Abstract
To overcome the restrictions on electric vehicles ranges on winter term conditions, due to the heating demand of the interior, the use of a Thermal High Performance Storage with metallic Phase Change Materials is one possible solution. A new storage concept, using a so called Heat Transport System, enabling the heat transfer from the storage to a vehicles cooling fluid by evaporation and condensation of a working fluid within a closed circle, is introduced in this study. The influence of the storage on an electric vehicles range is exemplary shown for DLR’s Urban Modular Vehicle Concept for a motorway cycle by theoretical investigations. An increase of range by 36,3 km resp. 18,4% for an ambient temperature of –10 °C and 46 km resp. 26,7% for an ambient temperature of –20 °C could be reached. The energy densities of the designed storages reach values of more than 220 Wh/kg resp. more than 310 Wh/l. The cost estimations for those storage systems are approx. 445 € resp. 660 €. A comparison between the thermal energy storage and a conventional heating system consisting out of a PTC-Heater and a battery show, that the conventional heating system has a mass which is about two thirds higher, a volume which is more than one third higher and a quadrupled price compared to the thermal energy storage.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Kuper, C., Hoh, M., Houchin-Miller, G., Fuhr, J.: Thermal management of hybrid vehicle battery systems. In: EVS, vol. 24, Stavanger, Norway (2009)
Jung, M., Kemle, A., Strauss, T., Wawzyniak, M.: Innenraumheizung von Hybrid- und Elektrofahrzeugen, ATZ, pp. 396–401, May 2011
Pischinger, S., Genender, P., Klopstein, S., Hemkemeyer, D.: Aufgaben beim Thermomanagement von Hybrid- und Elektrofahrzeugen, ATZ, pp. 54–59, April 2014
Grossmann, H.: Pkw – Klimatisierung – Physikalische Grundlagen und technische Umsetzung. Springer, Heidelberg (2013)
Kraft, W., Altstedde, M.K.: Use of metallic Phase Change Materials (mPCM) for heat storage in electric- and hybrid vehicles. In: The 6th Hybrid and Electric Vehicle Conference, London, (2016)
Altstedde, M.K., Kraft, W.: Thermohybrid heat storage systems. In: 1st ETA Conference - Energy and Thermal Management, Air Conditioning, Waste Heat Recovery, Berlin, (2016)
Altstedde, M.K., Kraft, W.: Metallische Latentwärmespeicher - Der innovative Energiespeicher für die Elektromobilität. In: 4. VDI Fachkonferenz - Thermomanagement für elektromotorisch angetriebene PKW, Stuttgart (2015)
Kraft, W., Altstedde, M.K., Yildirim, K.-E., Kainz, T.: DuoTherm - Ein neuartiges thermisches Energiespeichersystem am Beispiel batterieelektrischer Stadtbusse. In: VDI Wissensforum - Thermomanagement in elektromotorische angetriebenen PKW, Leinfelden-Echterdingen (2017)
Altstedde, M.K., Kraft, W.: DuoTherm - a novel thermal energy storage system for the usage in electric and hybrid vehicles. In: SAE 2017 Thermal Management Systems Symposium, Plymouth, Michigan (2017)
Forschungsvereinigung Automobiltechnik (FAT), “Klimatische Daten und PKW-Nutzung - Klimadaten und Nutzungsverhalten zu Auslegung, Versuch und Simulation an Kraftfahrzeug-Kälte-/ Heizanlagen in Europa, USA, China und Indien,” VDA - Verband der Automobilindustrie, Frankfurt (2009)
Geringer, B., Tober, W.: “Batterieelektrische Fahrzeuge in der Praxis,” Österreichischer Verein für Kraftfahrzeugtechnik - ÖKV, Wien (2012)
Münster, M., Schäffer, M., Kopp, G., Friedrich, H.: Modulare Karosseriebauweise für ein Stadt-Elektrofahrzeug, ATZ, May 2017
Vohrer, S., Münster, M., Krischer, M., Kopp, G., Kopp, G., Friedrich, H.E.: DLR next generation vehicle concepts - urban - regional – interurban. In: Stuttgarter Symposium, Stuttgart (2018)
Deutsches Zentrum für Luft- und Raumfahrt - Verkehr, “Urban Modular Vehicle (UMV)”. https://verkehrsforschung.dlr.de/de/projekte/ngc-umv. Accessed 17 Aug 2018
DIN 1946-3, Raumlufttechnik - Teil 3: Klimatisierung von Personenkraftwagen und Lastkraftwagen, Berlin: Deutsches Institut für Normung (2006)
Arbeitsmedizin, B.F.A.U.: “Heiße Medien/Oberflächen”. https://www.baua.de/DE/Themen/Arbeitsgestaltung-im-Betrieb/Gefaehrdungsbeurteilung/Expertenwissen/Thermische-Gefaehrdungen/Heisse-Medien/Heisse-Medien_dossier.html?pos=2. Accessed 17 Aug 2018
Weustenfeld, T.: Heiz- und Kühlkonzept für ein batterieelektrisches Fahrzeug basierend auf Sekundärkreisläufen, Braunschweig: Cuvillier (2017)
Homann, G.: Energieeffizientes Heizen eines E-Fahrzeugs, Wolfsburg: Dissertation TU Braunschweig (2015)
Winter, M.: “Quo Vadis Batterietechnologie?” In: Batterieforum Deutschland, vol. 3, Berlin (2015)
Idaho Natrional Laboratory, Measurements on energy consumption of battery electric vehicles, Idaho Falls: Idaho National Laboratory, 2011–2015
Korthauer, R.: Handbuch Lithium-Ionen-Batterien. Springer Verlag, Heidelberg (2013)
Schüppel, F.: Optimierung des Heiz- und Klimakonzepts zur Reduktion der Wärme- und Kälteleistung im Fahrzeug. Cuvillier Verlag, Berlin (2015)
Chediak, M.: The Latest Bull Case for Electric Cars: the Cheapest Batteries Ever, Bloomberg, 5 December 2017. https://www.bloomberg.com/news/articles/2017-12-05/latest-bull-case-for-electric-cars-the-cheapest-batteries-ever. Accessed 17 July 2018
UOC: Scientists, Accelerating US Leadership in Electric Vehicles, Cambridge, MA (2017)
Glaser, T.: Techno-ökonomische Analyse eines thermischen Energiespeichers für elektrifizierte Fahrzeugkonzepte. Hochschule Aalen, Stuttgart (2017)
Knote, A.: zur Standardisierung und Zielkosten für Elektrobusse. Fraunhofer IVI, Dresden (2017)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Kraft, W., Jilg, V., Klein Altstedde, M., Lanz, T., Vetter, P., Schwarz, D. (2019). Thermal High Performance Storages for Use in Vehicle Applications. In: Junior, C., Dingel, O. (eds) Energy and Thermal Management, Air-Conditioning, and Waste Heat Utilization. ETA 2018. Springer, Cham. https://doi.org/10.1007/978-3-030-00819-2_6
Download citation
DOI: https://doi.org/10.1007/978-3-030-00819-2_6
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-00818-5
Online ISBN: 978-3-030-00819-2
eBook Packages: EngineeringEngineering (R0)