Abstract
The monograph is focused on study of the influence of the selected technological parameters of die casting upon strength and use properties of Al–Si alloy casts produced in die casting. The monograph contains a theoretical part paying attention to the description of die casting technology. The practical part revolves around detection of relation between selected technological parameters of die casting in regard to strength and use properties represented by tensile strength and porosity of die casts. The result is characterized relation between the observed technological parameters of die casting and the examined properties of die casts on the basis of Al–Si. The assessment of the individual experiments included dependence between the technological parameters and the examined properties of the cast.
This monograph has been supported by the projects KEGA 006TUKE-4/2017.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
J. Ružbarský, E. Ragan: The stress of machine parts for pressure die casting and dies that are in contact with liquid metal—2005, in Výrobné Inžinierstvo, vol. 1 (2005), pp. 44–46. ISSN 1335-7972
A.N. Vilenneue, A.M. Samuel, F.H. Samuel, Role of trace elements in enhancing the performance of 319 aluminium foundry alloy. AFS Trans. (23) (2001)
Š. Michna, a kol., Aluminum Encyclopedia (Adin, s.r.o., Prešov, 2005)
E. Ragan, a kol., Casting of Metals Under Pressure, 1st edn. (Prešov, 2007), 392 s. ISBN 978-80-8073-979-9
J. Ružbarský, J. Žarnovský, Effect of input casting pressure parameters on casting structure quality, 2009, in Quality and Reliability of Technical Systems: 14th International Scientific Conference, Nitra, 19–20 May 2009 (SAU, Nitra, 2009), pp. 194–197. ISBN 9788055202228
J. Ružbarský, J. Paško, Š. Gašpár, Techniques of Die Casting (RAM-Verlag, Lüdenscheid, 2014), 199 pp. ISBN 978–3-942303-29-3
D. Bolibruchová, E. Tillová, Foundry Alloys Al–Si (ŽU, Žilina, 2005)
J. Campbell, R.A. Harding, Introduction to Casting Technology (The University of Birmingham, Birmingham, 1994)
Z. Gedeonová, Casting Theory (ALFA, Bratislava, 1990)
R. Majerník, J. Ružbarský, Methods for assessing the internal structure of the castings. 2015, in Technofórum 2015: New Trends in Machinery and Technologies for Biosystems (SAU, Nitra, 2015), S. 191–196. ISBN 978-80-552-1325-5
R. Kožený, Metallurgy and technology of aluminum foundry alloys, in Vocational Training of Ferrous and Non-ferrous Metal Workers (Rajecké Teplice, 2002)
J. Ružbarský, J. Dobránsky, J. Žarnovský, The stress of machine parts for pressure die casting and dies that are in contact with liquid metal influencing their service. 2010, in Proceedings of the Technical University of Mining—Technical University of Ostrava—Machine Series, vol. 56, no. 1 (2010), pp. 309–312. ISSN 1804-0993
L. Frommer, Druckgiess-Technik (Berlín, 1965)
P. Veles, Mechanical Properties and Testing of Metals, 2nd edn. (Alfa, Bratislava, 1989)
Ľ. Boháčik, S. Hloch, Fluid Mechanics and Aerodynamics (FVT TU Košice with seat in Prešove, Prešov, 2003)
T. Grígerová, I. Lukáč, R. Kořený, Foundry of Non-ferrous Metals, 1st edn. (Alfa, Bratislava, 1988)
E. Tillová, Alloy structure evaluation Al–Si, in Vocational Training of Ferrous and Non-ferrous Metal Workers (Rajecké Teplice, 2002)
F. Jandoš, R. Říman, A. Gemperle, Utilization of Modern Laboratory Methods in Metallography (STNL, Praha, 1985)
L. Ptáček, Non-destructive Casting Tests (Slévárenství, 2003)
