–551. https://doi.org/10.1016/j.matdes.2013.04.057
Bautze T (2018) Seam tracking with OCT and beam oscillation for automotive laser remote welding applications. In: European automotive laser applications (EALA)
Beck M (1996) Modellierung des Lasertiefschweißens. B. G. Teubner, Stuttgart
Bergmann JP (2004) Laserstrahlschweißen von Titanwerkstoffen unter Berücksichtigung des Einflusses des Sauerstoffes. Mat.-wiss. u. Werkstofftech. 35(9):543–556. https://doi.org/10.1002/mawe.200400776
Bergmann JP, Bielenin M, Stambke M et al (2013) Effects of diode laser superposition on pulsed laser welding of aluminum. Lasers Manuf (LiM) (41):180–189. https://doi.org/10.1016/j.phpro.2013.03.068
Bergmann JP, Bielenin M, Feustel T (2015) Aluminum welding by combining a diode laser with a pulsed Nd: YAG laser. Weld World 59(2):307–315. https://doi.org/10.1007/s40194-014-0218-8
Berkmanns J, Behler K, Beyer E (1992) Der Laser—ein neues Werkzeug zum Schweißen von Aluminiumwerkstoffen. In: Proceedings of 4th European conference on laser treatment of materials ECLAT ’92, Oberursel, pp 151–156
Brock J, Aidun D (1995) The effect of titanium and boron on GMAW weldments. In: Proceedings of the 6th international conference on aluminum weldments, pp 343–356
Cahoon JR, Tandon KN, Chaturvedi MC (1992) Effect of gravity level on grain refinement in aluminum alloys. Metall Trans A 23:3399–3404
Cao X, Wallace W, Immarigeon J-P et al (2003) Research and progress in laser welding of wrought aluminum alloys. II. Metallurgical microstructures, defects, and mechanical properties. Mater Manuf Process 18(1):23–49. https://doi.org/10.1081/AMP-120017587
Casalino G, Mortello M (2016) Modeling and experimental analysis of fiber laser offset welding of Al-Ti butt joints. Int J Adv Manuf Technol 83:89–98. https://doi.org/10.1007/s00170-015-7562-8
Casalino G, Mortello M, Peyre P (2015) Yb–YAG laser offset welding of AA5754 and T40 butt joint. J Mater Process Technol 223:139–149. https://doi.org/10.1016/j.jmatprotec.2015.04.003
Chen W, Molian P (2007) Dual-beam laser welding of ultra-thin AA 5052-H19 aluminum. Int J Adv Manuf Technol 39:889–897. https://doi.org/10.1007/s00170-007-1278-3
Chen Y, Chen S, Li L (2009) Effects of heat input on microstructure and mechanical property of Al/Ti joints by rectangular spot laser welding-brazing method. Int J Adv Manuf Technol 44(3–4):265–272. https://doi.org/10.1007/s00170-008-1837-2
Chen S, Li L, Chen Y et al (2010) Si diffusion behavior during laser welding-brazing of Al alloy and Ti alloy with Al-12Si filler wire. Trans Nonferrous Metals Soc China 20(1):64–70. https://doi.org/10.1016/S1003-6326(09)60098-4
Cho W-I, Schultz V, Woizeschke P (2018a) Numerical study of the effect of the oscillation frequency in buttonhole welding. J Mater Process Technol 261:202–212. https://doi.org/10.1016/j.jmatprotec.2018.05.024
Cho W-I, Woizeschke P, Schultz V (2018b) Simulation of molten pool dynamics and stability analysis in laser buttonhole welding. Procedia CIRP 74:687–690. https://doi.org/10.1016/j.procir.2018.08.042
Cross CE (2005) On the origin of weld solidification cracking. In: Böllinghaus T, Herold H (eds) Hot cracking phenomena in welds. Springer, Berlin, pp 3–18
Dausinger F (1995) Strahlwerkzeug Laser: Energiekopplung und Prozesseffektivität. Zugl.: Stuttgart, Univ., Habil.-Schr. Laser in der Materialbearbeitung. Teubner, Stuttgart
Dev S, Stuart AA, Kumaar RRD et al (2007) Effect of scandium additions on microstructure and mechanical properties of Al–Zn–Mg alloy welds. Mater Sci Eng A 467(1–2):132–138. https://doi.org/10.1016/j.msea.2007.02.080
Dilthey U (2005) Schweißtechnische Fertigungsverfahren 2: Verhalten der Werkstoffe beim Schweißen, 3., bearbeitete Auflage. VDI-Buch. Springer, Berlin
