Abstract
This chapter presents an experimental investigation of the metal cutting tribology with the purpose of re-examining the role of oxygen in the process mechanics and obtaining a better understanding of the friction coefficient in terms of the major process parameters. Specially designed apparatus and tribological tools have been used to cut pure metals and metallic engineering materials under oxygen-rich surrounding medium. Friction coefficient has been evaluated, and the chip–tool interface has been observed in situ using optical microscopy. It has been shown that pressure-welded junctions occur near the point at which chip detaches from cutting tool , and it has been established that there is an intimate relation between the oxide films formation and the oxygen concentration in the surrounding medium. The chip curl, sticking and sliding zones were seen to change with oxygen concentration. It can be asserted that friction plays an important role in the free plastic flow of metal cutting due to the high friction coefficient values ranging from 0.3 to 1, or even higher. However, the main research contribution of this study is the remark of the friction coefficient as a function of the process parameters, rather than a constant numeric value representing complex phenomena at the contact interface between the chip and the cutting tool.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Abdelali H, Courbon C, Rech J, Salem W, Dogui A, Kapsa P (2011) Identification of a friction model at the tool-chip-workpiece interface in dry machining of a AISI 1045 steel with a TiN coated carbide tool. J Tribol 133(4):1115–1127
Bailey JA (1975) Friction in metal machining-mechanical aspects. Wear 31(2):243–275
Bagchi A, Wright PK (1987) Stress analysis in machining with the use of sapphire tools. Proc R Soc A 409:90–113
Batra IP, Kleinman L (1984) Chemisorption of oxygen on aluminum surfaces. J Electron Spectrosc Relat Phenom 33:175–241
Bonnet C, Valiorgue F, Rech J, Claudin C, Hamdi H, Bergheau JM, Gilles P (2008) Identification of a friction model—application to the context of dry cutting of an AISI 316L austenitic stainless steel with a TiN Coated Carbide Tool. Int J Mach Tools Manuf 48:1211–1223
Brinksmeier E, Lucca DA, Walter A (2004) Chemical aspects of machining processes. CIRP Ann Manuf Technol 53:685–699
Challen JM, Oxley PLB (1975) An explanation of the different regimes of friction and wear using asperities deformation models. Wear 53:229–243
Chandrasekaran H, Kapoor DV (1965) Photoelastic analysis of tool-chip interface stresses. J Eng Ind 87:495
Chien K (1953) Influence of tool sharpness on the mechanics of metal cutting. Ph.D., thesis, Massachusetts Institute of Technology
Cristino VAM, Rosa PAR, Martins PAF (2010) Cutting under active and inert gas shields: a contribution to the mechanics of chip flow. Int J Mach Tools Manuf 50:892–900
Cristino VAM, Rosa PAR, Martins PAF (2010) The utilisation of pin-on-disc simulative tests for the calibration of friction in mechanical processing of materials. Int J Surf Sci Eng 224(2):169–177
Cristino VAM, Rosa PAR, Martins PAF (2011) Surface roughness and material strength of tribo-pairs in ring compression tests. Tribol Int 44(2):134–143
Cristino VAM, Rosa PAR, Martins PAF (2012) Revisiting the calibration of friction in metal cutting. Tribol Trans 55:652–664
Dautzenberg JH, Veenstra PC, Van der Wolf ACH (1981) The minimum energy principle for the cutting process in theory and experiment. CIRP Ann Manuf Technol 30(1):1–4
De Chiffre L (1977) Mechanics of metal cutting and cutting fluid action. Int J Mach Tool Des Res 17(4):225–234
Dejun K, Jinchun W, Hao L (2016) Friction and wear performances of 7475 aluminium alloy after anodic oxidation. Rare Met Mater Eng 45:1122–1127
Denkena B, Biermann D (2014) Cutting edge geometries. CIRP Ann Manuf Technol 63:631–653
Doyle ED, Horne JG, Tabor D (1979) Frictional interactions between chip and rake face in continuous chip formation. Proc R Soc A 366:173–187
Egana A, Rech J, Arrazola PJ (2012) Characterization of friction and heat partition coefficients during machining of a TiAl6V4 titanium alloy and a cemented carbide. Tribol Trans 16:189–204
Enahoro HE, Oxley PLB (1966) Flow along the chip-tool interface in orthogonal metal cutting. J Mech Eng Sci 8:36–41