J. Ružbarský, Influence of technological parameters of die casting on casting structure, in Slévárenství, vol. 57, no. 3–4 (2009), pp. 80–82. ISSN 0037-6825
M. Edwards, M. Endean, Manufacturing with Materials (The Open University, U.K., 1990)
Ľ. Boháčik, S. Hloch, Thermomechanics (FVT TU Košice with seat in Prešove, Prešov, 2006)
J. Ružbarský, J. Žarnovský, Dynamics of die casting. 2014, in Quality, Technology, Diagnostics in Technical Systems (SAU, Nitra, 2014), pp. 140–145. ISBN 978-80-552-1194-7
M.A.A. Najafabai, S. Khan, A. Ourdjini, R. Elliot, The flake fibre transition in aluminium-silicon eutectic alloys. Cast Metals 8(1) (1994)
E. Ragan, J. Ružbarský, Parameters stating in the die cavity 2006, in Materiálové inžinierstvo, vol. 3 (2006), pp. 21–22. ISSN 1335-0803
P. Řezníček, Evaluation of melt quality, in Current Knowledge of Materials and Technological Processes in Aluminum Alloy Foundry (Mladá Boleslav, 1995)
M. Jermy, Fluid Mechanics A Course Reader (Mechanical Engineering Dept., University of Canterbury, 2005), pp. 5–10
V. Gorjany, P.J. Mauk, O. Mzronova, Thixomolding Giesserei 2(2006)
O. Irretier, Heat Treatment of Aluminum Components—A Fully Automated Design Concept Reduces Heat Treatment Costs (Slévarenství, 2001)
J. Malik, Foundry Machines and Equipment (HF TU Košice, 2006)
T. Podrábsky, P. Skočovský, Colour contrast in practical metallography. Acta Metall. Slov. 8 (2002)
I. Pavlík, J. Chrást, Furnaces for Melting, Maintaining and Casting Iron and Non-ferrous Metal Alloys (Slévárenství, 1994)
L. Ptáček, Defects in Aluminum Alloy Casting (Slévárenství, 1998)
H.K. Barton, Giesserei-Praxis 4, 102 (1966)
I. Durmis, Heat treatment of non-ferrous metals and their alloys, in Vocational Training of Ferrous and Non-ferrous Metal Workers (RT, 2002)
E.J. Vinarcik, High Integrity Die Casting Processes (Wiley, New York, 2003)
J. Ružbarský, R. Majerník, P. Hrabě, P. Valášek, Dynamics of treatment device for die casting of metals. 2016, in Key Engineering Materials: Operation and Diagnostics of Machines and Production Systems Operational States 3, vol. 669 (2016), pp. 327–334. ISSN 1013-9826
E. Ragan, J. Ružbarský, I. Andrejčák, Development and prospects of pressure die casting—2005, in Slévárenství, vol. 2–3 (2005), pp. 84–87. ISSN 0037-6825
Š. Michna, P. Lukáč, Color Contrast, Structure and Defects in Aluminum and its Alloys (Delta print, Děčín, 2003)
S. Murali, K.S. Raman, K.S. Murthy, Al–Si cast alloys: a new approach of property improvement. Trans. AFS 165 (1996)
R. Majerník, J. Ružbarský, Process of assessment of porosity of die-casts based on Al–Si. 2015, in Posterus.sk, vol. 9 (2015), pp. 1–8. ISSN 1338-0087
F. Paray, J.E. Gruyleski, Microstructure—mechanical property relationships in a 356 alloy. Part I: microstructure. Cast Metals 7(1) (1994)
F.C. Bennet, What to expect from a vacuum die casting. Br. Foundryman 54(2), 54–58, 507 (1961)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2019 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this chapter
Cite this chapter
Ružbarský, J. (2019). Al–Si Alloy Casts by Die Casting. In: Al-Si Alloys Casts by Die Casting. SpringerBriefs in Applied Sciences and Technology. Springer, Cham. https://doi.org/10.1007/978-3-030-25150-5_1
Download citation
DOI: https://doi.org/10.1007/978-3-030-25150-5_1
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-25149-9
Online ISBN: 978-3-030-25150-5
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)