Skip to main content
SpringerLink
Log in

Investigation of Properties of Mg and Al Based Nano Hybrid-Metallic Composites Processed Through Liquid Processing Technique

  • Conference paper
  • First Online:
Advances in Design, Simulation and Manufacturing II (DSMIE 2019)

Part of the book series: Lecture Notes in Mechanical Engineering ((LNME))

Included in the following conference series:

  • 1651 Accesses

Abstract

This research paper provides comprehensive and extraordinary efforts to carry out novel mechanical behaviour, corrosion testing and metallurgical characterization of aluminium alloy (Al-6061) and Magnesium alloy (Mg-AZ91D) reinforced nano-hybrid metallic composites processed using the liquid processing stir casting technique. These stir casted hybrid nano-metallic composites were manufactured using nano size reinforcements that are SiC, Graphite and Alumina of a size of ~100 nm. The finding of comparative results of casted composites was done by using potentio-dynamic polarization tests in the form of capacitance performance of dielectric properties. The results were reported out and the best results were achieved for aluminium reinforced graphite based composites with better corrosion behaviour performances and high hardness and tensile value of the fabricated composites. The experimental data for Mg-Graphite/ SiC/Al2O3 alloy show good arc-like performance over the frequency range with less impedance. The results also illustrated the good arc-like/weber behaviour over the frequency range examined, and indicate decent corrosion behaviour.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Log in via an institution
Chapter
USD 29.95
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
eBook
USD 169.00
Price excludes VAT (USA)
  • Available as EPUB and PDF
  • Read on any device
  • Instant download
  • Own it forever
Softcover Book
USD 219.99
Price excludes VAT (USA)
  • Compact, lightweight edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

References

  1. Sharma, S., Sharma, S.: Critical review on processing and properties of magnesium matrix composites. J. Mater. Sci. Surf. Eng. 5(7), 696–700 (2017)

    Google Scholar 

  2. Sharma, S., Sudhakara, P., Kumar, S.K.: Overview on vacuum assisted resin infusion molding technique: a novel approach for advanced composites fabrication for aircraft and automotive applications. Int. J. Adv. Res. Sci. Eng. 7(3), 393–402 (2018)

    Google Scholar 

  3. Kannan, C., Ramanujam, R.: Comparative study on the mechanical and microstructural characterisation of AA 7075 nano and hybrid nano-composites produced by stir and squeeze casting. J. Adv. Res. 8(4), 309–319 (2017)

    Article  Google Scholar 

  4. Mohanavel, V., Rajan, K., Senthil, P.V., Arul, S.: Mechanical behaviour of hybrid composite (AA6351+Al2O3+Gr) fabricated by stir casting method. Mater. Today 4(2), 3093–3101 (2017)

    Google Scholar 

  5. Kandpal, B.C., Kumar, J., Singh H.: Fabrication and characterization of Al2O3/Al alloy 6061 composites fabricated by stir casting. Mater. Today 4(2), 2783–2792 (2017)

    Google Scholar 

  6. Liu, J., Li, J., Xu, C.: Interaction of the cutting tools and the ceramic-reinforced metal matrix composites during micro-machining: a review. CIRP J. Manufact. Sci. Technol. 7, 55–70 (2014)

    Article  Google Scholar 

  7. Reddy, A.P., Krishna, P.V., Rao, R.N., Murthy, N.V.: Silicon carbide reinforced aluminium metal matrix nano composites—a review. Mater. Today 4, 3959–3971 (2017)

    Google Scholar 

  8. Kumar, D.S., Sasanka, C.T., Ravindra, K., Suman, K.N.S.: Magnesium and its alloys in automotive applications—a review. Am. J. Mater. Sci. Technol. 4(1), 12–30 (2015). https://doi.org/10.7726/ajmst.2015.1002

    Article  Google Scholar 

  9. Mukhopadhyay, P.: Alloy designation, processing, and use of AA6XXX series aluminium alloys. ISRN Metall. 2012, Article ID 165082, 15 (2012). https://doi.org/10.5402/2012/165082