Endrino JL, Fox-Rabinovich GS, Reiter A, Veldhuis SV, Escobar RG, Albella JM, Marco JF (2007) Oxidation tuning in AlCrN coatings. Surf Coat Technol 201(8):4505–4511
Ernst H, Merchant ME (1941) Chip formation, friction and high quality machined surfaces. Surface treatment of metals. Trans Am Soc Metals 29:299–335
Finnie I, Shaw MC (1956) Friction process in metal cutting. Am Soc Mech Eng 77:1649–1657
Gane N, Pfaelzer PF, Tabor D (1974) Adhesion between clean surfaces at light loads. Proc R Soc Ser A340:495–517
Grzesik W, Zalisz Z, Nieslony P (2002) Friction and wear testing of multilayer coatings on carbide substrates for dry machining applications. Surf Coat Technol 155:37–45
Han N, Shui L, Lui WM, Xue QJ, Sun YS (2002) Study of the lubrication mechanism of olefin sulfide. Tribology 22:49–53
Hedenqvist P, Olsson M (1991) Sliding wear testing of coated cutting tool materials. Tribol Int 24:143–150
Horne JG, Doyle ED, Tabor D (1977) Direct observation of chip-tool interface in metal cutting. In: Proceedings of the fifth north American metalworking research conference, SME, Amherst, MA, pp 237–241
Huang S, Wang Z, Yao W, Xu X (2015) Tribological evaluation of contact-charged electrostatic spray lubrication as a new near-dry machining technique. Tribol Int 91:74–84
Iraola J, Rech J, Valiorgue F, Arrazola P (2012) Characterization of friction coefficient and heat partition coefficient between an austenitic steel AISI 304L and a TiN coated carbide cutting tool. Mach Sci Technol 16:189–204
Kajdas C (2005) Importance of the tribo emission process for tribo chemical reaction. Tribol Int 38:337–353
Kattwinkel W (1957) Experimentation of cutting action by means of photoelasticity. Ind Anzeig 36:525
Klimenko SA, Kopeikina MY, Tanovic L (2003) Wear of superhard cutting tools. FME Trans 31:1–6
Krishtal MA, Borgardt AA, Yashin YD (1977) Effect of lead on the machinability of free-cutting steel. Met Sci Heat Treat 19(3):178–180
Kuhlmann-Wilsdorf D (1996) What role for contact spots and dislocations in friction and wear? Wear 200:8–29
Lee EH, Shaffer BW (1951) The theory of plasticity applied to a problem of machining. J Appl Mech 73:405–413
Li B (2011) Chip morphology of normalized steel when machining in different atmospheres with ceramic composite tool. Int J Refract Metal Hard Mater 29(3):384–391
Lorentzon J, Järvstråt N, Josefson BL (2009) Modelling chip formation of alloy 718. J Mater Process Technol 209(10):4645–4653
Madhavan V, Chandrasekar S, Farris TN (2002) Direct observations of the chip-tool interface in the low speed cutting of pure metals. J Tribol 124:617–626
Masuko M (1953) Fundamental research on metal cutting process. II. Plasticity conditions in orthogonal cutting. J Appl Phys 19:32–39
Mia M, Singh G, Gupta M, Sharma V (2018) Influence of Ranque-Hilsch vortex tube and nitrogen gas assisted MQL in precision turning of Al 6061-T6. Precis Eng 53:289–299
Osama M, Singh A, Walvekar R, Khalid M, Gupta T, Yin W (2017) Recent developments and performance review of metal working fluids. Tribol Int 114:389–401
Ozel T (2006) The influence of friction models on finite element simulations of machining. Int J Mach Tools Manuf 46:518–530
Pepper S (1979) Effect of interfacial species on shear strength of metal-sapphire contacts. J Appl Phys 50:8062–8066
Popov A, Dugin A (2013) A comparison of experimental estimation methods of the ploughing force in orthogonal cutting. Int J Mach Tools Manuf 65:37–40
Puls H, Klocke F, Lung D (2012) A new experimental methodology to analyse the friction behaviour at the tool-chip interface in metal cutting. Prod Eng Res Devel 6:349–354
Rech J, Arrazola PJ, Claudin C, Courbon C, Pusavec F, Kopac J (2013) Characterisation of friction and heat partition coefficients at the tool-work material interface in cutting. CIRP Ann Manuf Technol 62(1):78–82
Rogante M (2009) Wear characterisation and tool performance of sintered carbide inserts during automatic machining of AISI 1045. J Mater Process Technol 209:4776–4783
Schey JA (1983) Tribology in metalworking: friction, lubrication and wear. American Society for Metals, Materials Park
Sedlacek M, Podgornik B, Vizintin J (2009) Influence of surface preparation on roughness parameters, friction and wear. Wear 266:482–487
