Abstract
The purpose of this chapter is to provide the port designer with guidelines on loads and forces to be used in the design of port related marine structures.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Aashto, 1992. Standard Specifications for Highway Bridges, 13th ed. with annual supplement, Washington, D.C.
Abdelnour, R. 1981. “Model Tests of Multiyear Pressure Ridges Moving onto Conical Structures.” Proceedings IAHR Symposium on Ice, Quebec City, Quebec.
Afanas’ev, V. P., Dolgopolov, Y. V., and Shraishtein, Z. I., 1971. “Ice Pressure on Individual Marine Structures.” Ice Physics and Ice Engineering, Israel Program for Scientific Translation, 1973, Tel Aviv.
Algermissen, S. T. and Perkins, D. M., 1976. “A Probabilistic Estimate of Maximum Acceleration in Rock in Contiguous United States.” USGS Open File Report No. 76–416.
Alliston, G. R., 1985. “Low Friction and Adfreeze Coatings.” Proceedings Conference Arctic 1985.
Anderson, J. G., Bodin, P., Brune, J. N., Prince, J., Singh, S. K., Quaas,, T., and Onate, M., 1986. “Strong Ground Motion from the Michoacan, Mexico Earthquake. Science,Vol 233:
Apelt, C. J. and Piorewicz, J., 1987. “Laboratory Studies of Breaking Wave Forces Acting on Vertical Cylinders in Shallow Water.” Coastal Engineering, Vol. 11, No 3.
Assur, A., 1975. “Problems on Ice Engineering.” Proceedings Third International Symposium on Ice Problems, Hanover, NH.
Balfour, J. S., Feben, J. C., and Martin, D. L., 1980. “Fendering Requirement/Design Fender Impact Criteria.” Ports ‘80. ASCE Specialty Conference, Norfolk, VA.
Ball, D. J.,1982. The Concept of Added Mass.“ The Dock and Harbour Authority,Vol. 61.
Ball, D. J. and Wilcock, J. A., 1981. “Ship and Jetty Interaction. The Dock and Harbour Authority,Vol. 62, No 727.
Barel, P. Y. and Gabriel, J. C., 1986. The Seismic Response of Two Dimensional Sedimentary Deposits with Large Vertical Velocity Gradients.“ Bulletin of the Seismological Society of America, Vol. 76.
Basham, P. W., Wiechert, D., Anglin, F. M., and BERRY, M. J., 1985. New Probabilistic Strong Seismic Ground Motion Maps of Canada.“ Bulletin of the Seismological Society of America, Vol. 75.
Beck, J. L. and Hall, J. F., 1986. “Factors Contributing to the Catastrophe in Mexico City During the Earthquake of September 19, 1985.” Geophysical ResearchLetters, Vol. 13.
Bercha, F. G., 1986. “Ice-Structure Interaction: Engineering Design and Construction Criteria,” Vol. 1 Formal Report AES/SAG 1–2: 86–17V1 for Public Works Canada.
Berg, G. V., 1983. Seismic Design Codes and Procedures, Earthquake Engineering Research Institute, Berkeley, CA.
Berrill, J. B., 1977. “Site Effects During the San Fernando, California Earthquake.” Proceedings of the 6th World Conference on Earthquake Engineering, India.
Blanchet, D., Churcher, A., Fitzpatrick, J., and Barda-Blanchet, 1989. “An Analysis of Observed Failure Mechanisms for Laboratory, First-Year and Multi-Year Ice.” Special Report 89–5 by Iahr, edited by G. W. Timco, Hanover, NH.
Blok, J. J. and Dekker, J. N., 1979. “On Hydrodynamic Aspects of Ship Collisions with Rigid or Non-Rigid Structures.” Offshore Technology Conference, Houston, ` TX, Paper OTC 3665.
Blume, J. A., Sharpe, R. L., and Dalal, J. S., 1972. “Recommendations for Shape of Earthquake Response Spectra.” AEC Report WASH-1254.
Bolt, B. A., 1969. “Duration of Strong Motion.” Proceedings 4th World Conference on Earthquake Engineering. Santiago, Chile.
Bolt, B. A., 1987. Earthquakes, W. H. Freeman Co., New York.
Boivize, H., 1980. “Math Model for Harbor Wharves/Ship Motion/Moorings.” Proceeding ASCE Speciality Conference PORTS ‘80. Norfolk, VA.
Brattleland, E., 1974: “A Survey on Acceptable Ship Movements in Harbours.” The Dock and Harbour Authority, Vol. 55, No 647.
Bridgeman, S. G., 1984. “Wave Force and Movement on Caisson.” Computer. Program `Difmom’.
Bridgeman, S. G., 1987. Computer Software “Wave’ Force and Moment on Pile.”
British standard code of practice for maritime structures, part 1, general criteria, 1984, bs64349 including 1987 amendment.
British Standard Code of Practice for,mar- Itime Structures., 1part 4, Design of Fender-mg and Mooring Systems, BS6349, 1985.
