Abstract
Hydrogels are cross-linked polymers that can absorb and hold large amounts of water and aqueous solutions due to the presence of hydrophilic functional groups in their 3D network. These materials also serve as vehicles of different active compounds because they can regulate their release rate. Because of such properties, hydrogels are currently used in many areas including agriculture, mainly as water retention agents for soil conditioning, and as carriers of agrochemicals for their slow or sustained-release. However, most of the hydrogels currently available on the market are based on polyacrylamide and acrylate derivatives, which means that they are not completely biodegradable, i.e. are considered as potential soil contaminants and present certain degree of toxicity. In this context, the development of biodegradable hydrogels for their use in agriculture is gaining interest worldwide. Biopolymers such as chitosan, cellulose, alginate and their derivatives are being explored due to their biocompatibility, biodegradability and low cost. Briefly, in this chapter, recent studies on biopolymer-based hydrogels for their use in agriculture are discussed in terms of their synthesis, swelling behavior, as well as their uses for slow and controlled release of agrochemicals.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Abdel-Raouf, M. E., El-Saeed, S. M., Zaki, E. G., & Al-Sabagh, A. M. (2018). Green chemistry approach for preparation of hydrogels for agriculture applications through modification of natural polymers and investigating their swelling properties. Egyptian Journal of Petroleum., 27, 1345–1355. https://doi.org/10.1016/j.ejpe.2018.09.002.
Ahmed, E. M. (2015). Hydrogel: Preparation, characterization, and applications: A review. Journal of Advanced Research, 6(2), 105–121. https://doi.org/10.1016/j.jare.2013.07.006.
Aouada, F. A., de Moura, M. R., Orts, W. J., & Mattoso, L. H. C. (2010). Polyacrylamide and methylcellulose hydrogel as delivery vehicle for the controlled release of paraquat pesticide. Journal of Materials Science, 45(18), 4977–4985. https://doi.org/10.1007/s10853-009-4180-6.
Aouada, F. A., De Moura, M. R., & Mattoso, L. H. C. (2011). Biodegradable hydrogel as delivery vehicle for the controlled release of pesticide. In M. Stoytcheva (Ed.), Pesticides – Formulations, effects, fate (pp. 81–102). https://doi.org/10.5772/14139.
Azeem, B., Kushaari, K., Man, Z. B., Basit, A., & Thanh, T. H. (2014). Review on materials & methods to produce controlled release coated urea fertilizer. Journal of Controlled Release, 181(1), 11–21. https://doi.org/10.1016/j.jconrel.2014.02.020.
Bai, C., Zhang, S., Huang, L., Wang, H., Wang, W., & Ye, Q. (2015). Starch-based hydrogel loading with carbendazim for controlled-release and water absorption. Carbohydrate Polymers, 125, 376–383. https://doi.org/10.1016/j.carbpol.2015.03.004.
Bajpai, A. K., & Giri, A. (2003). Water sorption behaviour of highly swelling (carboxy methylcellulose-g-polyacrylamide) hydrogels and release of potassium nitrate as agrochemical. Carbohydrate Polymers, 53(3), 271–279. https://doi.org/10.1016/S0144-8617(03)00071-7.
Bawa, P., Pillay, V., Choonara, Y. E., & Du Toit, L. C. (2009). Stimuli-responsive polymers and their applications in drug delivery. Biomedical Materials, 4(2), 109–114. https://doi.org/10.1007/s10751-011-0451-0.
Belmokhtar, F. Z., Elbahri, Z., & Elbahri, M. (2018). Preparation and optimization of agrochemical 2,4-D controlled release microparticles using designs of experiments. Journal of the Mexican Chemical Society, 62(1), 1–21. https://doi.org/10.29356/jmcs.v62i1.579.
Bencherif, S. A., Siegwart, D. J., Srinivasan, A., Horkay, F., Hollinger, J. O., Washburn, N. R., & Matyjaszewski, K. (2009). Nanostructured hybrid hydrogels prepared by a combination of atom transfer radical polymerization and free radical polymerization. Biomaterials, 30(29), 5270–5278. https://doi.org/10.1016/j.biomaterials.2009.06.011.
Bordi, F., Paradossi, G., Rinaldi, C., & Ruzicka, B. (2002). Chemical and physical hydrogels: Two case systems studied by quasi elastic light scattering. Physica A: Statistical Mechanics and its Applications, 304(1–2), 119–128. https://doi.org/10.1016/s0378-4371(01)00537-4.
Bortolin, A., Aouada, F. A., Mattoso, L. H. C., & Ribeiro, C. (2013). Nanocomposite PAAm/methyl cellulose/montmorillonite hydrogel: Evidence of synergistic effects for the slow release of fertilizers. Journal of Agricultural and Food Chemistry, 61(31), 7431–7439. https://doi.org/10.1021/jf401273n.
