Abstract
This paper demonstrates the widely accepted hypothesis that the compressive testing is a particular case of a cyclic test where failure occurs during the first cycle. To perform this, a test on 32 fiber-reinforced high-performance concrete specimens have been carried out. Sixteen of them have been tested under low-cycle fatigue compressive loading up to failure. Eight of them have been tested under monotonic compressive loading, until failure too. And the last eight specimens have remained intact. All of them have been scanned using a Computed Tomography (CT) Scan in order to define the pattern of their damage, which includes voids and cracks. The results show that the average damage maps of monotonic and fatigue series are statistically identical, which confirms the hypothesis previously described. In addition, both series are different to the intact series, which means that not a random damage distribution occurs when specimens collapse.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Aas-Jackobsen, K.: Fatigue of concrete beams and columns. Ph.D. thesis, University of Trondheim (1970)
Bordelon, A.C., Roesler, J.R.: Spatial distribution of synthetic fibers in concrete with x-ray computed tomography. Cement Concr. Compos. 53, 35–43 (2014). https://doi.org/10.1016/j.cemconcomp.2014.04.007
Herrmann, H., Pastorelli, E., Kallonen, A., Suuronen, J.P.: Methods for fibre orientation analysis of x-ray tomography images of steel fibre reinforced concrete (SFRC). J. Mater. Sci. 51(8), 3772–3783 (2016). https://doi.org/10.1007/s10853-015-9695-4
Hsu, T.: J. Am. Concr. Inst. 78(4), 192–305 (1981)
Oesch, T.S., Landis, E.N., Kuchma, D.A.: Conventional concrete and UHPC performance–damage relationships identified using computed tomography. J. Eng. Mech. 142(12), 04016101 (2016)
Pastorelli, E., Herrmann, H.: Virtual reality visualization for short fibre orientation analysis. In: 2014 14th Biennial Baltic Electronic Conference (BEC), pp. 201–204 (2014). https://doi.org/10.1109/BEC.2014.7320591
Petkovic, G., Lenschow, R., Stemland, H., Rosseland, S.: Fatigue of high strength concrete. ACI Spec. Publ. 121(25), 505–525 (1990)
Pittino, G., Geier, G., Fritz, L., Hadwiger, M., Rosc, J., Pabel, T.: Computertomografische untersuchung von stahlfaserspritzbeton mit mehrdimensionalen transferfunktionen. Beton- und Stahlbetonbau 106(6), 364–370 (2011). https://doi.org/10.1002/best.201100009
Ponikiewski, T., Katzer, J., Bugdol, M., Rudzki, M.: Steel fibre spacing in self-compacting concrete precast walls by x-ray computed tomography. Mater. Struct. 48(12), 3863–3874 (2015a). https://doi.org/10.1617/s11527-014-0444-y
Ponikiewski, T., Katzer, J., Bugdol, M., Rudzki, M.: X-ray computed tomography harnessed to determine 3D spacing of steel fibres in self compacting concrete (SCC) slabs. Constr. Build. Mater. 74, 102–108 (2015b). https://doi.org/10.1016/j.conbuildmat.2014.10.024
Przybilla, C., Fernández-Cantelli, A., Castillo, E.: Deriving the primary cumulative distributive function of fracture stress for brittle materials from 3- and 4-point bending tests. J. Eur. Ceram. Soc. 31, 451–460 (2011)
Saucedo, L., Yu, R., Medeiros, A., Zhang, X., Ruiz, G.: A probabilistic fatigue model based on the initial distribution to consider frequency effect in plain and fiber reinforced concrete. Int. J. Fatigue 48, 308–318 (2013)
Schnell, J., Schladitz, K., Schuler, F.: Richtungsanalyse von fasern in betonen auf basis der computer-tomographie. Beton- und Stahlbetonbau 105(2), 72–77 (2010). https://doi.org/10.1002/best.200900055
Suuronen, J.P., Kallonen, A., Eik, M., Puttonen, J., Serimaa, R., Herrmann, H.: Analysis of short fibres orientation in steel fibre reinforced concrete (SFRC) using x-ray tomography. J. Mater. Sci. 48(3), 1358–1367 (2013). https://doi.org/10.1007/s10853-012-6882-4
Tepfers, R., Kutti, T.: Fatigue strength of plain, ordinary and lightweight concrete. J. Am. Concr. Inst. 76(5), 635–652 (1979)
Vicente, M., Minguez, J., González, D.: The use of computed tomography to explore the microstructure of materials in civil engineering: from rocks to concrete. In: Halefoglu, D.A.M. (ed.) Computed Tomography-Advanced Applications. InTech (2017). https://doi.org/10.5772/intechopen.69245
Vicente, M.A., González, D.C., Mínguez, J.: Determination of dominant fibre orientations in fibre-reinforced high-strength concrete elements based on computed tomography scans. Nondestruct. Test. Eval. 29(2), 164–182 (2014). https://doi.org/10.1080/10589759.2014.914204
Zhang, B., Phillips, D., Wu, K.: Effects of loading frequency and stress reversal on fatigue life of plain concrete. Mag. Concr. Res. 48(4), 292–305 (1996)
Zhao, D., Chang, Q., Yang, J., Song, Y.: A new model for fatigue life distribution of concrete. Key Eng. Mater. 348–349, 201–204 (2007)
Acknowledgements
The authors are grateful for the financial support from the Ministerio de Economía y Competitividad BIA2015-686678-C2-R, Spain, Junta de Comunidades de Castilla – La Mancha, Spain, Fondo Europeo de Desarrollo Regional, gran PEII-2014-016-P and INCRECYT Program.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this chapter
Cite this chapter
Vicente, M.A., Ruiz, G., González, D.C., Mínguez, J., Tarifa, M., Zhang, X. (2019). Study of Crack Patterns of Fiber-Reinforced Concrete (FRC) Specimens Subjected to Static and Fatigue Testings Using CT-Scan Technology. In: Herrmann, H., Schnell, J. (eds) Short Fibre Reinforced Cementitious Composites and Ceramics. Advanced Structured Materials, vol 95. Springer, Cham. https://doi.org/10.1007/978-3-030-00868-0_1
Download citation
DOI: https://doi.org/10.1007/978-3-030-00868-0_1
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-00867-3
Online ISBN: 978-3-030-00868-0
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)