Shaw MC (1984) Metal cutting principles. Oxford series on advanced manufacturing
Shimada S, Inamura T, Higuchi M, Tanaka H, Ikawa N (2000) Suppression of tool wear in diamond turning of copper under reduced oxygen atmosphere. CIRP Ann Manuf Technol 49(1):21–24
Silva CMA, Rosa PAR, Martins PAF (2009) An innovative electromagnetic compressive split Hopkinson bar. Int J Mech Mater Des 5:281–288
Smolenicki D, Boos J, Kuster F, Roelofs H, Wyen CF (2014) In-process measurement of friction coefficient in orthogonal cutting. CIRP Ann Manuf Technol 63:97–100
Soufiani AM, Karimzadeh F, Enayati MH, Soufiani AM (2012) The effect of type of atmospheric gas on milling behavior of nanostructured Ti6Al4V alloy. Adv Powder Technol 23:264–267
Stanford M, Lister P, Kibble KA (2007) Investigation into the effect of cutting environment on tool life during the milling of a BS970-080A15 (En32b) low carbon steel. Wear 262:1496–1503
Suda S, Yokota H, Inasaki I, Wakabayashi T (2002) A synthetic ester as an optimal cutting fluid for minimal quantity lubrication machining. CIRP Ann Manuf Technol 51:95–98
Sumitomo T, Aizawa T, Yamamoto S (2005) In-situ formation of self-lubricating tribo-films for dry machinability. Surf Coat Technol 200(5–6):1797–1803
Svahn F, Kassaman-Rudolphi A, Wallen E (2003) The influence of surface roughness on friction and wear of machine element coatings. Wear 254:1092–1098
Tabor D (1981) Friction—the present state of our understanding. J Lubr Technol 103:169–179
Trent EM (1967) Conditions of seizure at the chip-tool interface. Mach ISI Spec Rep 94:11
Usui E, Takeyama H (1960) Photoelastic analysis of machining stresses. J Eng Ind 82:303–308
Veldhuisa SC, Dosbaevaa GK, Yamamoto K (2009) Tribological compatibility and improvement of machining productivity and surface integrity. Tribol Int 42(6):1004–1010
Wakabayashi T, Inasaki I, Suda S, Yokota H (2003) Tribological characteristics and cutting performance of lubricant esters for semi-dry machining. CIRP Ann Manuf Technol 52:61–64
Wallace PW, Boothroyd G (1964) Tool forces and tool chip friction in orthogonal machining. J Mech Eng Sci 6:74
Williams JA, Tabor D (1977) The role of lubricants in machining. Wear 43:275–292
Wright PK, Trent EM (1974) Metallurgical appraisal of wear mechanisms and processes on high speed tools. Metall Res Technol 1(1):13–23
Wright PK, Horne JG, Tabor D (1979) Boundary conditions at the chip-tool interface in machining: comparisons between seizure and sliding friction. Wear 54:371–390
Wright PK (1981) Frictional interactions in machining: comparisons between transparent sapphire and steel cutting tools. Metall Res Technol 8(4):150–160
Yamane Y, Narutaki N, Hayashi K (1996) Suppression of tool wear by using an inert gas in face milling. J Mater Process Technol 62:380–383
Zemzemi F, Rech J, Salem BBW, Kapsa P, Dogui A (2007) Development of a friction model for the tool–chip–workpiece interface during dry machining of AISI 4142 steel with TiN coated carbide cutting tools. Int J Mach Mach Mater 2:361–367
Zhang S, Guo YB (2009) An experimental and analytical analysis on chip morphology, phase transformation, oxidation, and their relationships in finish hard milling. Int J Mach Tools Manuf 49(11):805–813
Zhukovskii YF, Jacobs PWM, Causá M (2003) On the mechanism of the interaction between oxygen and close-packed single-crystal aluminum surfaces. J Phys Chem Solids 64(8):1317–1331
Zorev NN (1958) Results of work in the field of the mechanics of the metal cutting process. Proc Inst Mech Eng, Part B: J Eng Manuf 255
Acknowledgements
The authors would like to acknowledge the support provided by IDMEC under LAETA-UID/EMS/50022/2013.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this chapter
Cite this chapter
Rosa, P.A.R., Gregorio, A.V.L., Paulo Davim, J. (2019). The Role of Oxygen in Orthogonal Machining of Metals. In: Davim, J. (eds) Measurement in Machining and Tribology. Materials Forming, Machining and Tribology. Springer, Cham. https://doi.org/10.1007/978-3-030-03822-9_2
Download citation
DOI: https://doi.org/10.1007/978-3-030-03822-9_2
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-03821-2
Online ISBN: 978-3-030-03822-9
eBook Packages: EngineeringEngineering (R0)