Calabi-Floody, M., Medina, J., Rumpel, C., Condron, L. M., Hernandez, M., Dumont, M., & Mora, M. de la L. (2018). Smart fertilizers as a strategy for sustainable agriculture. In D. L. Sparks (Ed.), Advances in agronomy (Vol. 147, 1st ed.). Elsevier Inc.. https://doi.org/10.1016/bs.agron.2017.10.003.
Cannazza, G., Cataldo, A., de Benedetto, E., Demitri, C., Madaghiele, M., & Sannino, A. (2014). Experimental assessment of the use of a novel superabsorbent polymer (SAP) for the optimization of water consumption in agricultural irrigation process. Water (Switzerland), 6(7), 2056–2069. https://doi.org/10.3390/w6072056.
Carson, L. C., & Ozores-Hampton, M. (2013). Factors affecting nutrient availability, placement, rate, and application timing of controlled-release fertilizers for Florida vegetable production using seepage irrigation. HortTechnology, 23(5), 553–562. https://doi.org/10.21273/horttech.23.5.553.
Chagas, J. O., Gomes, J. M., de Cunha, I. C. M., de Melo, N. F. S., Fraceto, L. F., da Silva, G. A., & Lobo, F. A. (2018). Polymeric microparticles for modified release of NPK in agricultural applications. Arabian Journal of Chemistry. https://doi.org/10.1016/j.arabjc.2018.03.007.
Chang, C., Duan, B., Cai, J., & Zhang, L. (2010). Superabsorbent hydrogels based on cellulose for smart swelling and controllable delivery. European Polymer Journal, 46(1), 92–100. https://doi.org/10.1016/j.eurpolymj.2009.04.033.
Chapagain, B. P., Wiesman, Z., Zaccai, M., Imas, P., & Magen, H. (2003). Potassium chloride enhances fruit appearance and improves quality of fertigated greenhouse tomato as compared to potassium nitrate. Journal of Plant Nutrition, 26(3), 643–658. https://doi.org/10.1081/pln-120017671.
Chenite, A., Chaput, C., Wang, D., Combes, C., Buschmann, M. D., Hoemann, C. D., Leroux, J. C., Atkinson, B. L., Binette, F., & Selmani, A. (2000). Novel injectable neutral solutions of chitosan form biodegradable gels in situ. Biomaterials, 21(21), 2155–2161. https://doi.org/10.1016/S0142-9612(00)00116-2.
Conte, R., De Luise, A., Valentino, A., Di Cristo, F., Petillo, O., Riccitiello, F., Riccitiello, F., Di Salle, A., Calarco, A., & Peluso, G. (2019). Hydrogel nanocomposite systems: Characterization and application in drug-delivery systems. In S. S. Mohapatra, S. Ranjan, N. Dasgupta, R. K. Mishra, & S. Thomas (Eds.), Nanocarriers for drug delivery (pp. 319–349). https://doi.org/10.1016/B978-0-12-814033-8.00010-2.
Dai, H., Huang, Y., & Huang, H. (2018). Eco-friendly polyvinyl alcohol/carboxymethyl cellulose hydrogels reinforced with graphene oxide and bentonite for enhanced adsorption of methylene blue. Carbohydrate Polymers, 185, 1–11. https://doi.org/10.1016/j.carbpol.2017.12.073.
Dailey, O. D. J. (2004). Volatilization of alachlor from polymeric formulations. Journal of Agricultural and Food Chemistry, 52(22), 6742–6746. https://doi.org/10.1021/jf040034g.
Drozdov, A. D. (2015). Swelling of pH-responsive cationic gels: Constitutive modeling and structure–property relations. International Journal of Solids and Structures, 64–65, 176–190. https://doi.org/10.1016/j.ijsolstr.2015.03.023.
Ehrenhofer, A., Elstner, M., & Wallmersperger, T. (2018). Normalization of hydrogel swelling behavior for sensoric and actuatoric applications. Sensors and Actuators, B: Chemical, 255. (Part 2, 1343–1353. https://doi.org/10.1016/j.snb.2017.08.120.
Ekebafe, L. O., Ogbeifun, D. E., & Okieimen, F. E. (2011). Polymer applications in agriculture. Nigerian Society for Experimental Biology, 23(2), 81–89. https://doi.org/10.4314/biokem.v23i2.
Elbarbary, A. M., El-Rehim, H. A. A., El-Sawy, N. M., Hegazy, E. S. A., & Soliman, E. S. A. (2017). Radiation induced crosslinking of polyacrylamide incorporated low molecular weights natural polymers for possible use in the agricultural applications. Carbohydrate Polymers, 176, 19–28. https://doi.org/10.1016/j.carbpol.2017.08.050.
