Abstract
This chapter briefs the importance of performance evaluation criteria in the design of heat exchangers for single-phase flow and two-phase flow. The objectives and constraints in developing different performance evaluation criteria have been discussed.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Webb RL, Eckert ER (1972) Application of rough surfaces to heat exchanger design. Int J Heat Mass Transfer 15(9):1647–1658
Webb RL (1981) Performance evaluation criteria for use of enhanced heat transfer surfaces in heat exchanger design. Int J Heat Mass Transfer 24(4):715–726
Bergles AE (1981) Applications of heat transfer augmentation. In: Kakac S, Bergles AE, Mayinger F (eds) Heat exchangers: thermal hydraulic fundamentals and design. Hemisphere, Washington, DC
Webb RL, Bergles AE (1983) Performance evaluation criteria for selection of heat transfer surface geometries used in low Reynolds number heat exchangers. In: Kakac S, Shah RK, Bergles AE (eds) Low Reynolds number flow heat exchangers. Hemisphere, Washington, DC
Bergles AE, Blumenkrantz AR, Taborek, J (1974a) Performance evaluation criteria for enhanced heat transfer surfaces. In: Proc. 4th int. heat transfer conf., vol 2, pp 239–243
Bergles AE, Bunn RL, Junkhan GH (1974b) Extended performance evaluation criteria for enhanced heat transfer surfaces. Lett Heat Mass Transfer 1:113–120
Hewitt GF, Shires GL, Bott RL (1994) Process heat transfer. Begell House, New York, pp 11–42
Evans LB, Churchill SW (1962) Chem Eng Prog Symp Ser 58(10):55
Webb RL (1982) Performance, cost effectiveness, and water-side fouling considerations of enhanced tube heat exchangers for boiling service with tube-side water flow. Heat Transfer Eng 3(3–4):84–98
Brown TR (1986) Use these guidelines for quick preliminary selection of heat-exchanger type. Chem Eng 93:107–108
El-Sayed M (1999) Revealing the cost-efficiency trends of the design concepts of energy-intensive systems. Energy Convers Manag 40:1599–1615
Fraas AP (1989) Heat exchanger design. John Wiley, New York, pp 216–228
Fan JF, Ding WK, Zhang JF, He YL, Tao WQ (2009) A performance evaluation plot of enhanced heat transfer techniques oriented for energy-saving. Int J Heat Mass Transfer 52(1–2):33–44
Andrews MJ, Fletcher LS (1996) Comparison of several heat transfer enhancement technologies for gas heat exchangers. J Heat Transfer 118:897–902
Bergwerk W (1963) The utilisation of research data in heat exchanger design. Proc IMechE 178:55–81
Heggs PJ, Stones PR (1980) Improved design methods for finned tube heat exchangers. Trans IChemE 58:147–154
Sano Y, Usui H (1982) Evaluation of heat transfer promoters by the fluid dissipation energy. Heat Transfer Jpn Res 11:91–96
Norris RH (1970) Some simple approximate heat transfer correlations for turbulent flow in ducts with rough surfaces, in augmentation of convective heat and mass transfer. ASME 16:16–26
Sparrow EM, Liu CH (1979) Heat-transfer, pressure-drop and performance relationships for in-line, staggered, and continuous plate heat exchangers. Int J Heat Mass Transfer 22:1613–1625
Zimparov VD, Vulchanov NL, Delov LB (1991) Heat transfer and friction characteristics of spirally corrugated tubes for power plant condensers—1. Experimental investigation and performance evaluation. Int J Heat Mass Transfer 34(9):2187–2197
Yılmaz M, Yapıcı S, Çomaklı Ö, Şara ON (2002) Energy correlation of heat transfer and enhancement efficiency in decaying swirl flow. Heat Mass Transfer 38(4–5):351–358
Jiang PX, Fan MH, Si GS, Ren ZP (2001) Thermal-hydraulic performance of small cale micro-channel and porous-media heat exchangers. Int J Heat Mass Transfer 44:1039–1051
Zukauskas A (1986) Heat transfer augmentation in single-phase flow. In: Proc. 8th int. heat transf. conf., vol 1, pp 47–57
Zhang YM, Gu WZ, Han JC (1994) Heat transfer and friction in rectangular channels with ribbed or ribbed-grooved walls. J Heat Transfer 116:58–65
Zaherzadeh NH, Jagadish BS (1975) Heat transfer in decaying swirl flows. Int J Heat Mass Transfer 18:941–944
Yapici S (1999) Energetic correlation of local mass transfer in swirling pipe flow. Ind Eng Chem Res 38:1712–1717
Wood AS, Tupholme GE, Bhatti MIH, Heggs PJ (1996) Performance indicators for steady-state heat transfer through fın assemblies. J Heat Transfer 118:310–316
William F, Pirie MAM, Warburton C (1970) Heat transfer from surfaces roughened by ribs. In: Bergles AE, Webb RL (eds) Augmentation of convective heat and mass transfer. ASME, New York, pp 36–43
Webb RL, Eckert ERG, Goldstein RJ (1971) Heat transfer and friction in tubes with repeated-rib roughness. Int J Heat Mass Transfer 14:601–617
Webb RL (1994) Principles of enhanced heat transfer. John Wiley, New York
Sorlie T (1962) Three-fluid heat exchanger design theory, counter and parallel flow. Tr. No. 54. Department of Mechanical Engineering, Stanford University, CA
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2020 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this chapter
Cite this chapter
Saha, S.K., Ranjan, H., Emani, M.S., Bharti, A.K. (2020). Introduction. In: Performance Evaluation Criteria in Heat Transfer Enhancement. SpringerBriefs in Applied Sciences and Technology(). Springer, Cham. https://doi.org/10.1007/978-3-030-20758-8_1
Download citation
DOI: https://doi.org/10.1007/978-3-030-20758-8_1
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-20760-1
Online ISBN: 978-3-030-20758-8
eBook Packages: EngineeringEngineering (R0)