Abstract
Shielded wires and cables are used within electrical and electronic system to reduce electromagnetic interference (EMI) within a system. The interference of concern is capacitive and inductive coupling from wire to wire. The termination of the shields for both capacitive and inductive coupling is critical and fully discussed. Shielded cables are often used to tie subsystems together to form a large system. The level of shielding by these cables can vary significantly, where various methods used to design the shields are discussed. The methods used to terminate the shields to ground are presented. These methods include referencing the shields to ground with wires brought through the interface connector as well as the use of back shells and connectors. The advantage and disadvantage of referencing the back shells to the outside and inside of an electronic system are thoroughly discussed. Coaxial cables and their use are thoroughly presented. This includes the shielding to the E and H fields.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Reference
White DRJ (1973) Electromagnetic interference and compatibility, vol 3 (EMI Control Methods and Techniques). Don White Consultants Inc., Germantown, MD
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this chapter
Cite this chapter
Kunkel, G.M. (2020). Shielded Wires and Cables. In: Shielding of Electromagnetic Waves. Springer, Cham. https://doi.org/10.1007/978-3-030-19238-9_11
Download citation
DOI: https://doi.org/10.1007/978-3-030-19238-9_11
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-19237-2
Online ISBN: 978-3-030-19238-9
eBook Packages: EngineeringEngineering (R0)