Essawy, H. A., Ghazy, M. B. M., El-Hai, F. A., & Mohamed, M. F. (2016). Superabsorbent hydrogels via graft polymerization of acrylic acid from chitosan-cellulose hybrid and their potential in controlled release of soil nutrients. International Journal of Biological Macromolecules, 89, 144–151. https://doi.org/10.1016/j.ijbiomac.2016.04.071.
Flores Céspedes, F., Pérez García, S., Villafranca Sánchez, M., & Fernández Pérez, M. (2013). Bentonite and anthracite in alginate-based controlled release formulations to reduce leaching of chloridazon and metribuzin in a calcareous soil. Chemosphere, 92(8), 918–924. https://doi.org/10.1016/j.chemosphere.2013.03.001.
Förster, S., & Antonietti, M. (1998). Amphiphilic block copolymers in structure-controlled nanomaterial hybrids. Advanced Materials, 10(3), 195–217. https://doi.org/10.1002/(sici)1521-4095(199802)10:3<195::aid-adma195>3.0.co;2-v.
França, D., Medina, Â. F., Messa, L. L., Souza, C. F., & Faez, R. (2018). Chitosan spray-dried microcapsule and microsphere as fertilizer host for swellable − controlled release materials. Carbohydrate Polymers, 196, 47–55. https://doi.org/10.1016/j.carbpol.2018.05.014.
Gad, Y. H. (2008). Preparation and characterization of poly(2-acrylamido-2-methylpropane-sulfonic acid)/chitosan hydrogel using gamma irradiation and its application in wastewater treatment. Radiation Physics and Chemistry, 77(9), 1101–1107. https://doi.org/10.1016/j.radphyschem.2008.05.002.
González, M. E., Cea, M., Medina, J., González, A., Diez, M. C., Cartes, P., Monreal, C., & Navia, R. (2015). Evaluation of biodegradable polymers as encapsulating agents for the development of a urea controlled-release fertilizer using biochar as support material. Science of the Total Environment, 505, 446–453. https://doi.org/10.1016/j.scitotenv.2014.10.014.
Grillo, R., Pereira, A. E. S., Nishisaka, C. S., de Lima, R., Oehlke, K., Greiner, R., & Fraceto, L. F. (2014a). Chitosan/tripolyphosphate nanoparticles loaded with paraquat herbicide: An environmentally safer alternative for weed control. Journal of Hazardous Materials, 278, 163–171. https://doi.org/10.1016/j.jhazmat.2014.05.079.
Grillo, R., Rosa, A. H., & Fraceto, L. F. (2014b). Poly(ε-caprolactone) nanocapsules carrying the herbicide atrazine: Effect of chitosan-coating agent on physico-chemical stability and herbicide release profile. International journal of Environmental Science and Technology, 11(6), 1691–1700. https://doi.org/10.1007/s13762-013-0358-1.
Gross, R. A., & Kalra, B. (2002). Biodegradable polymers for the environment. Science. (New York), 297(5582), 803–807. https://doi.org/10.1126/science.297.5582.803.
Guilherme, M. R., Aouada, F. A., Fajardo, A. R., Martins, A. F., Paulino, A. T., Davi, M. F. T., Rubira, A. F., & Muniz, E. C. (2015). Superabsorbent hydrogels based on polysaccharides for application in agriculture as soil conditioner and nutrient carrier: A review. European Polymer Journal, 72, 365–385. https://doi.org/10.1016/j.eurpolymj.2015.04.017.
Gulrez, S. K. H., Al-Assaf, S., & Phillips, G. O. (2011). Hydrogels: Methods of preparation, characterisation and applications. In A. Carpi (Ed.), Progress in molecular and environmental bioengineering IntechOpen progress in molecular and environmental bioengineering from analysis and modeling to technology applications Edited by Angelo Carpi Progress in molecular and environmental bioengineering. https://doi.org/10.5772/24553.
Gutiérrez, T. J. (2017). Chitosan applications for the food industry. In S. Ahmed & S. Ikram (Eds.), Chitosan: Derivatives, composites and applications (pp. 183–232). WILEY-Scrivener Publisher. EE.UU. ISBN: 978-1-119-36350-7. https://doi.org/10.1002/9781119364849.ch8.
Gutiérrez, T. J. (2018a). Processing nano- and microcapsules for industrial applications. In C. M. Hussain (Ed.), Handbook of nanomaterials for industrial applications (pp. 989–1011). Editorial Elsevier. EE.UU. ISBN: 978-0-12-813351-4. https://doi.org/10.1016/b978-0-12-813351-4.00057-2.