Dilthey U (2006) Schweißtechnische Fertigungsverfahren 1: Schweiß- und Schneidtechnologien, 3., bearbeitete Auflage. VDI-Buch. Springer, Berlin
Dressler U, Biallas G, Alfaro Mercado U (2009) Friction stir welding of titanium alloy TiAl6V4 to aluminium alloy AA2024-T3. Mater Sci Eng A 526(1–2):113–117. https://doi.org/10.1016/j.msea.2009.07.006
Farrel WJ, Ferrario JD (1987) A computer-controlled, wide-bandwidth deflection system for electron beam welding and heat treating. Weld J 10:41–49
Fetzer F, Hagenlocher C, Weber R (2018) High power, high speed, high quality. LTJ 15(3):28–31. https://doi.org/10.1002/latj.201800017
Fonseca de Arruda AC, Prates de Campos Filho M (1983) Rheocasting techniques applied to grain refinement of aluminum alloys. In: Proceedings of the conference on solidification technology in the foundry and cast house, Coventry (UK), pp 143–146
Fuji A, Ameyama K, North TH (1995) Influence of silicon in aluminium on the mechanical properties of titanium/aluminium friction joints. J Mater Sci 30
Gao M, Chen C, Gu Y et al (2014) Microstructure and tensile behavior of laser arc hybrid welded dissimilar Al and Ti alloys. Materials 7(3):1590–1602. https://doi.org/10.3390/ma7031590
Gatzen M (2014) Durchmischung beim Laserstrahltiefschweißen unter dem Einfluss niederfrequenter Magnetfelder. Dissertation. Strahltechnik, Bd. 55. BIAS Verlag, Bremen
Geisel M (2002) Prozeßkontrolle und -steuerung beim Laserstrahlschweißen mit den Methoden der nichtlinearen Dynamik. Meisenbach Bamberg
Göbel G, Brenner B, Beyer E (2007) New application possibilities for fiber laser welding. In: Lu Y (ed) 26th International congress on applications of lasers & electro-optics (ICALEO 2007), Orlando, pp 102–108
Gref W (2005) Laserstrahlschweißen von Aluminiumwerkstoffen mit der Fokusmatrixtechnik. Laser in der Materialbearbeitung. Utz, München
Gruss H (2008) Schweißgerechte Struktur- und Prozessstrategien im Flugzeugbau. Dissertation
Gruss H, Herold H, Streitenberger M (2008) Verbesserung des Strukturverhaltens laserstrahlgeschweißter Haut-Stringer-Verbindungen. In: 6. Laser-Anwenderforum Bremen, BIAS-Verlag
Habenicht G (2009) Kleben: Grundlagen, Technologien, Anwendungen, 6., aktualisierte Aufl. VDI. Springer, Berlin
Haboudou A, Peyre P, Vannes AB et al (2003) Reduction of porosity content generated during Nd:YAG laser welding of A356 and AA5083 aluminium alloys. Mater Sci Eng A 363(1):40–52. https://doi.org/10.1016/S0921-5093(03)00637-3
He X, Zhang Y, Xing B et al (2015) Mechanical properties of extensible die clinched joints in titanium sheet materials. Mater Des 71:26–35. https://doi.org/10.1016/j.matdes.2015.01.005
Heider P (1994) Lasergerechte Konstruktion und lasergerechte Fertigungsmittel zum Schweissen grossformatiger Aluminium-Strukturbauteile, Als Ms. gedr. Fortschrittberichte VDI : Reihe 2, Fertigungstechnik, Nr. 326. VDI-Verl., Düsseldorf
Heimerdinger C (2003) Laserstrahlschweißen von Aluminiumlegierungen für die Luftfahrt. Zugl.: Stuttgart, Univ., Diss., 2003. Laser in der Materialbearbeitung. Utz, München
Herrmann A, Schiebel P, Hoffmeister C et al (2008) Verbindungen zwischen einem monolithischen Metallbauteil und einem endlosfaserverstärkten Laminatbauteil sowie Verfahren zur Herstellung derselben (DE102008047333B4)
Heß A, Bassi C, Schellinger F (2011) Heißrissfreies Remotelaserstrahlfügen von 6xxxer Aluminiumwerkstoffen. Laser Mgazin 2:30–31
Hilbinger RM (2001) Heißrissbildung beim Schweißen von Aluminium in Blechrandlage. Zugl.: Bayreuth, Univ., Diss., 2001. Institut für Materialforschung—Bayreuth, vol 9. Utz Wiss, München
Hohenberger B (2003) Laserstrahlschweissen mit Nd:Yag-Doppelfokustechnik: Steigerung von Prozeßstabilität, Flexibilität und verfügbarer Strahlleistung. Zugl.: Stuttgart, Univ., Diss., 2002. Laser in der Materialbearbeitung. Utz, München
