Abstract
Aluminum and its alloys are frequently used in industry due to their low density as well as their high strength and corrosion resistance. Although the most common welding methods for aluminum are TIG, MIG, and plasma, due to the high temperatures during welding, the metallurgical precipitates formed in the heat affected zone disrupt the interior and affect the mechanical properties negatively. Friction welding of tube to tube plate using an external tool (FWTPET) which is a fairly new method has been developed to overcome this shortcoming and tube to tube plate welding has started to be made with this method. In this study, aluminum alloy AA6063 tubes were successfully joined to AA6082 plate by FWTPET. The welding groove on the plate, the gap between the tube and the plate, and the tube projection length were studied experimentally. The effects of all parameters on shear strength, micro hardness, and the formation of internal structure of the weld zone were investigated, as a result the optimum welding parameters are founded.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Kumaran, S.S., Muthukumaran, S., Chandrasekhar, R.C.: Effect of tube preparations on joint strength in friction welding of tube to tube plate using an external tool process. Exp. Tech. 37(3), 24–32 (2013)
Rajan, S.P., Kumaran, S.S., Kumaraswamidhas, L.A.: An investigation on SA 213 tube to SA 387 tube plate with backing block arrangement in friction welding process. Alex. Eng. J. 55(2), 1255–1269 (2016)
Kumaran, S.S., Das, A.D.: Friction welding joints of SA 213 Tube to SA 387 tube plate boiler grade materials by using clearance and ınterference fit method. Mater. Today Proc. 5(2), 8557–8566 (2018)
Kumar, C.V., Muthukumaran, S., Pradeep, A., Kumaran, S.S.: Optimizational study of friction welding of steel tube to aluminum tube plate using an external tool process. Int. J. Mech. Mater. Eng. 6(2), 300–306 (2011)
Kumaran, S.S., Muthukumaran, S., Vinodh, S.: Optimization of friction welding of tube to tube plate using an external tool. Struct. Multidiscip. Optim. 42(3), 449–457 (2010)
Kumaran, S.S., Muthukumaran, S., Vinodh, S.: Optimization of friction welding of tube to tube plate using an external tool by hybrid approach. J. Alloy. Compd. 509(6), 2758–2769 (2011)
Kumaran, S.S., Muthukumaran, S., Vinodh, S.: Optimization of friction welding of tube-to-tube plate using an external tool by Taguchi method and genetic algorithm. Int. J. Adv. Manuf. Technol. 57(1–4), 167 (2011)
Kumaran, S.S., Muthukumaran, S.: Effect of projection on joint properties of friction welding of tube-to-tube plate using an external tool. Int. J. Adv. Manuf. Technol. 75(9–12), 1723–1733 (2014)
Kumaran, S.S., Muthukumaran, S., Venkateswarlu, D., Balaji, G.K., Vinodh, S.: Eco-friendly aspects associated with friction welding of tube-to-tube plate using an external tool process. Int. J. Sustain. Eng. 5(2), 120–127 (2012)
Kumaran, S.S., Das, A.D.: An Examination of seamless ferritic tube and austenitic alloy tube plate joining by friction welding process. Mater. Today Proc. 5(2), 8539–8546 (2018)
KaruppannaRaja, P.G., Rajkumar, M.: A study on backing block arrangement of dissimilar metal joining process of seamless ferritic and austenitic alloy by using an external tool. J. Alloy. Compd. 687, 773–785 (2016)
Rajan, S.P., Kumaraswamidhas, L.A.: An investigation on thermal and friction effect produced by friction welding of SA 213 tube to SA 387 tube plate. Alex. Eng. J. 55(1), 101–112 (2016)
Pandiarajan, S., Kumaran, S.S., Kumaraswamidhas, L.A., Saravanan, R.: Interfacial microstructure and optimization of friction welding by Taguchi and ANOVA method on SA 213 tube to SA 387 tube plate without backing block using an external tool. J. Alloy. Compd. 654, 534–545 (2016)
Kumaran, S.S., Muthukumaran, S., Chandrasekhar, R.C.: Suitability of friction welding of tube to tube plate using an external tool process for different tube diameters—a study. Exp. Tech. 37(6), 8–14 (2013)
Kumaran, S.S., Das, A.D.: An investigation of Boiler Grade Tube and Tube Plate without block by using friction welding process. Mater. Today Proc. (5)2, 8567–8576 (2018)
Rajan, S.P., Kumaran, S.S., Kumaraswamidhas, L.A.: An investigation of metal flow during friction welding of SA 213 tube to SA 387 tube plate with backing block. Alex. Eng. J. 55(2), 1187–1199 (2016)
Meran, C., Korkmaz, E., Küçükömeroğlu, T., Aksoy, M.A., Kestel, M., Akder, İ.: Boruların plakalara dışarıdan bir takımla sürtünme kaynak edilebilirliğinin incelenmesi. IX. Ulusal Kaynak Teknolojileri Kongre ve Sergisi, Ankara. s471–480 (2015)
Meran, C., Korkmaz, E., Aykanat, E., Degirmenci, S.: EN AW 6063 alüminyum alaşımı boruların plakalara dıştan bir takım yardımıyla sürtünme kaynağı yapılabilirliğinin incelenmesi. 4. Uluslararası Kaynak Teknolojileri Konferansı ve Sergisi Gaziantep 145–156 (2016)
Korkmaz, E.: Examination of the friction welding of aluminum alloy tube-plates using an external tool. MSC Thesis, Pamukkale University Institute of Science, Denizli, Türkiye (2017)
Muthukumaran, S., Kumaran, S.S., Kumar, S.: Friction welding of Cu-tube to Al-tube plate using an external tool. Trans. Indian Inst. Met. 64(3), 255–260 (2011)
Küçükömeroğlu, T., Meran, C.: Takım baskı kuvveti kontrollü sürtünme karıştırma kaynağı. In: 13th International Materials Symposium Denizli 1345–1349 (2010)
Korkmaz, E., Gülsöz, A., Meran, C.: Investigations on the joint properties of the friction welding of aluminium alloy tube to tube plate using an external tool. J. Achieve. Mater. Manuf. Eng. 81(2) (2017)
Kannan, S., Kumaran, S.S., Kumaraswamidhas, L.A.: An investigation on mechanical property of commercial copper tube to aluminium 2025 tube plate by FWTPET process. J. Alloy. Compd. 672, 674–688 (2016)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this chapter
Cite this chapter
Korkmaz, E., Gülsöz, A., Meran, C. (2019). The Friction Weldability of AA6063 Tube to AA6082 Tube Plates Using an External Tool. In: Silva, L. (eds) Materials Design and Applications II. Advanced Structured Materials, vol 98. Springer, Cham. https://doi.org/10.1007/978-3-030-02257-0_29
Download citation
DOI: https://doi.org/10.1007/978-3-030-02257-0_29
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-02256-3
Online ISBN: 978-3-030-02257-0
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)