Gutiérrez, T. J. (2018b). Biodegradability and compostability of food nanopackaging materials. In G. Cirillo, M. A. Kozlowski, & U. G. Spizzirri (Eds.), Composite materials for food packaging (pp. 269–296). WILEY-Scrivener Publisher. EE.UU. ISBN: 978-1-119-16020-5. https://doi.org/10.1002/9781119160243.ch9.
Gutiérrez, T. J. (2018c). Biological macromolecule composite films made from Sagu starch and flour/poly(ε-caprolactone) blends processed by blending/thermo molding. Journal Polymers and the Environment, 26(9), 3902–3912. https://doi.org/10.1007/s10924-018-1268-6.
Gutiérrez, T. J. (2018d). Are modified pumpkin flour/plum flour nanocomposite films biodegradable and compostable? Food Hydrocolloids, 83, 397–410. https://doi.org/10.1016/j.foodhyd.2018.05.035.
Gutiérrez, T. J., & Álvarez, K. (2017). Biopolymers as microencapsulation materials in the food industry. In M. Masuelli & D. Renard (Eds.), Advances in physicochemical properties of biopolymers: Part 2 (pp. 296–322). Bentham Science Publishers.. EE.UU. ISBN: 978-1-68108-545-6. eISBN: 978-1-68108-544-9, 2017. https://doi.org/10.2174/9781681085449117010009.
Gutiérrez, T. J., & Alvarez, V. A. (2017a). Eco-friendly films prepared from plantain flour/PCL blends under reactive extrusion conditions using zirconium octanoate as a catalyst. Carbohydrate Polymers, 178, 260–269. https://doi.org/10.1016/j.carbpol.2017.09.026.
Gutiérrez, T. J., & Alvarez, V. A. (2017b). Films made by blending poly(ε-caprolactone) with starch and flour from Sagu rhizome grown at the Venezuelan amazons. Journal Polymers and the Environment, 25(3), 701–716. https://doi.org/10.1007/s10924-016-0861-9.
Gutiérrez, T. J., Toro-Márquez, L. A., Merino, D., & Mendieta, J. R. (2019). Hydrogen-bonding interactions and compostability of bionanocomposite films prepared from corn starch and nano-fillers with and without added Jamaica flower extract. Food Hydrocolloids, 89, 283–293. https://doi.org/10.1016/j.foodhyd.2018.10.058.
Gwon, S. H., Yoon, J., Seok, H. K., Oh, K. H., & Sun, J.-Y. (2015). Gelation dynamics of ionically crosslinked alginate gel with various cations. Macromolecular Research, 23(12), 1112–1116. https://doi.org/10.1007/s13233-015-3151-9.
Hamedi, H., Moradi, S., Hudson, S. M., & Tonelli, A. E. (2018). Chitosan based hydrogels and their applications for drug delivery in wound dressings: A review. Carbohydrate Polymers, 199, 445–460. https://doi.org/10.1016/j.carbpol.2018.06.114.
Heinze, T., Liebert, T., Heublein, B., & Hornig, S. (2006). Functional Polymers based on dextran. In D. Klemm (Ed.), Polysaccharides II. (pp. 199–291). Berlin/Heidelberg: Springer Berlin Heidelberg. https://doi.org/10.1007/12_100.
Hemvichian, K., Chanthawong, A., & Suwanmala, P. (2014). Synthesis and characterization of superabsorbent polymer prepared by radiation-induced graft copolymerization of acrylamide onto carboxymethyl cellulose for controlled release of agrochemicals. Radiation Physics and Chemistry, 103, 167–171. https://doi.org/10.1016/j.radphyschem.2014.05.064.
Hennink, W. E., & van Nostrum, C. F. (2002). Novel crosslinking methods to design hydrogels. Advanced Drug Delivery Reviews, 54(supplement), 13–36. https://doi.org/10.1016/j.addr.2012.09.009.
Herniou--Julien, C., Mendieta, J. R., & Gutiérrez, T. J. (2019). Characterization of biodegradable/non-compostable films made from cellulose acetate/corn starch blends processed under reactive extrusion conditions. Food Hydrocolloids, 89, 67–79. https://doi.org/10.1016/j.foodhyd.2018.10.024.
Holback, H., Yeo, Y., & Park, K. (2011). Hydrogel swelling behavior and its biomedical applications. In S. Rimmer (Ed.), Biomedical hydrogels: Biochemistry, Manufacture and medical applications. Woodhead Publishing Limited. https://doi.org/10.1016/b978-1-84569-590-3.50001-1.
Joshi, S. J., & Abed, R. M. M. (2017). Biodegradation of polyacrylamide and its derivatives. Environmental Processes, 4(2), 463–476. https://doi.org/10.1007/s40710-017-0224-0.