Janaki Ram GD, Mitra TK, Shankar V et al (2003) Microstructural refinement through inoculation of type 7020 Al–Zn–Mg alloy welds and its effect on hot cracking and tensile properties. J Mater Process Technol 142(1):174–181. https://doi.org/10.1016/S0924-0136(03)00574-0
Jin X, Li L (2004) An experimental study on the keyhole shapes in laser deep penetration welding. Opt Lasers Eng 41(5):779–790. https://doi.org/10.1016/S0143-8166(03)00034-4
Jones L, Alfile J-P, Aubert P et al (2000) Advanced cutting, welding and inspection methods for vacuum vessel assembly and maintenance. Fusion Eng Des 51–52:985–991. https://doi.org/10.1016/S0920-3796(00)00412-9
Kahraman N, Gulenc B, Findik F (2007) Corrosion and mechanical-microstructural aspects of dissimilar joints of Ti-6Al-4V and Al plates. Int J Impact Eng 34(8):1423–1432. https://doi.org/10.1016/j.ijimpeng.2006.08.003
Kaplan AFH, Powell J (2011) Spatter in laser welding. J Laser Appl 23(3):32005. https://doi.org/10.2351/1.3597830
Kappelsberger E (1987) Werkstückspezifische Bedingungen beim Laserschweißen: Laser/Optoelektronik in der Technik/Laser/Optoelectronics in Engineering
Katayama S (2013) The unweldables. Laser Community 2:24–25
Katayama S, Kawahito Y (2009) Elucidation of phenomena in high-power fiber laser welding and development of prevention procedures of welding defects. In: Gapontsev DV, Kliner DA, Dawson JW et al (eds) SPIE LASE: lasers and applications in science and engineering. SPIE, 71951R
Katayama S, Seto N, Kim JD et al (1997) Formation mechanism and reduction method of porosity in laser welding of stainless steel. In: Proceedings of the 16th international congress on applications of lasers and electro-optics (ICALEO), pp 83–92
Katayama S, Kawahito Y, Mizutani M (2012) Latest progress in performance and understanding of laser welding. Phys Procedia 39:8–16. https://doi.org/10.1016/j.phpro.2012.10.008
Katayama S, Mizutani M, Kawahito Y et al (2015) Fundamental research of 100 kW fiber laser welding technology. In: Proceedings of the lasers in manufacturing conference (LiM), #342
Kempa S (2014) Potentiale und Grenzen beim thermischen Fügen von Multimaterial-Verbindungen. Schweißtechnik Soudure 2014(1):36–39
Klassen M (2000) Prozeßdynamik und resultierende Prozeßinstabilitäten beim Laserstrahlschweißen von Aluminium. Dissertation, Universiät Bremen
Kocik R (2009) Analyse und Bewertung der mechanisch-technologischen Eigenschaften von geschweissten Mischverbindungen aus Aluminium und Titan. Forschungsberichte aus der Stiftung Institut für Werkstofftechnik, Bremen, Bd. 46. Shaker, Aachen
Kocik R, Vugrin T, Seefeld T (2006) Laserstrahlschweißen im Flugzeugbau: Stand und künftige Anwendungen. In: 5. Laser-Anwenderforum Bremen, BIAS-Verlag
Kogel-Hollacher M, Schoenleber M, Bautze T et al (2016) Measurement and closed-loop control of the penetration depth in laser materials processing. In: 9th international conference on photonic technologies (LANE)
Kou S (1987) Welding metallurgy. A Wiley Interscience publication, Wiley, New York
Kreimeyer M, Vollertsen F (2005) Processing titanium-aluminum hybrid joints for aircraft applications. In: Proceedings of the third international WLT-conference on lasers in manufacturing 2005, LiM2005, Munich
Kreimeyer M, Wagner F, Zerner I et al (2001) Laser beam joining of aluminium with titanium with the use of an adapted working head. In: DVS-Berichte, vol 212. Verlag für Schweißen und verwandte Verfahren, DVS-Verlag, pp 317–321
Kreimeyer M, Wagner F, Vollertsen F (2005) Laser processing of aluminum-titanium-tailored blanks. Opt Lasers Eng 43(9):1021–1035. https://doi.org/10.1016/j.optlaseng.2004.07.005
Kutsuna M, Shido K, Okada T (2002) Fan shaped cracking test of aluminum alloys in laser welding. In: Miyamoto I, Kobayashi KF, Sugioka K et al (eds) LAMP 2002: international congress on laser advanced materials processing. SPIE, p 230
