Abstract
This paper presents a methodology to find the largest sphere inside the constant orientation wrench-closure workspace of spatial cable-driven parallel robots driven by seven cables. The sphere is centred at a prescribed point of interest and is obtained for a given orientation of the moving platform. The method builds upon the analytical description of the boundary of the constant orientation wrench-closure workspace to obtain the desired spheres. The problem has been reduced to solving seven systems, each consisting of three cubic polynomial equations in three unknowns. A computer algebra system (CAS) has been used to solve these systems of equations, using a formulation based on Sylvester’s dialytic elimination and generalised eigenproblem, which has been illustrated through an example.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Gouttefarde, M., Gosselin, C. M.: On the Properties and the Determination of the Wrench-Closure Workspace of Planar Parallel Cable-Driven Mechanisms. In: Proceedings of DETC’04, ASME 2004 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Salt Lake City, Utah, USA, pp. 337–346. American Society of Mechanical Engineers (2004)
Sheng, Z., Park, J.-H., Stegall, P., Agrawal, S. K.: Analytic Determination of Wrench Closure Workspace of Spatial Cable Driven Parallel Mechanisms. In: Proceedings of the ASME 2015 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Boston, Massachusetts, USA, p. V05CT08A048; 10 pages. American Society of Mechanical Engineers (2015)
Nag, A., Reddy, V., Agarwal, S., Bandyopadhyay, S.: Identifying Singularity-Free Spheres in the Position Workspace of Semi-regular Stewart Platform Manipulators. In: J. Lenarčič, J.P. Merlet (eds.) Advances in Robot Kinematics 2016, pp. 421–430. Springer International Publishing, Cham, Switzerland (2018). DOI https://doi.org/10.1007/978-3-319-56802-7
Jiang, Q., Gosselin, C. M.: Determination of the maximal singularity-free orientation workspace for the Gough-Stewart platform. Mechanism and Machine Theory 44(6), 1281–1293 (2009)
Bayani, H., Masouleh, M. T., Karimi, A., Cardou, P., Ebrahimi, M.: On the determination of the maximal inscribed ellipsoid in the Wrench-Feasible Workspace of the cable-driven parallel robots. In: Proceedings of the 2nd RSI/ISM International Conference on Robotics and Mechatronics (ICRoM), Tehran, Iran, pp. 422–427. IEEE (2014)
Gouttefarde, M., Merlet, J.-P., Daney, D.: Wrench-Feasible Workspace of Parallel Cable-Driven Mechanisms. In: 2007 IEEE International Conference on Robotics and Automation, Roma, Italy, pp. 1492–1497. IEEE (2007)
Salmon, G.: Lessons Introductory to the Modern Higher Algebra (4th Ed.). Hodges, Figgis, and Co., Grafton Street, Dublin, Ireland (1885)
Golub, G. H., Van Loan, C. F.: Matrix Computations. Johns Hopkins Studies in the Mathematical Sciences. Johns Hopkins University Press, Baltimore, Maryland, USA (2013)
Azizian, K., Cardou, P.: The Dimensional Synthesis of Spatial Cable-Driven Parallel Mechanisms. Journal of Mechanisms and Robotics 5(4), 044, 502; 8 pages (2013)
Murray, R. M., Li, Z., Sastry, S. S.: A Mathematical Introduction to Robotic Manipulation. CRC Press, Boca Raton, Florida, USA (1994)
Verhoeven, R.: Analysis of the Workspace of Tendon-based Stewart Platforms. PhD thesis, Germany: University of Duisburg-Essen (2004)
Wilkinson, J. H.: The Evaluation of the Zeros of Ill-conditioned Polynomials. Part I and II. Numerische Mathematik 1(1), 150–166 and 167–180 (1959). DOI https://doi.org/10.1007/BF01386382
Wolfram Research, Inc.: Mathematica, Version 11.1.1. Champaign, IL (2018)
Pott, A., Kraus, W.: Determination of the Wrench-Closure Translational Workspace in Closed-Form for Cable-Driven Parallel Robots. In: 2016 IEEE International Conference on Robotics and Automation (ICRA), Stockholm, Sweden, pp. 882–887 (2016). DOI https://doi.org/10.1109/ICRA.2016.7487218
Kilaru, J., Karnam, M.K., Agarwal, S., Bandyopadhyay, S.: Optimal design of parallel manipulators based on their dynamic performance. In: Proceedings of the 14th IFToMM World Congress, pp. 406–412. Tapei, Taiwan (25-30, October, 2015)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Shahi, A., Bandyopadhyay, S. (2019). Identifying the largest sphere inscribed in the constant orientation wrench-closure workspace of a spatial parallel manipulator driven by seven cables. In: Pott, A., Bruckmann, T. (eds) Cable-Driven Parallel Robots. CableCon 2019. Mechanisms and Machine Science, vol 74. Springer, Cham. https://doi.org/10.1007/978-3-030-20751-9_14
Download citation
DOI: https://doi.org/10.1007/978-3-030-20751-9_14
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-20750-2
Online ISBN: 978-3-030-20751-9
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)