Kalhapure, A., Kumar, R., Singh, V. P., & Pandey, D. S. (2016). Hydrogels: A boon for increasing agricultural productivity in water-stressed environment. Current Science, 111(11), 1773–1779. https://doi.org/10.18520/cs/v111/i11/1773-1779.
Katti, D. S., Lakshmi, S., Langer, R., & Laurencin, C. T. (2002). Toxicity, biodegradation and elimination of polyanhydrides. Advanced Drug Delivery Reviews, 54(7), 933–961. https://doi.org/10.1016/S0169-409x(02)00052-2.
Kenawy, E. R., Chemistry, A., & Akelah, A. (1992). Município de Odivelas, 28(8), 2009. https://doi.org/10.1016/0014-3057(92)90310-x.
Kuijpers, A. J., van Wachem, P. B., van Luyn, M. J., Engbers, G. H., Krijgsveld, J., Zaat, S. A., Dankert, J., & Feijen, J. (2000). In vivo and in vitro release of lysozyme from cross-linked gelatin hydrogels: A model system for the delivery of antibacterial proteins from prosthetic heart valves. Journal of Controlled Release : Official Journal of the Controlled Release Society, 67(2–3), 323–336. https://doi.org/10.1016/s0168-3659(00)00221-2.
Kumar, S., Bhanjana, G., Sharma, A., Sidhu, M. C., & Dilbaghi, N. (2014). Synthesis, characterization and on field evaluation of pesticide loaded sodium alginate nanoparticles. Carbohydrate Polymers, 101, 1061–1067. https://doi.org/10.1016/j.carbpol.2013.10.025.
Li, J., Yao, J., Li, Y., & Shao, Y. (2012). Controlled release and retarded leaching of pesticides by encapsulating in carboxymethyl chitosan/bentonite composite gel. Journal of Environmental Science and Health, Part B, 47(8), 795–803. https://doi.org/10.1080/03601234.2012.676421.
Li, S. (1999). Hydrolytic degradation characteristics of aliphatic polyesters derived from lactic and glycolic acids. Journal of Biomedical Materials Research, 48(3), 342–353. https://doi.org/10.1002/(sici)1097-4636(1999)48:3<342::aid-jbm20>3.0.co;2-7.
Mahdavinia, G. R., Mousavi, S. B., Karimi, F., Marandi, G. B., Shahabivand, S., & Harati, M. (2009). Release behavior of 2,4-dichlorophenoxyacetic acid herbicide using novel porous polyacrylamide hydrogels. E-Polymers, 9(11), 1–13. https://doi.org/10.1515/epoly.2009.9.1.1718.
Mansur, H. S., Oréfice, R. L., & Mansur, A. A. P. (2004). Characterization of poly(vinyl alcohol)/poly(ethylene glycol) hydrogels and PVA-derived hybrids by small-angle X-ray scattering and FTIR spectroscopy. Polymer, 45(21), 7193–7202. https://doi.org/10.1016/j.polymer.2004.08.036.
Mansur, H. S., Sadahira, C. M., Souza, A. N., & Mansur, A. A. P. (2008). FTIR spectroscopy characterization of poly (vinyl alcohol) hydrogel with different hydrolysis degree and chemically crosslinked with glutaraldehyde. Materials Science and Engineering: C, 28(4), 539–548. https://doi.org/10.1016/j.msec.2007.10.088.
Maruyama, C. R., Guilger, M., Pascoli, M., Bileshy-José, N., Abhilash, P. C., Fraceto, L. F., & de Lima, R. (2016). Nanoparticles based on chitosan as carriers for the combined herbicides imazapic and imazapyr. Scientific Reports, 6, 19768. https://doi.org/10.1038/srep19768.
Mekonnen, T., Mussone, P., Khalil, H., & Bressler, D. (2013). Progress in bio-based plastics and plasticizing modifications. Journal of Materials Chemistry A, 1(43), 13379–13398. https://doi.org/10.1039/c3ta12555f.
Milani, P., Franca, D., Balieiro, A. G., & Faez, R. (2017). Polymers and its applications in agriculture. Polímeros, 27(3), 256–266. https://doi.org/10.1590/0104-1428.09316.
Moreira Teixeira, L. S., Feijen, J., van Blitterswijk, C. A., Dijkstra, P. J., & Karperien, M. (2012). Enzyme-catalyzed crosslinkable hydrogels: Emerging strategies for tissue engineering. Biomaterials, 33(5), 1281–1290. https://doi.org/10.1016/j.biomaterials.2011.10.067.
Nayak, P. L. (1999). Biodegradable polymers: Opportunities and challenges. Journal of Macromolecular Science, Part C, 39(3), 481–505. https://doi.org/10.1081/mc-100101425.
