Abstract
In view of applications of fiber reinforced plastics at cryogenic temperatures, the mechanical properties of these materials have to be tested both at low temperatures and under various loading conditions (e.g. in tension, compression, shear and in particular in the crack opening mode). The main difficulty with a characterization of the crack growth (mode I) in glass-fiber reinforced materials lies in the fact that the crack length as well as the crack tip cannot be assessed with sufficient accuracy because of delamination and bridging of broken and unbroken fibers. Hence, linear elastic fracture-mechanics cannot be employed. In the present work, first attempts to characterize crack growth in mode I under quasi-static loading conditions in terms of fracture-mechanics have been made. Tests and evaluation procedures based on the fracture-energy-concept, which does not require the knowledge of the exact crack length, have been made at room temperature and at 77 K using a two dimensional glass-fiber reinforced epoxy (ISOVAL 10). Details of the technique as well as results of acoustic-emission investigations and of the influence of sample shape on the fracture-mechanical quantities will be presented. Advantages and disadvantages of the new technique will be discussed.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
S. Hashemi, A. J. Kinloch and J. G. Williams, Mechanics and mechanisms of delamination in a poly(ether sulphone)-fibre composite, Comp. Sci. Tech. 37: 429–462 (1990).
G. M. Newaz and J. Ahmad, A simple technique for measuring mode I de-lamination energy release rate in polymeric composites, Eng. Fract. Mech. 33:541–552 (1989).
A. C. Garg, Intralaminar and interlaminar fracture in graphite/epoxy laminates, Eng. Fract. Mech. 23: 719–733 (1986).
P. K. Sarkarand S. K. Maiti, Prediction of mode I fracture toughness of a laminated fibre composite from matrix fracture toughness of the basic layer, Eng. Fract. Mech. 38: 71–82 (1991).
A. Hillerborg, Analysis of a single crack, in Proc. “Fracture Mechanics of Concrete, Developments in Civil Engineering”, Ed. by F. Wittmann, Elsevier Amsterdam, 7:223-249 (1983).
E. K. Tschegg, Strain softening behavior of fiber-reinforced materials, Mat. Sci. Eng. submitted (1991).
B. Hillemeier, Bruchmechanische Untersuchungen des RiBfortschritts in zementgebundenen Werkstoffen; thesis, Universität Karlsruhe (1976).
E. K. Tschegg, “Prüfeinrichtung zur Ermittlung von bruch- mechanischen Kennwerten sowie hiefür geeignete Prüfkörper”, Patent No. 390328, 1986, Patent application 31. 1. 1986.
E. K. Tschegg, New equipment for fracture tests on concrete, J. Mat. Struct. submitted (1990).
H. N. Linsbauer and E. K. Tschegg, Determination of fracture energy of cementitious materials subjected to environmental influences, Final report Al, COST 502, No. HNL-01–89 (1989).
E. K. Tschegg, K. Humer and H. W. Weber, Influence of test geometry on tensile strength of fibre reinforced plastics at cryogenic temperatures, Cryogenics 31: 312–318 (1991).
E. K. Tschegg, K. Humer, H. W. Weber, to be published.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1992 Springer Science+Business Media New York
About this chapter
Cite this chapter
Tschegg, E.K., Humer, K., Weber, H.W. (1992). Fracture-Mechanical Characterization of Fiber Reinforced Plastics in the Crack-Opening-Mode (Mode I). In: Fickett, F.R., Reed, R.P. (eds) Materials. Advances in Cryogenic Engineering, vol 38. Springer, Boston, MA. https://doi.org/10.1007/978-1-4757-9050-4_49
Download citation
DOI: https://doi.org/10.1007/978-1-4757-9050-4_49
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4757-9052-8
Online ISBN: 978-1-4757-9050-4
eBook Packages: Springer Book Archive