Abstract
A two-stage 4 K Modified-Solvay cycle cryocooler1, which is a pneumatically driven Gifford — McMahon cryocooler and will be used for the conduction-cooled low temperature superconducting magnets, has been optimized by numerical and experimental study. After the optimization, the maximum cooling capacity of 36.5 W at 35 K on the first stage and 1.08 W at 4.2 K on the second stage with 6.7 kW input power has been obtained. This is the world’s first pneumatically driven G-M cryocooler which has over 1 W cooling capacity at 4.2 K. In this paper, experimental and numerical results of the influence of the valve opening timing and the displacer motion concerning the cooling capacity are described. The experimentally obtained optimum P-V diagram and valve timing are in good agreement with the numerical simulation results. And the reliability tests (over 100 times of cool-down and warm-up cycle, and over 3,000 hours continuous operation) were successfully conducted. It can be expected that this 4 K cryocooler has a high reliability equivalent to the commercial G-M cryocoolers which operate above 10 K on the 2nd stage temperature.
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsPreview
Unable to display preview. Download preview PDF.
References
R.C. Longsworth, A modified Solvay-cycle cryogenic refrigerator, Adv. Cryog. Eng., Vol.16:195(1971).
M. Sahashi et al., New magnetic material R3T system with extremely large heat capacities used as heat regenerators, Adv. Cryog. Eng., Vol.35B:1175(1990).
R. Li et al., Influence of valve open timing and interval on performance of 4 K Gifford-McMahon cycle cryocooler, Adv. Cryog. Eng., Vol.41B:1601(1996).
T. Kuriyama et al., Optimization of operational parameters for a 4 K-GM refrigerator, Adv. Cryog. Eng., Vol.41B:1615(1996).
T. Satoh et al., Development of 1.5W 4K G-M cryocooler with magnetic regenerator material, Adv. Cryog. Eng.,Vol.41B:1631(1996).
H. Seshake et al., Analysis of rare earth compound regenerators operating at 4 K, Adv. Cryog. Eng., Vol.37B:995(1992).
T. Tsukagoshi et al., Refrigeration capacity of a GM refrigerator with magnetic regenerator materials, Adv. Cryog. Eng., Vol.41B:1623(1996).
Zhang Zhu and Liang Zhang, The theoretical cooling capacity and heat loss analysis of a 4.2K G-M refrigerator, Adv. Cryog. Eng., Vol.41B:1639(1996).
L. Zang et al., Study of effect of heat transfer in the cold head to the performance of a 4.2K G-M refrigerator, Adv. Cryog. Eng., Vol.4 IB: 1645(1996).
P.Y. Wu et al., Dynamic simulation of magnetic material regenerator and comparison with experiment, Cryogenics, Vol.36:259(1996).
T. Inaguchi et al., Proceedings of 56th Meeting on Cryogenics and Superconductivity:3(1997).
Sumitomo Heavy Industries, Ltd. “Sumitomo Heavy Industries Technical Review”, Vol.45 No.l33:50(1997).
G. Chen et al., Investigation on a two-stage Solvay refrigerator with magnetic material regenerator, Cryogenics ICEC Supplement, Vol.32:5(1992).
T. Kurihara et al., Numerical analysis of the performance of pneumatic driven 4 K-GM refrigerator, Cryogenic Engineering, Vol.31:197(1996).
H. Torii et al., Development of two-stage 4K cryocooler with modified Solvay cycle, Proceedings of ICEC 16(1996).
M. Okamoto et al., Proceedings of 55th Meeting on Cryogenics and Superconductivity:26(1996).
R. Radebaugh and J.E. Zimmerman, NBS Special Publication 508:67(1978).
T. Kuriyama et al, Temperature profile and mass flow rate distribution in regenerator of Gifford-McMahon refrigerator using magnetic regenerator materials, Cryogenic Engineering, Vol.31:203(1996).
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1998 Springer Science+Business Media New York
About this chapter
Cite this chapter
Kurihara, T., Okamoto, M., Sakitani, K., Torii, H., Morishita, H. (1998). Numerical and Experimental Study of a 4 K Modified-Solvay Cycle Cryocooler. In: Kittel, P. (eds) Advances in Cryogenic Engineering. Advances in Cryogenic Engineering, vol 43. Springer, Boston, MA. https://doi.org/10.1007/978-1-4757-9047-4_226
Download citation
DOI: https://doi.org/10.1007/978-1-4757-9047-4_226
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4757-9049-8
Online ISBN: 978-1-4757-9047-4
eBook Packages: Springer Book Archive