Olad, A., Zebhi, H., Salari, D., Mirmohseni, A., & Reyhani Tabar, A. (2018a). Slow-release NPK fertilizer encapsulated by carboxymethyl cellulose-based nanocomposite with the function of water retention in soil. Materials Science and Engineering C, 90, 333–340. https://doi.org/10.1016/j.msec.2018.04.083.
Olad, A., Zebhi, H., Salari, D., Mirmohseni, A., & Tabar, A. R. (2018b). Water retention and slow release studies of a salep-based hydrogel nanocomposite reinforced with montmorillonite clay. New Journal of Chemistry, 42(4), 2758–2766. https://doi.org/10.1039/c7nj03667a.
Pang, S. C., Chin, S. F., Tay, S. H., & Tchong, F. M. (2011). Starch-maleate-polyvinyl alcohol hydrogels with controllable swelling behaviors. Carbohydrate Polymers, 84(1), 424–429. https://doi.org/10.1016/j.carbpol.2010.12.002.
Peppas, N. A., & Van Blarcom, D. S. (2016). Hydrogel-based biosensors and sensing devices for drug delivery. Journal of Controlled Release, 240, 142–150. https://doi.org/10.1016/j.jconrel.2015.11.022.
Pereira, A. G. B., Martins, A. F., Paulino, A. T., Fajardo, A. R., Guilherme, M. R., Faria, M. G. I., Linde, G. A., Rubira, A. F., & Muniz E. C. (2017). Recent advances in designing hydrogels from chitin and chitin-derivatives and their impact on environment and agriculture: A review. Revista Virtual de Quimica, 9(1), 370–386. https://doi.org/10.21577/1984-6835.20170021.
Pérez-Martínez, J. I., Morillo, E., Maqueda, C., & Ginés, J. M. (2001). Ethyl cellulose polymer microspheres for controlled release of norfluazon. Pest Management Science, 57(8), 688–694. https://doi.org/10.1002/ps.339.
Perez, J. J., & Francois, N. J. (2016). Chitosan-starch beads prepared by ionotropic gelation as potential matrices for controlled release of fertilizers. Carbohydrate Polymers, 148, 134–142. https://doi.org/10.1016/j.carbpol.2016.04.054.
Pethrick, R. A. (2004). Polymer physics. Michael Rubinstein and Ralph H Colby (Eds). Oxford University Press, Oxford, 2003.. ISBN 019852059X. pp 440. Polymer International, 53(9), 1394–1395. https://doi.org/10.1002/pi.1472.
Pourjavadi, A., Harzandi, A. M., & Hosseinzadeh, H. (2004). Modified carrageenan 3. Synthesis of a novel polysaccharide-based superabsorbent hydrogel via graft copolymerization of acrylic acid onto kappa-carrageenan in air. European Polymer Journal, 40(7), 1363–1370. https://doi.org/10.1016/j.eurpolymj.2004.02.016.
Puoci, F., Iemma, F., Spizzirri, U. G., Cirillo, G., Curcio, M., & Picci, N. (2008). Polymer in agriculture : A review. Review Literature And Arts Of The Americas, 3(1), 299–314.
Ramos Campos, E. V., de Oliveira, J. L., Fraceto, L. F., & Singh, B. (2014). Polysaccharides as safer release systems for agrochemicals. Agronomy for Sustainable Development, 35(1), 47–66. https://doi.org/10.1007/s13593-014-0263-0.
Ramos Campos, E. V., De Oliveira, J. L., Fernandes Fraceto, L., & Singh, B. (2015). Polysaccharides as safer release systems for agrochemicals (Vol. 35, pp. 47–66). https://doi.org/10.1007/s13593-014-0263-0.
Rashidzadeh, A., & Olad, A. (2014). Slow-released NPK fertilizer encapsulated by NaAlg-g-poly(AA-co-AAm)/MMT superabsorbent nanocomposite. Carbohydrate Polymers, 114, 269–278. https://doi.org/10.1016/j.carbpol.2014.08.010.
Rashidzadeh, A., Olad, A., Salari, D., & Reyhanitabar, A. (2014). On the preparation and swelling properties of hydrogel nanocomposite based on sodium alginate-g-poly (acrylic acid-co-acrylamide)/clinoptilolite and its application as slow release fertilizer. Journal of Polymer Research, 21, 344. https://doi.org/10.1007/s10965-013-0344-9.
Ray, D., Gils, P. S., Mohanta, G. P., Manavalan, R., & Sahoo, P. K. (2010). Comparative delivery of diltiazem hydrochloride through synthesized polymer: Hydrogel and hydrogel microspheres. Journal of Applied Polymer Science, 116(2), 959–968. https://doi.org/10.1002/app.31661.
