Abstract
One of the important tasks of modern engineering is the creation of the theoretical foundations of the technological processes design in parts manufacture. Of particular relevance to the formalization of design acquired in recent years due to the widespread tendency to design automation and the creation of smart industries. This is confirmed by the concept of the Fourth Industrial Revolution (Industry 4.0). In the course of designing manufacturing parts technology on machine tools, it is necessary to solve two problems related to the generation of geometric configuration. One of the tasks is to find solutions to get the desired shape for each surface of the part. Another task is to find the conditions, tools, and mechanisms to ensure a given relative position of the part surfaces in a three-dimensional space. The article considers the formal method developed by the authors for the formation of basing schemes and their sequence. The basis of this technique is to simulate the processing of all surfaces of a part with a sequential change of bases. The modeling of the machining process is carried out on the basis of coordinating dimensional connections between the surfaces of the part. Direct keeping of the specified dimensions allows you to guarantee the requirements of the relative position of the part surfaces to each other.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Skander A, Roucoules L, Klein Meyer JS (2008) Design and manufacturing interface modelling for manufacturing processes selection and knowledge synthesis in design. Int J Adv Manuf Technol 37:443. https://doi.org/10.1007/s00170-007-1003-2
Yusof Y, Latif K (2014) Survey on computer-aided process planning. Int J Adv Manuf Technol 75:77. https://doi.org/10.1007/s00170-014-6073-3
Bazrov BM (2001) Modular technology in mechanical engineering. Engineering 367 p
Mitrofanov SP (1976) Scientific organization of labor of machine-building production. Engineering 712 p
Legoff O, Hascoet JY (2010) Technological form defects identification using discrete cosine transform method. Int J Adv Manuf Technol 52–58
Desrochers A (ed) Methodologie de conversion des specifications geometriques de tolerance en zones d’incertitude. Sherbrooke (Québec), Canada
Gologlu C (2004) A constraint-based operation sequencing for a knowledge-based process planning. J Intell Manuf 15(4):463–470
Halevi G (2014) Industrial management—control and profit, Lecture notes in management and industrial engineering 1, Springer International Publishing, Switzerland. https://doi.org/10.1007/978-3-319-03470-6_1
Lelyukhin VE, Kolesnikova OV, Kuzminova TA, Antonenkova TV (2015) Formal representation of parts for the automated development of manufacturing technology. Sci Mag High Technol Eng 11:32–36
Tolérancement modal De la Métrologie vers les Spécifications. Laboratoire Systèmes et Matériaux pour la Mecatronique d’Annecy et du Centre Technique de l’industrie du Décolletage à Cluses (2009), 192 p
Villeneuve F, Mathieu L (eds) (2010) Geometric tolerancing of products. Library of Congress Cataloging-in-Publication Data, Wiley-ISTE, 400 p
Lelyukhin V (2015) The theory of synthesis of methods for shaping the surfaces of a part. LAP LAMBERT Academic Publishing, Germany, 80 p
Zhukov EA, Kozar I, Rozovskii BY, Degtyarev VV, soloveitchik AM (2000) Engineering technology. Part II. Design of technological processes: studies. Manual, Izd-vo SPBSTU, SPb, 498 p
Lelyukhin VE, Kolesnikova OV, Ignatev FYu (2018) Research of influence of structure of the dimensional relations on processing of the parts. In: Materials of the international scientific-practical conference “Actual issues of contemporary science”. FECIT, Vladivostok, April, pp 3–27
Lelyukhin VE, Kuzminova TA, Kolesnikova OV (2015) Influence of geometrical configuration details on the technology of its manufacture. Modern scientific research and innovations, no 7. http://web.snauka.ru/issues/2015/07/56318. Accessed 19 Sept 1998
Lelyukhin VE, Antonenkova TV, Kolesnikova OV (2016) Structural-parametric representation of the relative position of surfaces part. Science Magazine. Vestnik of the engineering school of the FEFU, vol 1, pp 3–9
Gorelskaya LV, Kostryukov AV, Pavlov SI (2008) Descriptive geometry. Tutorial. OSU, Orenburg, 85 p
Tsitsiashvili GS, Lelyukhin VE, Kolesnikova OV, Osipova MA (2017) Formal design of structure process in machining parts. Appl Math Sci 11:1573–1580. https://doi.org/10.12988/ams.2017.75167
Matveev VV (1980) The dimensional analysis of technological processes. Mechanical engineering, Moscow, 592 p
Cayley AA (1889) Theorem on trees. Quart J Pure Appl Math 23:376–378; Collected mathematical papers, vol 13. Cambridge University Press, pp 26–28 (1897)
Diestel R (2005) Graph theory, Elektronik Eedition. Springer, Heidelberg
Lelyukhin VE, Kolesnikova OV (2015) Analysis and calculation of dimensional chains based on graphs of dimensional relationships. Vestn ES FEFU 4:3–12
Lelyukhin VE, Ignatev FYu, Drenin AS, Kolesnikova OV (2018) Geometry to describe the real components of machines. Mod High Technol 8:95–99
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Kolesnikova, O.V., Lelyukhin, V.E., Ignatev, F.Y. (2020). Formation of Schemes Generating Geometric Structure of Machine Parts. In: Radionov, A., Kravchenko, O., Guzeev, V., Rozhdestvenskiy, Y. (eds) Proceedings of the 5th International Conference on Industrial Engineering (ICIE 2019). ICIE 2019. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-22063-1_38
Download citation
DOI: https://doi.org/10.1007/978-3-030-22063-1_38
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-22062-4
Online ISBN: 978-3-030-22063-1
eBook Packages: EngineeringEngineering (R0)