Abstract
This paper specified the research results of internal stress with films of water and UV water varnish formed on a solid base. Internal stress occurring by the change of volume in the hardening and adhesion between film and substrate. The hardening process of the studied water-based varnish is achieved by UV radiation. The console method was used to determine the internal strain. This method is based on the principle that one end of the thin elastic narrow panel is fixed. The influence of the film thickness as well as internal stress kinetics has been controlled. In the kinetics of the internal stresses on investigated water and UV water varnish, it is possible to notice the period in which we have an intense evaporation of the volatile components and the first occurrence of the internal stresses, the time of the internal stresses to reach the maximum, the period of maximum retention stress at the achieved level.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Axelsen, S.T., et al.: Topcoat flaking - a mechanism study. Party 1; Laboratory testing internal stress, mechanical properties, adhesion and ageing. Corrosion, March 16–20, New Orleans, USA, p. 14 (2008)
Grigore, E., Ruset, C., Short., Hoeft, D., Dong, H., Li, X.Y., Bellt, T.: In situ investigation of the internal stress within the nc-Ti2 N/nc –TiN nanocomposite coatings produced by a combined magnetron sputtering and ion implantation method. Surf. Coat.S Technol. 200(1–4), 744–747, ISSN O257-8972 (2005)
Jaić, M., Živadin, R.: Površinska obrada drveta – svojstva materijala, kvalitet obrade. SITZAMS, Beograd, Srbija (1993)
Sanzarovski, A.T.: Metodi opredelenija mehaničeskih i adgezionih svoistv polimerih pokriti, Moskva (1974)
Volinsky, A.A., Moody, N.R., Gerberich, W.W.: Interfacial toughness measurements for thin films on substrates. Act Mater. 50(30), 441–466 (2002)
Gerald Stoney, G.: The stress of metallic films deposited by electrolysis. In: Proceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character, vol. 82, no. 553, pp. 172–175 (1999)
Vela, J.B., Adhihetty, I.S., Junker, K., Volinsky, A.A.: Mechanical Properties and fracture toughness of Organe – silicate Glass (OSG) low-k dielectric thim films for microelectronic application. Int. J. Fract. 119(4), 487–499 (2003)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Azemović, E., Busuladžić, I., Horman, I. (2020). Internal Stress in Water - Water UV Varnish. In: Avdaković, S., Mujčić, A., Mujezinović, A., Uzunović, T., Volić, I. (eds) Advanced Technologies, Systems, and Applications IV -Proceedings of the International Symposium on Innovative and Interdisciplinary Applications of Advanced Technologies (IAT 2019). IAT 2019. Lecture Notes in Networks and Systems, vol 83. Springer, Cham. https://doi.org/10.1007/978-3-030-24986-1_40
Download citation
DOI: https://doi.org/10.1007/978-3-030-24986-1_40
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-24985-4
Online ISBN: 978-3-030-24986-1
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)