  10. Stojanovic, B., Babic, M., Mitrovic, S., Vencl, A., Miloradovic, N., Pantic, M.: Tribological characteristics of aluminium hybrid composites reinforced with silicon carbide and graphite. A review. J. Balkan Tribological Assoc. 19(1), 83–96 (2013)

    Google Scholar 

  11. Nino, A., Nakaibayashi, Y., Sugiyama, S., Taimatsu, H.: Microstructure and mechanical properties of WC-SiC composites. Mater. Trans. 52(8), 1641–1645 (2011)

    Article  Google Scholar 

  12. Wei, R.P.: A model for particle-induced pit growth in aluminum alloys. Scr. Mater. 44(11), 2647–2652 (2001)

    Article  Google Scholar 

  13. Bodunrin, M.O., Alaneme, K.K., Chown, L.H.: Aluminium matrix hybrid composites: a review of reinforcement philosophies; mechanical, corrosion and tribological characteristics. J. Mater. Res. Technol. 4(4), 434–445 (2015)

    Article  Google Scholar 

  14. Radhika, N., Subramanian, R., Prasat, S.V.: Tribological behaviour of aluminium/alumina/graphite hybrid metal matrix composite using Taguchi’s techniques. J. Miner. Mater. Charact. Eng. 10(5), 427–443 (2011)

    Google Scholar 

  15. Rohatgi, P.K.: Metal-matrix composites. Defence Sci. J. 43(4), 323–349 (2013)

    Article  Google Scholar 

  16. Dash, D., Samanta, S., Rai, R.N.: Study on fabrication of magnesium based metal matrix composites and its improvement in mechanical and tribological properties—a review. In: IOP Conference Series: Materials Science and Engineering, vol. 377, p. 012133 (2018). https://doi.org/10.1088/1757-899x/377/1/012133

  17. Moona, G., Walia, R.S., Rastogi, V., Sharma, R.: Aluminium metal matrix composites: a retrospective investigation. Indian J. Pure Appl. Phys. 56, 164–175 (2018)

    Google Scholar 

  18. Jurwall, V., Pandey, A., Sharma, A.K.: Fabrication of Nano Hybrid Metal Matrix Composites through Stir Casting Route: A Review. In: IOP Conference Series: Materials Science and Engineering, vol. 377, p. 012142, 1–6 (2018). https://doi.org/10.1088/1757-899x/377/1/012142

  19. Tarelnyk, V., Martsynkovskyy, V., Gaponova, O., et al.: New sulphiding method for steel and cast iron parts. In: IOP Conference Series: Materials Science and Engineering, vol. 233, 012049 (2017). https://doi.org/10.1088/1757-899x/233/1/012049

  20. Zabolotnyi, O., Sychuk, V., Somov, D.: Obtaining of porous powder materials by radial pressing method. In: Ivanov, V., et al. (eds.) Advances in Design, Simulation and Manufacturing. DSMIE 2018. Lecture Notes in Mechanical Engineering, pp. 186–198 (2019). https://doi.org/10.1007/978-3-319-93587-4_20

  21. Berladir, K.V., Hovorun, T.P., Bilous, O.A., Baranova, S.V.: The modeling of the composition and properties of functional materials based on polytetrafluoroethylene. Funct. Mater. 25(2), 342–347 (2018)

    Article  Google Scholar 

  22. Tarelnyk, V., Martsynkovskyy, V., Gaponova, O., et al.: New sulphiding method for steel and cast iron parts. In: IOP Conference Series: Materials Science and Engineering, vol. 233, p. 012049 (2017). https://doi.org/10.1088/1757-899x/233/1/012049

  23. Antoszewski, B., Tarelnyk, V.: Laser texturing of sliding surfaces of bearings and pump seals. In: Applied Mechanics and Materials, vol. 630, pp. 301–307 (2014). https://doi.org/10.4028/www.scientific.net/AMM.630.301

  24. Panchenko, A., Voloshina, A., Kiurchev, S., et al.: Development of the universal model of mechatronic system with a hydraulic drive. East. Eur. J. Enterp. Technol. 4(7(94)), 51–60 (2018). https://doi.org/10.15587/1729-4061.2018.139577

