Abstract
Direct torque control and vector control are modern ways of controlling AC machines that allow an electric drive to achieve a very fast response. This paper deals with the method of direct torque control of an induction motor, which is called Direct Torque Control with Direct Calculation of Voltage Vector (DVC-DTC). The method is dependent on the setting of the coefficients referred to as k1 and k2, so the aim of this contribution is to show how their setting affects the behavior of a drive. A DSC-based implementation of this method has been developed using a modern control system with the TMS320F28335 digital signal controller from Texas Instruments. The first part of this paper includes a theoretical description of the method. The second part describes the courses of the most important quantities, which were measured for different settings of the weighting coefficients. The experimental results were obtained by measuring a real drive in laboratory conditions.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Notes
- 1.
I.e.: g2 has the opposite direction to the direction of the rotation of the stator flux vector \( \Psi _{1}^{\text{S}} \).
References
Vas, P.: Sensorless Vector and Direct Torque Control. Oxford University Press, New York (1998). ISBN 0198564651
Leonhard, W.: Control of Electrical Drives, 3rd edn. Springer, New York (2001). ISBN 3-540-41820-2
Takahashi, I., Noguchi, T.: A new quick-response and high-efficiency control strategy of an induction motor. IEEE Trans. Ind. Appl. IA-22(5), 820–827 (1986). https://doi.org/10.1109/tia.1986.4504799. ISSN 0093-9994
Baader, U., Depenbrock, M., Gierse, G.: Direct self control (DSC) of inverter-fed induction machine: a basis for speed control without speed measurement. IEEE Trans. Ind. Appl. 28(3), 581–588. https://doi.org/10.1109/28.137442. ISSN 00939994
Stando, D., Kazmierkowski, M.P.: Novel speed sensorless DTC-SVM scheme for induction motor drives. In: 2013 International Conference-Workshop Compatibility and Power Electronics, pp. 225–230. IEEE (2013). https://doi.org/10.1109/cpe.2013.6601159. ISBN 978-1-4673-4913-0
Sikorski, A., Korzeniewski, M.: Improved algorithms of Direct Torque Control method. Automatika 54(2), 188–198 (2017). https://doi.org/10.7305/automatika.54-2.173. ISSN 0005-1144
Metidji, B., Taib, N., Baghli, L., Rekioua, T., Bacha, S.: Low-cost Direct Torque Control algorithm for induction motor without AC phase current sensors. IEEE Trans. Power Electron. 27(9), 4132–4139 (2012). https://doi.org/10.1109/tpel.2012.2190101. ISSN 0885-8993
Brandstetter, P., Chlebis, P., Palacky, P.: Direct Torque Control of induction motor with direct calculation of voltage vector. Adv. Electr. Comput. Eng. 10(4), 17–22 (2010). https://doi.org/10.4316/aece.2010.04003. ISSN 1582-7445
Hrdina, L.: Direct Torque Control methods of induction motors. Ph.D. thesis. VSB - Technical University of Ostrava, Ostrava (2008)
Brandstetter, P., Kusyn, Q.: Induction motor drive with DSP-based control system. In: Proceedings of IEEE International Symposium on Industrial Electronics, pp. 163–167. IEEE (1996). https://doi.org/10.1109/isie.1996.548412. ISBN 0-7803-3334-9
Havel, A., Sobek, M., Chamrad, P.: Control methods of modern systems utilizing accumulation of electrical energy. In: 2017 18th International Scientific Conference on Electric Power Engineering (EPE), pp. 1–6. IEEE (2017). https://doi.org/10.1109/epe.2017.7967338. ISBN 978-1-5090-6406-9
Havel, A., Sobek, M., Palacky, P.: The measuring and control center for accumulation systems of electrical energy. Electr. Eng. 99(4), 1295–1303 (2017). https://doi.org/10.1007/s00202-017-0619-y. ISSN 0948-7921
Elrajoubi, A., Ang, S.S., Abushaiba, A.: TMS320F28335 DSP programming using MATLAB Simulink embedded coder: techniques and advancements. In: 2017 IEEE 18th Workshop on Control and Modeling for Power Electronics (COMPEL), pp. 1–7. IEEE (2017). https://doi.org/10.1109/compel.2017.8013418. ISBN 978-1-5090-5326-1
Talanov, M.V., Karasev, A.V., Talanov, V.M.: Implementation of extended Kalman filtering algorithm with improved flux estimator on TMS320F28335 processor for induction sensorless drive. In: 2014 6th European Embedded Design in Education and Research Conference (EDERC), pp. 119–123. IEEE (2014). https://doi.org/10.1109/ederc.2014.6924371. ISBN 978-1-4799-6843-5
Acknowledgement
This paper was supported by the projects: Center for Intelligent Drives and Advanced Machine Control (CIDAM) project, Reg. No. TE02000103, funded by the Technology Agency of the Czech Republic and Project Reg. No. SP2018/162 funded by the Student Grant Competition of VSB – Technical University of Ostrava.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Appendix – Meaning of Symbols
Appendix – Meaning of Symbols
Symbol | Unit | Description |
---|---|---|
T ref | Nm | Torque reference |
T | Nm | Torque (calculated) |
i 1α | A | Stator current (phase a) |
u 1α | V | Stator voltage (phase a) |
Ψref | Wb | Reference of the modulus of stator flux vector (the same as \( \left| {\Psi {}_{1}^{\text{S}} } \right|_{\text{ref}} \)) |
Ψ1α | Wb | α-component of stator flux vector (calculated) |
Ψ1β | Wb | β-component of stator flux vector (calculated) |
f sa | Hz | Sampling frequency (frequency of control loop execution) |
f sw | Hz | Switching frequency |
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Baca, J., Kuchar, M., Palacky, P. (2020). Effect of Weighting Coefficients on Behavior of the DTC Method with Direct Calculation of Voltage Vector. In: Zelinka, I., Brandstetter, P., Trong Dao, T., Hoang Duy, V., Kim, S. (eds) AETA 2018 - Recent Advances in Electrical Engineering and Related Sciences: Theory and Application. AETA 2018. Lecture Notes in Electrical Engineering, vol 554. Springer, Cham. https://doi.org/10.1007/978-3-030-14907-9_66
Download citation
DOI: https://doi.org/10.1007/978-3-030-14907-9_66
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-14906-2
Online ISBN: 978-3-030-14907-9
eBook Packages: EngineeringEngineering (R0)