Abstract
Deep drawing process is commonly used to produce particular components like aerospace and automotive structural parts. Based on the drawing ratio, it can be performed in a single or a multiple-stage drawing. Due the complexity of this process, finite element simulations are considered as a powerful tool for the both reasons: reducing times and costs, and improving quality and productivity. The current study is conducted to evaluate the performance and the capability of a non associated flow rule (NAFR) approach on numerical results during reverse re-drawing process of DDQ mild steel metal. The adopted model is implemented on ABAQUS software using user interface material subroutine (VUMAT).
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Autay R, Koubaa S, Wali M, Dammak F (2017) Numerical implementation of coupled anisotropic plasticity-ductile damage in sheet metal forming process. J Mech 34(04):417–430
Ben Said L, Mars J, Wali M, Dammak F (2016) Effects of the tool path strategies on incremental sheet metal forming process. Mech Ind 17(4):411
Ben Said L, Mars J, Wali M, Dammak F (2017) Numerical prediction of the ductile damage in single point incremental forming process. Int J Mech Sci 131–132:546–558
Belhassen L, Koubaa S, Wali M, Dammak F (2016) Numerical prediction of springback and ductile damage in rubber-pad forming process of aluminum sheet metal. Int J Mech Sci 218–26
Belhassen L, Koubaa S, Wali M, Dammak F (2017) Anisotropic effects in the compression beading of aluminum thin-walled tubes with rubber. Thin-Walled Struct 902–10
Bouhamed A, Jrad H, Ben Said L, Wali M, Dammak F (2018) A non-associated anisotropic plasticity model with mixed isotropic–kinematic hardening for finite element simulation of incremental sheet metal forming process. Int J Adv Manuf Technol. https://doi.org/10.1007/s00170-018-2782-3
Chung SY, Swift HW (1953) An experimental investigation into the redrawing of cylindrical shells. Proc Inst Mech Eng B J Eng Manuf 1:437–447. https://doi.org/10.1177/095440545300100126
Cannizzaro L, Micari F, Noto La Diega S (1990) Finite element analysis of the reverse drawing process. J Mater Process Technol 24:441–450
Danckert J, Nielsen KB, Hojbjerg P(1990) Experimental investigation of Numisheet’99 benchmark test C. In: Gelin JC, Picart P (eds.), Proceeding of the fourth international conference and workshop on numerical simulation of 3D sheet forming processes (Numisheet’99), Besancon, France, pp 637–642
Hill R(1979) Math Proc Camb Philos Soc 85:179–191
Koubaa S, Mars J, Wali M, Dammak F (2017) Numerical study of anisotropic behavior of Aluminum alloy subjected to dynamic perforation. Int J Impact Eng 101:105–114
Koubaa S, Belhassen L, Wali M, Dammak F (2017) Numerical investigation of the forming capability of bulge process by using rubber as a forming medium. Int J Adv Manuf Technol 92:1839–1848
Mars J, Wali M, Jarraya A, Dammak F, Dhiab A (2015) Finite element implementation of an orthotropic plasticity model for sheet metal in low velocity impact simulations. Thin Walled Struct 89:93–100
Mars J, Ben Said L, Wali M, Dammak F (2018) Elasto-plastic modelling of low-velocity impact on functionally graded circular plates. Int J Appl Mech 10(04):1850038
Mars J, Chebbi E, Wali M, Dammak F (2018) Numerical and experimental investigations of low velocity impact on glass fiber–reinforced polyamide. Compos B 146(1):116–123
Neto DM, Oliveira MC, Alves JL, Menezes LF (2014) Influence of the plastic anisotropy modelling in the reverse deep drawing process simulation. Mater Design 60:368–379
Ghorbel O, Mars J, Koubaa S, Wali M, Dammak F (2019) Coupled anisotropic plasticity-ductile damage: Modeling, experimental verification, and application to sheet metal forming simulation. Int J Mech Scie 150:548–560
Parsa MH, Yamaguchi K, Takakura N, Imatani S (1994) Consideration of the re-drawing of sheet metals based on finite-element simulation. J Mater Process Technol 47:1–2
Thuillier S, Manach PY, Menezes LF, Oliveira MC (2002) Experimental and numerical study of reverse re-drawing of anisotropic sheet metals. J Mater Process Technol 125–126:764–771
Thuillier S, Manach PY, Menezes LF (2010) Occurrence of strain path changes in a two-stage deep drawing process. J Mater Process Technol 210:226–232
Wali M, Autay R, Mars J, Dammak F (2015) A simple integration algorithm for a non-associated anisotropic plasticity model for sheet metal forming. Int J Numer Meth Eng 107(3):183–204
Wali M, Chouchene H, Ben Said L, Dammak F (2015) One-equation integration algorithm of a generalized quadratic yield function with Chaboche non-linear isotropic/kinematic hardening. Int J Mech Sci 92:223–232
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Ghorbel, O., Koubaa, S., Mars, J., Wali, M., Dammak, F. (2020). Numerical Investigation of Reverse Redrawing Process Using a Non Associated Flow Rule. In: Aifaoui, N., et al. Design and Modeling of Mechanical Systems - IV. CMSM 2019. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-27146-6_50
Download citation
DOI: https://doi.org/10.1007/978-3-030-27146-6_50
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-27145-9
Online ISBN: 978-3-030-27146-6
eBook Packages: EngineeringEngineering (R0)