  25. Pavlenko, I., Trojanowska, J., Gusak, O., et al.: Estimation of the reliability of automatic axial-balancing devices for multistage centrifugal pumps. Periodica Polytech. Mech. Eng. 63(1), 52–56 (2019). https://doi.org/10.3311/PPme.12801

    Article  Google Scholar 

  26. Sychuk, V., Zabolotnyi, O., McMillan, A.: Developing new design and investigating porous nozzles for abrasive jet machine. Powder Metall. Met. Ceram. 53(9–10), 600–605 (2015). https://doi.org/10.1007/s11106-015-9655-1

    Article  Google Scholar 

  27. Trojanowska, J., Kolinski, A., Galusik, D., et al.: A methodology of improvement of manufacturing productivity through increasing operational efficiency of the production process. In: Hamrol, A., Ciszak, O., Legutko, S., Jurczyk, M. (eds.) Advances in Manufacturing. Lecture Notes in Mechanical Engineering, pp. 23–32. Springer, Cham (2018)

    Google Scholar 

  28. Povstyanoi, O.Y., Sychuk, V.A., McMillan, A., et al.: Metallographic analysis and microstructural image processing of nozzles for sandblasting produced by powder metallurgy methods. Powder Metall. Met. Ceram. 54(3–4), 234–240 (2015). https://doi.org/10.1007/s11106-015-9705-8

    Article  Google Scholar 

  29. Pavlenko, I., Simonovskiy, V., Ivanov, V., et al.: Implementation of artificial neural network for identification of bearing stiffness characteristics according to the research of critical frequencies of the rotor. In: Ivanov, V., et al. (eds.) Advances in Design, Simulation and Manufacturing. DSMIE-2018. Lecture Notes in Mechanical Engineering, pp. 325–335 (2019). https://doi.org/10.1007/978-3-319-93587-4_34

Download references

Author information

Authors and Affiliations

  1. CSIR-Central Leather Research Institute, Regional Centre for Extension & Development, Leather Complex Kapurthala Road, Jalandhar, 144021, Punjab, India

    Shubham Sharma

  2. School of Mechanical and Mechatronics Engineering, University of Technology Sydney (UTS), Sydney, NSW, 2007, Australia

    Mandeep Singh

  3. Centre for Nanoscience and Technology, IST, JNTUH, Hyderabad, India

    N. Jayaram-Babu & Kalagadda Venkateswara Rao

  4. IK Gujral Punjab Technical University, Kapurthala, 144603, Punjab, India

    Jujhar Singh

Authors
  1. Shubham Sharma
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Mandeep Singh
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. N. Jayaram-Babu
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Kalagadda Venkateswara Rao
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Jujhar Singh
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Shubham Sharma .

Editor information

Editors and Affiliations

  1. Sumy State University, Sumy, Ukraine

    Vitalii Ivanov

  2. Poznan University of Technology, Poznań, Poland

    Justyna Trojanowska

  3. University of Minho, Guimaraes, Portugal

    Jose Machado

  4. Sumy State University, Sumy, Ukraine

    Oleksandr Liaposhchenko

  5. Prešov, Slovakia

    Jozef Zajac

  6. Sumy State University, Sumy, Ukraine

    Ivan Pavlenko

  7. University of West Bohemia, Pilsen, Czech Republic

    Milan Edl

  8. University of Zagreb, Zagreb, Croatia

    Dragan Perakovic

Rights and permissions

Reprints and permissions

Copyright information

© 2020 Springer Nature Switzerland AG

About this paper

Check for updates. Verify currency and authenticity via CrossMark

Cite this paper

Sharma, S., Singh, M., Jayaram-Babu, N., Rao, K.V., Singh, J. (2020). Investigation of Properties of Mg and Al Based Nano Hybrid-Metallic Composites Processed Through Liquid Processing Technique. In: Ivanov, V., et al. Advances in Design, Simulation and Manufacturing II. DSMIE 2019. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-22365-6_47

Download citation

  • DOI: https://doi.org/10.1007/978-3-030-22365-6_47

  • Published:

  • Publisher Name: Springer, Cham

  • Print ISBN: 978-3-030-22364-9

  • Online ISBN: 978-3-030-22365-6

  • eBook Packages: EngineeringEngineering (R0)

Publish with us

Policies and ethics

Search

Navigation