Abstract
A quantitative analysis on the casting defects is of great necessity to further improve the mechanical properties of high-performance alloys, in particular dynamic fatigue properties. Computed tomography (CT) is frequently utilized to determine the casting defects of casting parts and thereby evaluate their casting qualities. In this contribution, one Mg casting part (AZ91D, Mg–9Al–1Zn) produced by thixomolding was investigated by computed tomography . No significant casting defect was observed, strongly indicating that thixomolding could produce high-quality Mg casting parts. Furthermore, newly developed reconstruction software developed in Austria (VrVia GmbH) was used to obtain more details from the same casting part. This investigation demonstrates that computed tomography is an efficient method to determine casting defects in near-net-shape casting parts.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Rosc J, Pabel T, Geier GF, Schumacher P (2010) Method for the estimation of porosity analysis of CT-data. Giesserei-rundschau 57:244–246
Li JH, Oberdorfer B, Habe D, Schumacher P (2018) Determining casting defects in near-net shape casting aluminum parts by computed tomography. Front Mech Eng 13(1):48–52
Li JH, Ludwig TH, Oberdorfer B, Schumacher P (2018) Solidification behaviour of Al Si based alloys with controlled additions of Eu and P. Int J Cast Met Res 31:319–331
Mayo SC, Stevenson AW, Wilkins SW (2012) In-line phase-contrast X-ray imaging and tomography for materials science. Materials 5:937–965
Withers PJ (2015) Fracture mechanics by three-dimensional crack-tip synchrotron X-ray microscopy. Phil Trans R Soc A 373:20130157
Samavedam S, Sakri SB, Hanumantha RD, Sundarrajan S (2014) Estimation of porosity and shrinkage in a cast eutectic Al-Si alloy. Can Metall Q 53:55–64
Nicoletto G, Konečná R, Fintova S (2012) Characterization of microshrinkage casting defects of Al-Si alloys by X-ray computed tomography and metallography. Int J Fatigue 41:39–46
Cabeza S, Mishurova T, Garcés G, Sevostianov I, Requena G, Bruno G (2017) Stress-induced damage evolution in cast AlSi12CuMgNi alloy with one- and two-ceramic reinforcements. J Mater Sci 52:10198–10216
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 The Minerals, Metals & Materials Society
About this paper
Cite this paper
Li, J., Oberdorfer, B., Schumacher, P. (2019). Determining Casting Defects in Thixomolding Mg Casting Part by Computed Tomography. In: Tiryakioğlu, M., Griffiths, W., Jolly, M. (eds) Shape Casting. The Minerals, Metals & Materials Series. Springer, Cham. https://doi.org/10.1007/978-3-030-06034-3_9
Download citation
DOI: https://doi.org/10.1007/978-3-030-06034-3_9
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-06033-6
Online ISBN: 978-3-030-06034-3
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)