Lin R, Wang H-P, Lu F et al (2017) Numerical study of keyhole dynamics and keyhole-induced porosity formation in remote laser welding of Al alloys. Int J Heat Mass Transf 108:244–256. https://doi.org/10.1016/j.ijheatmasstransfer.2016.12.019
Liu W, Tian X, Zhang X (1996) Preventing weld hot cracking by synchronous rolling during welding. Weld J 75(9):297.s–304.s
Ma Z, Zhao W, Yan J et al (2011) Interfacial reaction of intermetallic compounds of ultrasonic-assisted brazed joints between dissimilar alloys of Ti6Al4V and Al4Cu1Mg. Ultrason Sonochem 18(5):1062–1067. https://doi.org/10.1016/j.ultsonch.2011.03.025
Maina MR, Okamoto Y, Okada A et al (2018) High surface quality welding of aluminum using adjustable ring-mode fiber laser. J Mater Process Technol 258:180–188. https://doi.org/10.1016/j.jmatprotec.2018.03.030
Majumdar B, Galun R, Weisheit A et al (1997) Formation of a crack-free joint between Ti alloy and Al alloy by using a high-power CO2 laser. J Mater Sci 32:6191–6200
Martin B, Loredo A, Pilloz M et al (2001) Characterisation of cw Nd: YAG laser keyhole dynamics. Opt Laser Technol 33(4):201–207. https://doi.org/10.1016/S0030-3992(01)00014-7
Martinsen K, Hu SJ, Carlson BE (2015) Joining of dissimilar materials. CIRP Ann Manuf Technol 64(2):679–699. https://doi.org/10.1016/j.cirp.2015.05.006
Marya M, Marya S, Priem D (2005) On the characteristics of electromagnetic welds between aluminium and other metals and alloys. Weld World 49(5/6):74–84
Mathers G (2002) The welding of aluminium and its alloys. CRC Press, Boca Raton
Matsuda F, Nakata K, Nishio Y et al (1986) Effect of zirconium addition on improvement of solidification crack susceptibility of Al-Zn-Mg alloy weld—fundamental research on solidification crack susceptibility of Al-Zn-Mg alloy weld (Report 1). Q J Jpn Weld Soc 4(1):115–120. https://doi.org/10.2207/qjjws.4.115
Matsunawa A, Seto N, Kim J-D et al (eds) (2000) Dynamics of keyhole and molten pool in high-power CO2 laser welding, 3888 IS
McCartney DG (1989) Grain refining of aluminium and its alloys using inoculants. Int Mater Rev 34(1):247–260. https://doi.org/10.1179/imr.1989.34.1.247
Messaoudia H, Mehrafsun S, Schrauf G et al (2015) Highly reproducible laser micro drilling of titanium-based HLFC sections. In: Lasers in manufacturing, Munich, Germany
Miriyev A, Levy A, Kalabukhov S et al (2016) Interface evolution and shear strength of Al/Ti bi-metals processed by a spark plasma sintering (SPS) apparatus. J Alloys Compd 678:329–336. https://doi.org/10.1016/j.jallcom.2016.03.137
Mittelstädt C, Seefeld T, Woizeschke P et al (2018) Laser welding of hidden T-joints with lateral beam oscillation. Procedia CIRP 74:456–460. https://doi.org/10.1016/j.procir.2018.08.151
Miyamoto (1997) Laser welding (2)—welding of thick plate. In: Proceedings of the 41st laser materials processing conference, pp 21–34
Möller F, Thomy C, Vollertsen F et al (2010) Novel method for joining CFRP to aluminium. In: Laser assisted net shape engineering 6, Proceedings of the LANE 2010, Part 2 5, pp 37–45. https://doi.org/10.1016/j.phpro.2010.08.027
Möller F, Thomy C, Vollertsen F (2012) Joining of titanium-aluminium seat tracks for aircraft applications—system technology and joint properties. Weld World 56(3–4):108–114. https://doi.org/10.1007/BF03321341
Nakashiba S, Okamoto Y, Sakagawa T et al (2011) Welding characteristics of aluminum alloy by pulsed Nd:YAG laser with pre- and post-irradiation of superposed continuous diode laser. In: Proceedings of international congress on applications of lasers and electro optics (ICALEO), #M205
Nesterov AF, Trubitsin AP, Prokhorov AN (1990) Special features of resistance welding titanium to aluminium. Weld Int 4(6):464–466. https://doi.org/10.1080/09507119009447761