Rinaudo, M. (2006). Chitin and chitosan: Properties and applications. Progress in Polymer Science, 31(7), 603–632. https://doi.org/10.1016/j.progpolymsci.2006.06.001.
Rohindra, D. R., Nand, A. V., & Khurma, J. R. (2004). Advances in Computation and Intelligence: 4th International Symposium on... Cai, Z., Li, Z., Kang, Z., Liu, Y. (Eds.). Springer.
Rudzinski, W. E., Dave, A. M., Vaishnav, U. H., Kumbar, S. G., Kulkarni, A. R., & Aminabhavi, T. M. (2002). Hydrogels as controlled release devices in agriculture, 5(1), 39–65. https://doi.org/10.1163/156855502760151580.
Sakai, S., & Kawakami, K. (2007). Synthesis and characterization of both ionically and enzymatically cross-linkable alginate. Acta Biomaterialia, 3(4), 495–501. https://doi.org/10.1016/j.actbio.2006.12.002.
Senna, A. M., & Botaro, V. R. (2017). Biodegradable hydrogel derived from cellulose acetate and EDTA as a reduction substrate of leaching NPK compound fertilizer and water retention in soil. Journal of Controlled Release, 260, 194–201. https://doi.org/10.1016/j.jconrel.2017.06.009.
Senna, A. M., Braga Do Carmo, J., Santana Da Silva, J. M., & Botaro, V. R. (2015). Synthesis, characterization and application of hydrogel derived from cellulose acetate as a substrate for slow-release NPK fertilizer and water retention in soil. Journal of Environmental Chemical Engineering, 3(2), 996–1002. https://doi.org/10.1016/j.jece.2015.03.008.
Shantha, K. L., & Harding, D. R. K. (2002). Synthesis and evaluation of sucrose-containing polymeric hydrogels for oral drug delivery. Journal of Applied Polymer Science, 84(14), 2597–2604. https://doi.org/10.1002/app.10378.
Sharma, R., Bajpai, J., Bajpai, A. K., Acharya, S., Shrivastava, R. B., & Shukla, S. K. (2014). Designing slow water-releasing alginate nanoreserviors for sustained irrigation in scanty rainfall areas. Carbohydrate Polymers, 102, 513–520. https://doi.org/10.1016/j.carbpol.2013.11.059.
dos Silva, M. S., Cocenza, D. S., Grillo, R., Silva de Melo, N. F., Tonello, P. S., de Oliveira, C., Lopes Cassimiro, C., Henrique, D., Rosa, A., & Fraceto, L. F. (2011). Paraquat-loaded alginate/chitosan nanoparticles: Preparation, characterization and soil sorption studies. Journal of Hazardous Materials, 190(1–3), 366–374. https://doi.org/10.1016/j.jhazmat.2011.03.057.
Singh, B., Sharma, D. K., Negi, S., & Dhiman, A. (2015). Synthesis and characterization of agar-starch based hydrogels for slow herbicide delivery applications. International Journal of Plastics Technology, 19(2), 263–274. https://doi.org/10.1007/s12588-015-9126-z.
Sopeña-Vázquez, F., Morillo, E., Villaverde, J., & Maqueda, C. (2008). Reduction of pesticide pollution in agricutural soils by using controlled release formulations: Efficacy and persistence studies. Fresenius Environmental Bulletin, 17(10 B), 1705–1710.
Sopeña, F., Cabrera, A., Maqueda, C., & Morillo, E. (2007). Ethylcellulose formulations for controlled release of the herbicide alachlor in a sandy soil. Journal of Agricultural and Food Chemistry, 55(20), 8200–8205. https://doi.org/10.1021/jf071459g.
Sopeña, F., Maqueda, C., & Morillo, E. (2009a). Controlled release formulations of herbicides based on micro-encapsulation. Ciencia e Investigación Agraria. scielocl.
Sopeña, F., Maqueda, C., & Morillo, E. (2009b). Formulation affecting alachlor efficacy and persistence in sandy soils. Pest Management Science, 65(7), 761–768. https://doi.org/10.1002/ps.1750.
Sopeña, F., Villaverde, J., Maqueda, C., & Morillo, E. (2011). Photostabilization of the herbicide norflurazon microencapsulated with ethylcellulose in the soil-water system. Journal of Hazardous Materials, 195, 298–305. https://doi.org/10.1016/j.jhazmat.2011.08.039.
Soppimath, K. S., Aminabhavi, T. M., Dave, A. M., Kumbar, S. G., & Rudzinski, W. E. (2002). Stimulus-responsive “smart” hydrogels as novel drug delivery systems. Drug Development and Industrial Pharmacy, 28(8), 957–974. https://doi.org/10.1081/ddc-120006428.
