Abstract
Metal matrix composites consist of a metal or an alloy as the continuous matrix and a reinforcement that can be particle, short fiber or whisker, or continuous fiber. In this chapter, we first describe important techniques to process metal matrix composites, then we describe the interface region and its characteristics, properties of different metal matrix composites, and finally, we summarize different applications of metal matrix composites.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
M.K. Aghajanian, J.T. Burke, D.R. White, and A.S. Nagelberg (1989). SAMPE Quart., 34, 817–823.
R.J. Arsenault and R.M. Fisher (1983). Scripta Met, 17, 67.
R.J. Arsenault and N. Shi (1986). Mater. Sci Eng., 81, 175.
D.K. Balch, T.J. Fitzgerald, V.J. Michaud, A. Mortensen, Y.-L. Shen, and S. Suresh (1996). Metall, and Mater. Trans. A., 27A, 3700.
A.A. Baker and C. Shipman (1972). Fibre Sci. & Tech., 5, 282.
E.V. Barrera, J. Sims, D.L. Callahan, V.J. Provenzano, J. Milliken, and R.L. Holtz (1994). J. Mater. Res., 9, 2662.
A.R. Champion, W.H. Krueger, H.S. Hartman, A.K. Dhingra (1978). In Proc: Intl. Conf. Composite Materials (ICCM/2), TMS-AIME, New York, p. 883.
K.K. Chawla (1973a). Metallography, 6, 155.
K.K. Chawla (1973b). Philos. Mag., 28, 401.
K.K. Chawla (1974). In Grain Boundaries in Eng. Mater., Claitor’s Publishing, Baton Rouge, LA, 435.
K.K. Chawla (1975). Fibre Sci. & Tech. 8, 49.
K.K. Chawla (Dec, 1985). J. of Metals, 37, 25.
K.K. Chawla (1989). In Precious and Rare Metal Technologies, Elsevier, Amsterdam, p. 639.
K.K. Chawla (1991). In Metal Matrix Composites; Properties. Academic Press, San Diego.
K.K. Chawla and C.E. Collares (1978). In Proceedings of the 1978 International Conference on Composite Materials (ICCM/2), TMS-AIME, New York, p. 1237.
K.K. Chawla, A.H. Esmaeili, A.K. Datye, and A.K. Vasudevan (1991). Scripta Met et Mater., 25, 1315–1319.
K.K. Chawla and L.B. Godefroid (1984). In Proc: 6th Int. Conf. on Fracture, Pergamon Press, Oxford, p. 2873.
K.K. Chawla and P.K. Liaw (1979). J. Mater. Sci. 14, 2143.
K.K. Chawla and M. Metzger (1972). J. Materials Sci., 7, 34.
K.K. Chawla and M. Metzger (1978). In Fracture 1977: Proc. of the 4th Int. Conf. Fracture, Pergamon Press, vol. 3, p. 1039.
T. Christman and S. Suresh (1988). Mater. Sci. Eng. A102, 211.
L. Christodolou, P.A. Parrish, and CR. Crowe (1988). Mat. Res. Soc. Symp. Proc, 120, 29–34.
H.E. Cline, J.L Walter, E.F Koch, L.M. Osika (1971). Acta. Met,, 19, 405.
A.J. Cook and P.S. Warner (1991). Mater. Sci. Eng. A144, 189.
J.A. Cornie, Y.-M. Chiang, D.R. Uhlmann, A.S. Mortensen, and J.M. Collins (1986). Ceram. Bull, 65, 293.
A.P. Divecha, S.G. Fishman, and S.D. Karmarkar (September 1981). J. Metals., 9, 12.
T. Donomoto, N. Miura, K. Funatani, and N. Miyake (1983). SAE Tech. Paper No. 83052, Detroit, MI.
D.C. Dunand and A. Mortensen (1991a). Acta Metall. Mater., 39, 127.
D.C. Dunand and A. Mortensen (1991b). Acta Metall. Mater., 39, 1405.
I. Dutta, D.L. Bourell, and D. Latimer (1988). J. Comp. Mater., 22, 829.
I. Dutta and D.L. Bourell (1988). Mater. Sci. Eng., A112, 67.
I. Dutta and D.L. Bourell (1990). Acta Metall, 38, 2041.
A.H. Esmaeili, K.K. Chawla, A.K. Datye, and A.K. Vasudevan (1991). In Proc. of the Intl. Conf. on Comp. Mater., ICCM/VII, Honolulu, HI, p. 17F1.