Ono M, Shiozaki T, Shinbo Y et al (2001) Development of high power laser pipe welding process. Q J Jpn Weld Soc 19(2):233–240. https://doi.org/10.2207/qjjws.19.233
Ostermann F (1998) Anwendungstechnologie Aluminium. VDI-Buch. Springer, Berlin
Palm F (2000) Bericht aus der Werkstoff-Forschung der DaimlerChryslerAG in Ottobrunn zum Schweißen im Flugzeugbau. In: DVS-Berichte, vol 208. DVS-Media, pp 53–58
Ploshikhin V, Prikhodovsky A, Makhutin M et al (2004) Rechnergestützte Entwicklung der Verfahren zum rissfreien Laserstrahlschweißen. NMB Bayreuth
Ploshikhin V, Prikhodovski A, Ilin A et al (2007) Computer aided development of the crack-free laser welding processes. Key Eng Mat 353–358:1984–1994. https://doi.org/10.4028/www.scientific.net/KEM.353-358.1984
Pretorius T, Kreimeyer M, Sepold G et al (2004) Simulation of laser beam welded aluminium joints. In: Proceedings of 14th international conference on computer technology in welding and manufacturing
Radaj D (1992) Heat effects of welding: temperature field, residual stress, distortion. Springer, Berlin
Radel T (2018) Mechanical manipulation of solidification during laser beam welding of aluminum. Weld World 62(1):29–38. https://doi.org/10.1007/s40194-017-0530-1
Radel T, Woizeschke P (2018) Reduction of hot cracking susceptibility during laser welding of aluminum by vibrations. Weld World 41(1):164. https://doi.org/10.1007/s40194-018-00680-2
Radscheit CR (1997) Laserstrahlfügen von Aluminium mit Stahl. Dissertation. Strahltechnik, Bd. 4. BIAS-Verlag, Bremen
Reitemeyer D (2012) Stabilisierung der Fokuslage beim Schweißen mit Faser- und Scheibenlasern. Zugl.: Bremen, Univ., Dissertation. Strahltechnik, Bd. 49. BIAS-Verlag, Bremen
Reitemeyer D, Seefeld T, Vollertsen F et al (2009) Influences on the laser induced focus shift in high power fiber laser welding. Lasers Manuf (LiM):293–298
Reitemeyer D, Seefeld T, Vollertsen F (2010) Online focus shift measurement in high power fiber laser welding. Phys Procedia 5:455–463. https://doi.org/10.1016/j.phpro.2010.08.073
Reitemeyer D, Schultz V, Syassen F et al (2013) Laser welding of large scale stainless steel aircraft structures. Lasers Manuf (LiM) 41:106–111. https://doi.org/10.1016/j.phpro.2013.03.057
Reitz V, Meinhard D, Ruck S et al (2017) A comparison of IR- and UV-laser pretreatment to increase the bonding strength of adhesively joined aluminum/CFRP components. Compos A Appl Sci Manuf 96:18–27. https://doi.org/10.1016/j.compositesa.2017.02.014
Russell JD (1997) Application of laser welding in shipyards. In: Beckmann LHJF (ed) Lasers and optics in manufacturing III. SPIE, pp 174–183
Scaggs M, Haas G (2010). Thermal lensing compensation objective for high power lasers. International Congress on Applications of Lasers & Electro-Optics (ICALEO2010), pp 1511–1517. https://doi.org/10.2351/1.5062011
Schempp P, Cross CE, Schwenk C et al (2012) Influence of Ti and B additions on grain size and weldability of aluminium alloy 6082. Weld World 56(9):95–104. https://doi.org/10.1007/BF03321385
Schempp P, Cross CE, Häcker R et al (2013) Influence of grain size on mechanical properties of aluminium GTA weld metal. Weld World 57(3):293–304. https://doi.org/10.1007/s40194-013-0026-6
Schneider A, Avilov V, Gumenyuk A et al (2013) Laser beam welding of aluminum alloys under the influence of an electromagnetic field. Lasers Manuf (LiM) (41):4–11. https://doi.org/10.1016/j.phpro.2013.03.045
Schoer H (1980) Über das Schweißrissigkeitsverhalten von Aluminiumwerkstoffen. Metall 34(6):546–551
Schrauf G (2005) Status and perspectives of laminar flow. Aeronaut J 109(1102):639–644. https://doi.org/10.1017/S000192400000097X
Schubert E, Zerner I, Sepold G et al (1997) Laser beam joining of material combinations for automotive applications. In: Beckmann LHJF (ed) Lasers and optics in manufacturing III. SPIE, pp 212–221
