Abstract
In elementary-particle physics, the energies of elementary particles or radiation events are measured or detected by means of a semiconductor detector readout system. A principle schematic of such a detection system is depicted in Fig. 5.1. An inverse biased photo sensitive diode (Si or Ge) detects charged particles or radiation events by generating electron-hole pairs within the detector material. The generated electrons drift in a high electrical field towards the positive-biased n+ contact of the detector and are finally collected. Since the collection time is very short, being in the order of several ns [5.1], [5.2], the detector output signal can be represented as a Dirac current impulse, the integral of which equals the total generated charge Q. The generated charge Q is integrated onto a small feedback capacitor C f . by means of a low noise charge sensitive amplifier (CSA) giving rise to a voltage step at the CSA output with an amplitude Q/C f . The wide use of the CSA at the front end stems from its low noise configuration and insensitivity of the gain to the detector capacitance variations. The step signal is fed to a main amplifier where pulse shaping is performed, primarily to optimize the S/N ratio of the readout system. Therefore, it is called a pulse shaper. In all cases, the resulting output signal is a rather narrow pulse suitable for further processing. Depending on the application, the pulse processing unit can simply be a Multi-Channel Analyzer (MCA) in radiation spectroscopy applications, a series of discriminators for event detections or sample-hold circuits in a multi-channel readout system to store the informations for serial read out. However, for resolution analyses, the detail of the circuits in the processing unit is of no concern and only the CSA and the pulse shaper will therefore be considered in this chapter.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsPreview
Unable to display preview. Download preview PDF.
References
E. Gatti and P.F. Manfredi, Processing the Signal from Solid-State Detectors in Elementary particle Physics, 1986
Glenn. F. Knoll, Rdiation detection and measurement, John Wiley & Sons, 1979
R. Hofmann et al., “Development of readout electronics for monolithic integration with diode strip detectors,” Nuclear Instrum and Methods in Phys Research A266 pp. 196–199, 1984
James T. Walker et al., “development of high density readout for silicon strip detectors,” Nuclear Instrum and Methods in Phys Research A253 pp. 427–433, 1987
P. Seller, “A CMOS integrated circuit for silicon strip detector readout,” Digest of papers ESSCIRC 1987, pp. 281–284
Erik H.M Heijne and Pirre Jarron, “A low noise CMOS integrated signal processor for multi-element particle detectors,” Digest of papers ESSCIRC 1988, pp. 68–69
W. Buttler and B.J. Hosticka, “Low noise low power CMOS readout systems for silicon strip detectors,” Digest of papers ESSCIRC 1988, pp. 171–174
A. Olsen et al., “A CMOS charge sensitive amplifier for silicon strip detectors: Design criteria and test results,” Nuclear Instrum and Methods in Phys Research A273 pp. 565–569, 1988
G. Lutz et al., “Low noise monolithic CMOS front end electronics,” Nuclear Instrum and Methods in Phys Research A263 pp. 163–173, 1988
W. Buttler and BJ.Hosticka, “All-WET amplifiers for low noise applications,” Digest of papers ESSCIRC 1989, pp. 133–136
E. Beuville et al., “Amplex, a low-noise, low-power analog CMOS signal processor for multi-element silicon particle detectors,” Nuclear Instrum and Methods in Phys Research A288 pp. 157–167, 1990
F.S. Goulding and D.A. Landis, “Signal processing for semiconductor detectors,” IEEE Trans on Nuclear Science, Vol.NS-29, No. 3, pp. 1125–1141, June 1982
F.S. Goulding, “Pulse-shaping in low noise nuclear amplifier: A physical approach to noise analysis,” Nuclear Instrum and Methods 100 pp. 493–504, 1972
M.O. Deighton, “A time-domain method for calculating noise of active integrator used in pulse amplitude spectrometry,” Nuclear Instrum and Methods 58 pp.201212, 1968
W. Sannen, “Integrated low noise amplifiers in CMOS technology,” Nuclear Instrum and Methods in Phys Research A253 pp. 427–433, 1987
Z.Y.Chang and W.Sansen, “Test structure for evaluation of 1/f noise in CMOS technologies,” IEEE Proc ICMTS’89 pp.143–146
W. Buttler et al., “Evaluation in the criteria that underlie the design of a monolithic preamplifier system for microstrip detectors,” Nuclear Instrum and Methods in Phys Research A288 pp. 140–149, 1990
U. Schoeneberg et al., “A CMOS readout system for vey large detector capacitance,” Nuclear Instrum and Methods in Phys Research A288 pp. 191–196, 1990
J. Lewis et al., “A monolithic charge multiplexer with 0.5% accuracy,” Nuclear Instrum and Methods in Phys Research A288 pp. 197–208, 1990
D.A. Landis et al., “Transistor reset preamplifier for high counting rate high resolution spectrocopy,” IEEE Trans on Nuclear Science, Vol.NS-29, No. 1, pp. 619–624, Feb. 1982
Paul R. Gray and Robert G. Meyer, “Recent advances in monolithic operational amplifier design,” IEEE Trans. Circuits and systems, Vol. CAS-21, No. 3, May 1974, pp. 317–327
Paul R. Gray and Robert G. Meyer, “MOS operational amplifier design–A tutorial overview,” IEEE J. Solid-State Circuits, Vol. SC-17, No. 6, Dec. 1982, pp. 969–982
W. Sansen and Z.Y. Chang, “Limits of low noise performance of detector readout front end in CMOS technology,” to appear IEEE Trans. Circuits Syst Vol. CAS-37, 1990
W. Sansen and Z.Y.Chang, “Feedforward compensation techniques of CMOS high frequency amplifiers,” to appear IEEE J. Solid-State Circuits
Z.Y. Chang and W. Sansen, “Effect of 1/f noise on resolution of CMOS analog readout system for micro-strip and pixel detectors,” to appear Nuclear Instrum and Methods A 1991
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 1991 Springer Science+Business Media New York
About this chapter
Cite this chapter
Chang, Z.Y., Sansen, W.M.C. (1991). Low-Noise High-Speed CMOS Detector Readout Electronics. In: Low-Noise Wide-Band Amplifiers in Bipolar and CMOS Technologies. The Springer International Series in Engineering and Computer Science, vol 117. Springer, Boston, MA. https://doi.org/10.1007/978-1-4757-2126-3_5
Download citation
DOI: https://doi.org/10.1007/978-1-4757-2126-3_5
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4419-5124-3
Online ISBN: 978-1-4757-2126-3
eBook Packages: Springer Book Archive