Tabata, Y. (2009). Biomaterial technology for tissue engineering applications. Journal of the Royal Society, Interface, 6(Suppl 3), S311–S324. https://doi.org/10.1098/rsif.2008.0448.focus.
Tanan, W., Panichpakdee, J., & Saengsuwan, S. (2018). Novel biodegradable hydrogel based on natural polymers : Synthesis, characterization, swelling / reswelling and biodegradability. European Polymer Journal, 112, 678–687. https://doi.org/10.1016/j.eurpolymj.2018.10.033.
Teodorescu, M., Lungu, A., Stanescu, P. O., & Neamt, C. (2009). Preparation and properties of novel slow-release NPK agrochemical formulations based on poly (acrylic acid) hydrogels and liquid fertilizers. Industrial & Engineering Chemistry Research, 48(14), 6527–6534. https://doi.org/10.1021/ie900254b.
Terao, K., Nagasawa, N., Nishida, H., Furusawa, K., Mori, Y., Yoshii, F., & Dobashi, T. (2003). Reagent-free crosslinking of aqueous gelatin: Manufacture and characteristics of gelatin gels irradiated with gamma-ray and electron beam. Journal of Biomaterials Science.. Polymer Edition, 14(11), 1197–1208.
Thombare, N., Mishra, S., Siddiqui, M. Z., Jha, U., Singh, D., & Mahajan, G. R. (2018). Design and development of guar gum based novel, superabsorbent and moisture retaining hydrogels for agricultural applications. Carbohydrate Polymers., 185, 169–178. https://doi.org/10.1016/j.carbpol.2018.01.018.
Vasilakoglou, I. B., & Eleftherohorinos, I. G. (2003). Persistence, efficacy, and selectivity of amide herbicides in corn. Weed Technology, 17(2), 381–388. https://doi.org/10.2307/3989325.
Vundavalli, R., Vundavalli, S., Nakka, M., & Rao, D. S. (2015). Biodegradable nano-hydrogels in agricultural farming - alternative source for water resources. Procedia Materials Science, 10, 548–554. https://doi.org/10.1016/j.mspro.2015.06.005.
Wang, T., Turhan, M., & Gunasekaran, S. (2004). Selected properties of pH-sensitive, biodegradable chitosan–poly(vinyl alcohol) hydrogel. Polymer International, 53(7), 911–918. https://doi.org/10.1002/pi.1461.
Wang, W., & Wang, A. (2010). Synthesis and swelling properties of pH-sensitive semi-IPN superabsorbent hydrogels based on sodium alginate-g-poly(sodium acrylate) and polyvinylpyrrolidone. Carbohydrate Polymers, 80(4), 1028–1036. https://doi.org/10.1016/j.carbpol.2010.01.020.
Wang, X.-L., Yang, K.-K., & Wang, Y.-Z. (2003). Properties of starch blends with biodegradable polymers. Journal of Macromolecular Science, Part C, 43(3), 385–409. https://doi.org/10.1081/mc-120023911.
Wu, Y., Zheng, Y., Yang, W., Wang, C., Hu, J., & Fu, S. (2005). Synthesis and characterization of a novel amphiphilic chitosan–polylactide graft copolymer. Carbohydrate Polymers, 59(2), 165–171. https://doi.org/10.1016/j.carbpol.2004.09.006.
Yegappan, R., Selvaprithiviraj, V., Amirthalingam, S., & Jayakumar, R. (2018). Carrageenan based hydrogels for drug delivery, tissue engineering and wound healing. Carbohydrate Polymers, 198, 385–400. https://doi.org/10.1016/j.carbpol.2018.06.086.
Zhu, Z., & Zhuo, R. (2000). Crosslinked quaternary ammonium cornstarch matrix for slow release of carboxylic groups-containing herbicides. Starch - Stärke, 52(2–3), 58–63. https://doi.org/10.1002/(sici)1521-379x(200004)52:2/3<58::aid-star58>3.0.co;2-3.
Acknowledgements
The authors would like to thank Agencia Nacional de Promoción Científica y Tecnológica (ANPCyT), Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET), and Universidad Nacional de Mar del Plata (UNMdP), Argentina. BT, CC and VAA are members of CONICET research staff.
Conflicts of Interest
The authors declare no conflict of interest.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this chapter
Cite this chapter
Tomadoni, B., Casalongué, C., Alvarez, V.A. (2019). Biopolymer-Based Hydrogels for Agriculture Applications: Swelling Behavior and Slow Release of Agrochemicals. In: Gutiérrez, T. (eds) Polymers for Agri-Food Applications . Springer, Cham. https://doi.org/10.1007/978-3-030-19416-1_7
Download citation
DOI: https://doi.org/10.1007/978-3-030-19416-1_7
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-19415-4
Online ISBN: 978-3-030-19416-1
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)