S.G. Fishman (1986). AST M Standardization News, 46.
L.-J. Fu, M. Schmerling, and H.L. Marcus (1986). In Composite Materials: Fatigue and Fracture, ASTM STP 907, ASTM, Philadelphia p. 51.
C. Fujiwara, M. Yoshida, M. Matsuhama, and S. Ohama (1995). In Proc. International Conf. on Composite Materials (ICCM-10), p. II-687.
C.M. Gabryel and A.D. McLeod (1991). Met., Trans., 23A, 1279.
A.K. Ghosh (1993). In Metal Matrix Composites, Butterworth-Heinemann, Boston, MA, p. 119.
R.G. Hill, R.P. Nelson, and C.L. Hellerich (1969). In Proc. of the 16th Refractory Working Group Meeting, Seattle, WA.
W.H. Hunt (1994). In Processing and Fabrication of Adv. Materials, TMS, Warrendale, PA, p. 663.
W.H. Hunt, T.M. Osman, and J.J. Lewandowski (Mar. 1991). J. Miner. Metal Mater. Soc., 30.
J.A. Isaacs, F. Taricco, V.J. Michaud, and A. Mortensen (1991). Met.,. Trans., 22A, 2855.
C. Jones, C.J. Kiely, and S.S. Wang (1993). J. Mater. Res., 4, 327.
H.A. Katzman (1987). J. Mater. Sci., 22, 144.
A. Kelly and K.N. Street (1972). Proc. R Soc London, 328A, 283.
A. Kelly and W.R. Tyson (1966). J. Mech. Phys. Solids, 14, 177.
R.J. Kerans and T.A. Parthasarathy (1991). J. Am. Ceram. Soc., 74, 1585.
A. Kohyama, N. Igata, Y. Imai, H. Teranishi, and T. Ishikawa (1985). In Proc: Fifth International Conference on Composite Materials (ICCM/V), TMS-AIME, Warrendale, PA, p. 609.
D.J. Lloyd (1994). International Materials Review, 39, 1.
A.P. Majidi and T.W. Chou (1987). Proc. ICCM VI, 2, 422.
M. Manoharan, L. Ellis, and J.J. Lewandowski (1990). Scripta Met.,. et Mater., 24, 1515.
C. Manning and T. Gurganus (1969). J. Am. Ceram. Soc., 52, 115.
D.L. McDanels (1985). Met.,. Trans., 16A, 1105.
M. McLean (1983). Directionally Solidified Materials for High Temperature Service, The Metals Soc, London.
W. Meyerer, D. Kizer, S. Paprocki, and H. Paul (1978). In Proc: 1978 Intl Conf. Composite Materials (ICCM/2), TMS-AIME, New York, p. 141.
M.A. Meyers and K.K. Chawla (1984). Mechanical Metallurgy, Prentice-Hall, Englewood Cliffs, NJ, 494.
V.J. Michaud (1993). In Metal Matrix Composites, Butterworth-Heinemann, Boston, MA, p. 3.
R. Mitra, W.A. Chiou, M.E. Fine, and J.R. Weertman (1993). J. Mater. Res., 8, 2300.
A. Mortensen, J.A. Cornie, and M.C. Flemings (1988). J. Metals, 40, 12.
A. Mortensen, M.N. Gungor, J.A. Cornie, and M.C. Flemings (Mar., 1986). J. of Metals, 38, 30.
V.C. Nardone and K.M. Prewo (1986). Scipta Met.,., 20, 43.
R. Naslain, J. Thebault, and R. Pailler (1976). In Proceedings of the 1975 International Conference on Composite Materials, vol. 1, TMS-AIME, New York, p. 116.
T.G. Nieh and R.F. Karlak (1984). Scripta Met.,., 17, 67.
S. Nourbakhsh, F.L. Liang, and H. Margolin (1990). Met.,. Trans. A, 21A, 213.
L. Parrini and R. Schaler (1994). J. of Alloys and Compounds, 211, 402.
P.G. Partridge and CM. Ward-Close (1993). Int. Mater. Rev., 38, 1.