Schubert E, Klassen M, Skupin J et al (1998) Effect of filler wire on process stability in laser beam welding of aluminium-alloys. In: Proceedings of the 6th international conference on welding and melting by electron and laser beams (CISFFEL), pp 195–204
Schultz V, Seefeld T (2015) Schlussbericht - Strahlmodulation beim Schweißen mit hoch fokussierenden Festkörperlasern mit Zusatzwerkstoff (Spaltüberbrückbarkeit), IGF-Vorhaben 17.558N
Schultz V, Woizeschke P (2018) High seam surface quality in keyhole laser welding: buttonhole welding. J Manuf Mater Process (JMMP) 2(4):78. https://doi.org/10.3390/jmmp2040078
Schultz V, Seefeld T, Vollertsen F (2014a) Gap bridging ability in laser beam welding of thin aluminum sheets. Phys Procedia 56:545–553. https://doi.org/10.1016/j.phpro.2014.08.037. 8th International conference on laser assisted net shape engineering LANE 2014
Schultz V, Thomy C, Vollertsen F et al (2014b) Development of a laser welding and straightening process for aircraft structures for hybrid laminar flow control. In: IIW annual assembly: Doc. no. IV-1180-14
Schultz V, Cho W-I, Woizeschke P et al (2017a) Laser deep penetration weld seams with high surface quality. In: Overmeyer L, Reisgen U, Ostendorf A, Schmidt M (eds) Lasers in manufacturing (LiM2017). USB stick
Schultz V, Stephen A, Kalms M et al (2017b) Laser ermöglichen die Fertigung kraftstoffsparender Flugzeugstrukturen. Laser Magazin 5:23–24
Schulze G (2010) Die Metallurgie des Schweissens: Eisenwerkstoffe—nichteisenmetallische Werkstoffe, 4., neu bearbeitete Aufl. VDI-Buch. Springer, Heidelberg
Schumacher J (2002) Erfahrungen bei der Serieneinführung für Laserstrahlschweißen im Flugzeugbau. In: 4. Laser-Anwenderforum. BIAS Verlag, Bremen, pp 247–256
Schumacher J, Irretier A, Kocik R et al (2007) Investigation of laser-beam joined titanium-aluminum hybrid structures. In: Applied production technology APT’07, pp 149–160
Schumacher J, Clausen B, Zoch H-W (2014) Strength and failure behaviour of carbon fibre reinforced plastics (CFRP)-aluminium seam structures. Mat.-wiss. u. Werkstofftech 45(12):1108–1115. https://doi.org/10.1002/mawe.201400359
Semiatin SL, Seetharaman V, Weiss I (1998) Hot workability of titanium and titanium aluminide alloys—an overview. Mater Sci Eng A 243(1-2):1–24. https://doi.org/10.1016/S0921-5093(97)00776-4
Seto N, Katayama S, Matsunawa A (2001) Porosity formation mechanism and suppression procedure in laser welding of aluminium alloys. Weld Int 15(3):191–202. https://doi.org/10.1080/09507110109549341
Shi P, Wan P (2016) Numerical simulation of formation process of keyhole-induced pore for laser deep penetration welding. In: International conference on advanced electronic science and technology (AEST), pp 368–373
Skoda P, Dujak J, Michalicka P (op. 1996) Creation of heterogeneous weld joints of titanium- and aluminium-based materials by electron beam welding. In: Welding science & technology: Japan—Slovak welding symposium: proceedings of the international welding conference, 5–7 March 1996. Faculty of Metallurgy, Department of Materials Science, Košice, pp 157–160
Song Z, Nakata K, Wu A et al (2013) Interfacial microstructure and mechanical property of Ti6Al4V/A6061 dissimilar joint by direct laser brazing without filler metal and groove. Mater Sci Eng A 560(0):111–120. https://doi.org/10.1016/j.msea.2012.09.044
Specht U (2015) Untersuchungen zur Entstehung laserinduzierter nanoporöser Strukturen auf Titanoberflächen für langzeitstabile Klebungen. Dissertation. University of Bremen
Specht U, Ihde J, Mayer B (2014) Laser induced nano-porous Ti–O-layers for durable titanium adhesive bonding. Mat.-wiss. u. Werkstofftech 45(12):1116–1122. https://doi.org/10.1002/mawe.201400360
