Abstract
Aiming at the problem of multi-band motion and multi-joint inflection point of hybrid manipulator, the conventional trajectory prediction algorithm cannot satisfy the fast analysis and accurate control of motion trajectory. This paper proposes a hybrid manipulator running trajectory prediction algorithm based on PLC fuzzy control. Based on newton-andrews law, the dynamic model of hybrid manipulator was built, and the dynamics of hybrid manipulator was analyzed and the dynamic characteristics were determined. PLC fuzzy control unit is introduced, based on the kinematics characteristics of hybrid manipulator, the relevant input and output variables of PLC fuzzy control unit are determined, and the fuzzy strategy is implemented and analyzed. The construction of a hybrid manipulator based on fuzzy control is completed. The test data show that the proposed prediction algorithm is better than the conventional prediction algorithm, and the accuracy is improved by 57.42%, which is applicable to the prediction of the operation trajectory of the hybrid manipulator.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Zhou, Y., Hu, D., Jin, R., Hu, J.: Application of fuzzy control based on PLC in ship rudder roll stabilization system. Mod. Electron. Tech. 39(2), 140–142 (2016)
Wang, P., Hong, Y., Huang, H., et al.: Application of fuzzy PID controller based on PLC in hot air drying oven. Food Mach. 32(12), 100–104 (2016)
Xu, Q., Yang, S., Yang, M.: Offline robot track intelligent optimization—based on improved differential evolution algorithm. Agric. Mech. Res. 39(2), 191–195 (2017)
Huang, H., Zhang, G., Yang, Y.: Dynamic modeling and coordinate motion trajectory optimization for underwater vehicle and manipulator system. J. Shanghai Jiaotong Univ. 50(9), 1437–1443 (2016)
Feng, D., Zhang, X., Zhang, X., et al.: RANSAC-based spatial circle fitting algorithm and it’s application on motion range detection of a manipulator. Opt. Tech. 14(2), 156–160 (2016)
Xu, J., Mei, J., Duan, X., et al.: A continuous trajectory planning transition algorithm for industrial robots. Chin. J. Eng. Des. 23(6), 537–543 (2016)
Guo-zhen, B.A.I., Peng-xiang, J.I.N.G.: Trajectory planning of delta manipulators based on modified gravitational search algorithm. Control Eng. Chin. 24(9), 1823–1828 (2017)
Zhang, L., Wei, P., Li, P., Wang, X., Liu, X.: Fabric grasp planning for multi-fingered dexterous hand based on neural network algorithm. J. Text. Res. 38(1), 132–139 (2017)
Tong, Z., Guo, R., Li, L., Lin, Y.: Study on trajectory controlling of hydraulic sampling joint manipulator. Mach. Des. Manuf. 5(11), 162–165 (2016)
Huang, Z., Xiang, Y., Li, Z., Lu, N.: Trajectory planning and design of control system for road cone automatic retractable manipulator. Chin. J. Constr. Mach. 15(4), 283–290 (2017)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 ICST Institute for Computer Sciences, Social Informatics and Telecommunications Engineering
About this paper
Cite this paper
Chen, Y. (2019). Hybrid Manipulator Running Trajectory Prediction Algorithm Based on PLC Fuzzy Control. In: Liu, S., Yang, G. (eds) Advanced Hybrid Information Processing. ADHIP 2018. Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering, vol 279. Springer, Cham. https://doi.org/10.1007/978-3-030-19086-6_30
Download citation
DOI: https://doi.org/10.1007/978-3-030-19086-6_30
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-19085-9
Online ISBN: 978-3-030-19086-6
eBook Packages: Computer ScienceComputer Science (R0)