M. Pfeifer, J.M. Rigsbee, and K.K. Chawla (1990). J. Mater. Sci, 25, 1563.
W.L. Phillips, (1978). In Proc: 1978 Intl Conf. Composite Materials (ICCM/2), TMS-AIME, New York, p. 567.
S. Pickard and D.B. Miracle (1995). Mater. Sci. & Eng. A, A203, 59.
H.J. Rack (1987). In Sixth International Conference on Composite Materials, New York: Elsevier Applied Science, p. 382.
F. Rezai-Aria, T. Liechti, and G. Gagnon (1993). Scripta Metall. Mater., 28, 587.
S. Rhee, (1970). J. Am. Ceram. Soc., 53, 386.
P.K. Rohatgi, R. Asthana, and S. Das (1986). Intl. Met.,. Rev., 31, 115.
Y.-L. Shen, A Needleman, and S. Suresh (1994). Metall. Mater. Trans. A., 25A, 839.
O. Sherby, S. Lee. R. Koch, T. Sumi, and J. Wolfenstine (1985). Mater. Manufact. Processes, 5, 363.
N. Shi and R.J. Arsenault (1991). J. of Comp. Tech, and Res., 13, 211.
N. Shi and R.J. Arsenault (1993). Met.,. Trans., 24A, 1879.
J. van Suchtelen (1972). Philips Res. Rep., 27, 28.
T.S. Srivatsan and E.J. Lavernia (1992). J. Materials Sci., 27, 5965.
N.S. Stoloff (year). In Advances in Composite Materials Applied Sci. Pub., London, p. 247.
S. Suresh and K.K. Chawla (1993). In Metal Matrix Composites, Butterworth-Heinemann, Boston, MA, p. 119.
R.U. Vaidya and K.K. Chawla (1994). Composites Sci. and Tech., 50, 13.
J. van Suchtelan (1972). Philips Res. Report, 27, 28.
E. Tempelman, W.L. Dalmijn, and A. Vlot (April, 1996). JOM, 48, 62.
S. Towata and Y. Yamada (1995). Trans. Japan Inst. of Metals, 27, 709.
A.K. Vasudevan and R.D. Doherty (Eds.) (1989). Aluminum Alloys — Contemporary Research and Applications, Academic Press, Boston.
M. Vogelsang, R.J. Arsenault, and R.M Fisher (1986). Met., Trans., 17A, 379.
J.L. Walter (1982). In In Situ Composites IV, Elsevier, New York, p. 85.
R. Warren and C.-H. Andersson (1984). Composites, 15, 101.
D.R. Williams and M.E. Fine (1985a). In Proc. 5th Int. Conf Composite Mater., (ICCM/V), TMS, Warrendale, PA. p. 275.
D.R. Williams and M.E. Fine (1985b). In Proc: Fifth Intl Conf Composite Materials (ICCM/V), Warrendale, PA.: TMS-AIME, p. 369.
Z.R. Xu, K.K. Chawla, R. Mitra, and M.E. Fine (1994). Scripta Met.,. et Mater. 31, 1277.
Z.R. Xu, A. Neuman, K.K. Chawla, A. Wolfenden, and G.M. Liggett and N. Chawla (1995). Mater. Sci. & Eng. A. A203, 75.
Suggested Reading
T.W. Clyne and P.J. Withers (1993). An Mroduction to Metal Matrix Composites, Cambridge University Press, Cambridge.
S. Suresh, A. Needleman, and A. Mortensen (Eds.) (1993). Metal Matrix Composites, Butterworth-Heinemann, Boston.
M. Taya and R.J. Arsenault (1990). Metal Matrix Composites, Pergamon Press, Oxford.
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 1998 Springer Science+Business Media New York
About this chapter
Cite this chapter
Chawla, K.K. (1998). Metal Matrix Composites. In: Composite Materials. Springer, New York, NY. https://doi.org/10.1007/978-1-4757-2966-5_6
Download citation
DOI: https://doi.org/10.1007/978-1-4757-2966-5_6
Publisher Name: Springer, New York, NY
Print ISBN: 978-1-4419-3124-5
Online ISBN: 978-1-4757-2966-5
eBook Packages: Springer Book Archive