Sun Z, Kuo M (1999) Bridging the joint gap with wire feed laser welding. J Mater Process Technol 87(1):213–222. https://doi.org/10.1016/S0924-0136(98)00346-X
Takemoto T, Nakamura H, Okamoto I (1990) Aluminum brazing filler metals for making aluminum to titanium joints in a vacuum (physics, process, instrument & measurement). Trans JWRI 19(1):39–44
Tang Z (2014) Heißrissvermeidung beim Schweißen von Aluminiumlegierungen mit einem Scheibenlaser. Dissertation. Strahltechnik, Bd. 53. BIAS Verlag
Tang Z, Vollertsen F (2014) Influence of grain refinement on hot cracking in laser welding of aluminum. Weld World 58(3):355–366. https://doi.org/10.1007/s40194-014-0121-3
Thomy C, Vollertsen F (2007) Hybrid Welding of thin sheet material with single-mode fibre laser. In: Proceedings of the IIW International Institute of Welding Commission XII intermediate meeting, IIW Doc. Nr. XII-1912-07 (CD)
Tomashchuk I, Sallamand P, Cicala E et al (2015) Direct keyhole laser welding of aluminum alloy AA5754 to titanium alloy Ti6Al4V. J Mater Process Technol 217:96–104. https://doi.org/10.1016/j.jmatprotec.2014.10.025
Tsukamoto S, Kawaguchi I, Honda H et al (2001) Suppression of porosity using pulse modulation of laser power in 20kW laser welding. In: Proceedings of the 20th international congress on applications of lasers and electro-optics (ICALEO), pp D607–D615
Vollertsen F (2009) Properties and prospects of high brightness solid state lasers. LTJ 6(5):27–31. https://doi.org/10.1002/latj.200990071
Vollertsen F, Neumann S (2009) High brightness solid state laser: development and application. In: Proceedings of the 5th international congress on laser advanced material processing LAMP09, #317
Vollertsen F, Woizeschke P, Schultz V et al (2017) Developments for laser joining with high-quality seam surfaces. Lightw Des Worldw 10(5):6–13. https://doi.org/10.1007/s41777-017-0041-1
Volpp J (2017) Dynamik und Stabilität der Dampfkapillare beim Laserstrahltiefschweißen. Dissertation. Strahltechnik, Bd. 63. BIAS Verlag
Volpp J, Srowig J, Vollertsen F (2016) Spatters during laser deep penetration welding with a bifocal optic. AMR 1140:123–129. https://doi.org/10.4028/www.scientific.net/AMR.1140.123
Wang H, Vivek A, Wang Y et al (2016) Laser impact welding application in joining aluminum to titanium. J Laser Appl 28(3):32002. https://doi.org/10.2351/1.4946887
Wilden J, Bergmann JP (2004) Manufacturing of titanium/aluminium and titanium/steel joints by means of diffusion welding. Weld Cut 3:285–290
Wilden J, Neumann T (2010) Moderne Strahlquellen im Einsatz – Welche metallurgischen Ansätze ergeben sich? In: Strahlschweißen von Aluminium. DVS-Media, Düsseldorf, pp 39–44
Wilden J, Bergmann JP, Reich S et al (2007a) Grundlegende Untersuchungen zum flussmittelfreien Löten von Leichtmetall-Material-Mix Konstruktionen
Wilden J, Bergmann JP, Holtz R et al (2007b) Einsatz von gepulsten Nd:YAG-Lasern für das Fügen von Werkstoffen und Werkstoffkombinationen mit anspruchsvollen Eigenschaften
Woizeschke P (2017) Eigenschaften laserstrahlgefügter Mischverbindungen aus Aluminium und Titan in Abhängigkeit der Kantengeometrie und Halbzeugstruktur. Dissertation, University of Bremen, Strahltechnik, Bd. 65, Bremen, urn:nbn:de:gbv:46-00106005-12
Woizeschke P, Vollertsen F (2014) Distortion effects in deep penetration laser micro welding: challenges and results. Lasers Eng 28(5-6):337–359
Woizeschke P, Vollertsen F (2015) Fracture analysis of competing failure modes of aluminum-CFRP joints using three-layer titanium laminates as transition. J Mater Eng Perform 24(9):3558–3572. https://doi.org/10.1007/s11665-015-1638-3
Woizeschke P, Vollertsen F (2016) A strength-model for laser joined hybrid aluminum–titanium transition structures. CIRP Ann Manuf Technol 65(1):241–244. https://doi.org/10.1016/j.cirp.2016.04.027
Woizeschke P, Vollertsen F (2018) Joining of aluminum to titanium sheets/ laminates for aluminum-CFRP transitions. In: Herrmann AS (ed) Outcome of the research unit FOR1224: CFRP-Al transition structures in lightweight constructions: “Schwarz-Silber”. BoD, Norderstedt, pp 31–76
Woizeschke P, Wottschel V (2013) Recent developments for laser beam joining of CFRP-aluminum structures. materials science engineering, symposium B6—hybrid structures. Procedia Mater Sci 2:250–258. https://doi.org/10.1016/j.mspro.2013.02.031
Woizeschke P, Mosgowoi E, Vollertsen F (2015) Decreasing pore formation in multiple-sheet laser joining with interfacial polymeric contaminations. Weld World 59(5):683–692. https://doi.org/10.1007/s40194-015-0244-1
Woizeschke P, Kügler H, Vollertsen F (2016a) Bewerten und Vergleichen der Spaltüberbrückbarkeit unterschiedlicher thermischer Fügeverfahren—Der Benchmark-Spalt. Der Praktiker 8:356–358
Woizeschke P, Schultz V, Messaoudia H et al (2016b) Laser processing of lightweight aircraft structures. (Keynote). In: Proceedings of the 84th laser materials processing conference, Japan Laser Processing Society (JLPS), pp 21–26
Woizeschke P, Radel T, Nicolay P et al (2017) Laser deep penetration welding of an aluminum alloy with simultaneously applied vibrations. Lasers Manuf Mater Process 4(1):1–12. https://doi.org/10.1007/s40516-016-0032-9
Xie J (2002) Dual beam laser welding. Weld J 81(10):223–230
Yamaguchi M, Umakoshi Y, Yamane T (1987) Plastic deformation of the intermetallic compound Al3Ti. Philos Mag A 55(3):301–315. https://doi.org/10.1080/01418618708209869
Yamaguchi M, Inui H, Ito K (2000) High-temperature structural intermetallics. Acta Mater 48(1):307–322. https://doi.org/10.1016/S1359-6454(99)00301-8
Yang YP, Dong P, Zhang J et al (2000) A hot-cracking mitigation technique for welding high-strength aluminum alloy. Weld Res Suppl 9:17
Young TM, Humphreys B, Fielding JP (2001) Investigation of hybrid laminar flow control (HLFC) surfaces. Aircr Des 4(2–3):127–146. https://doi.org/10.1016/S1369-8869(01)00010-6
Zerner I (2003) Sitzschiene(DE10360807B4). Accessed 18 Oct 2016
Zhang J, Weckman DC, Zhou Y (2008) Effects of temporal pulse shaping on cracking susceptibility of 6061-T6 aluminum Nd:YAG laser welds. Weld Res 87:18–30
Zhang X, He X, Xing B et al (2016) Influence of heat treatment on fatigue performances for self-piercing riveting similar and dissimilar titanium, aluminium and copper alloys. Mater Des 97:108–117. https://doi.org/10.1016/j.matdes.2016.02.075
Zhao H, DebRoy T (2003) Macroporosity free aluminum alloy weldments through numerical simulation of keyhole mode laser welding. J Appl Phys 93(12):10089–10096. https://doi.org/10.1063/1.1573732
Zhu Z, Lee K, Wang X (2012) Ultrasonic welding of dissimilar metals, AA6061 and Ti6Al4V. Int J Adv Manuf Technol 59(5–8):569–574. https://doi.org/10.1007/s00170-011-3534-9
Zimmermann S, Specht U, Spieß L et al (2012) Improved adhesion at titanium surfaces via laser-induced surface oxidation and roughening. Mater Sci Eng A 558(0):755–760. https://doi.org/10.1016/j.msea.2012.08.101
Acknowledgments
The author would like to thank his current and former colleagues at the BIAS Institute in Bremen for their many years of cooperation and various support.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this chapter
Cite this chapter
Woizeschke, P. (2020). Laser Joining Processes for Lightweight Aircraft Structures. In: Pantelakis, S., Tserpes, K. (eds) Revolutionizing Aircraft Materials and Processes. Springer, Cham. https://doi.org/10.1007/978-3-030-35346-9_11
Download citation
DOI: https://doi.org/10.1007/978-3-030-35346-9_11
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-35345-2
Online ISBN: 978-3-030-35346-9
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)