Bruijn, P., 1989. Port Engineering, 4th ed., Gulf Publishing Company, Houston, TX.
Bursnall, W. J., and Loftin, L. K., 1951. “Experimental Investigation of the Pressure Distribution About a Yawed Cylinder in the Critical Reynolds Number Range.” Technical Note 2463, National Advisory Committee for Aeronauties.
Bushnell, M., 1977. “Forces on Cylinder Arrays.” Offshore Technology Conference, Houston, TX, Paper 2903.
Cammaert, A. B., Kimura, T., Noma, N., Yashima, M., Yang, S., and Matsushima, Y., 1986. “Ad-freeze Forces on Offshore Platforms.” Proceedings International OMAE Symposium, Tokyo, Vol. 4.
Campbell, K. W., 1985. “Strong Motion Attenuation Relationships: A Ten Year Perspective.” Earthquake Spectra, Vol. 1. Can.Csa S6–M87. Design of Highway Bridges, Canadian Standard Association. “Review of Current Ice Technology and Evaluation of Research Priorities.” Report Series No. 17, Inland Water Branch.
Chake Barti, S. K., 1991. “Wave Forces on Offshore Structures.” Handbook of Coastal and Ocean Engineering, Vol. 2, Herbich, J. B. (ed.), Gulf Publishing Company, Houston, TX.
Chakrabarti, S. K. and Tam, W. A., 1973. “Gross and Local Wave Loads on Large Vertical Cylinder.” Proceedings Offshore Technology Conference, Houston, TX, Paper 1818.
Chang, K. S., 1964. “Transverse Forces on Cylinders Due to Vortex Shedding in Waves.” SM Thesis; Civil Engineering Department, Massachusetts Institute of Technology.
Chopra, A. K., 1981: Dynamics of Structures-A Primer. Earthquake Engineering Research Institute, Berkeley, CA.
Christensen, T. F. and Zabilansky, I., 1985. “Review of Experimental Studies of Uplifting Forces Enerbed by Adfrozen Ice on Marine Piles:” Proceedings POAC 1985.
Cornell, C. A., 1968. “Engineering Seismic Risk Analysis” Bulletin of the Seismological Society of America, Vola 58.
Croasdale, K. R., 1980. “Ice Forces on Fixed, Rigid Structures.” Special Report 80–26,’ International Association for Hydraulic Research (U.S. Army Corps of Engineers, Cold Regions Research and Engineering Laboratory).
Croasdale, K. R., Morgenstern, N. R., and Nuttall, J. B., 1977. “Indentation Tests to Investigate Ice Pressure on Vertical Structures.” Journal of Glaciology, Vol. 19, No. 81.
Danielewicz, B. W. and Blanchet, D., 1987. “Measurements of Multi-Year Ice Loads on Hans Island During 1980 and 1981.” International Conference POAC Preprint, Fairbanks, AK.
Dent, E. G. and ‘Saurin, B. F., 1969. “Tanker Terminals-Berthing Structures.” Symposium on Tanker and Bulk Carriers Terminal, Institute of Civil Engineers, London.
Det Norske Veritas., 1977. Rules for the Design, Construction and Inspection of Offshore Structures, Novik, Norway.
Dobry, R.,’OwEIs, I., and Urzua A., 1976. “Simplified Procedures for Estimating the Fundamental Period of a Soil Profile.” Bulletin of the Seismological Society of America, Vol 66.
Drouin, M., 1970. “State of Research on Ice Thermal Thrust.” IAHR Proceedings of Symposium, Reykjavik, Iceland.
Eau., 1990. Recommendations of the Committee for Waterfront Structures, Erust and Sohn, Berlin.
Edwards, R. Y. and Croasdale, K. R., 1976. “Model Experiments to Determine Ice Forces on Conical Structures.” Symposium on Applied Glaciology, International Glaciological Society, Cambridge.
Eeri Committee’ ON SEISMIC Risk, 1989. The Basics of Seismic Risk Analysis. Earthquake Spectra, Vol 5.
Elms, D. G. and Richards, R., 1990. “Seismic Design of Retaining Walls.” ASCE Proceedings of Specialty Conference on Design and Performance of Earth Retaining Structures, Cornell University,’ Ithaca, NY.
Epri, 1988. “A Criterion for Determining Ex-ceedance of the Operating Basis Earthquake.” Research Report NP-5930, Electric Power Research Institute, Palo Alto, CA.
Eranty, E. and Lee, G. C., 1981. “Introduction to Ice Problems in Civil Engineering.” Department of Civil Engineering, State University of New York, Buffalo, NY.
Fang, S., 1979. “Field Measurement of VLCC Mooring Loads.” Proceedings Offshore Tech-’ nology Conference, Houston, TX, Paper 3383.
Fenco Engineers, 1984. “Arctic Marine Design and Construction Handbook.” Transport Canada Report No. TP 5727E, Vol 1, Fenco Engineers, Montreal.
Fontijn, H. L., 1980. “The Berthing of a Ship to a Jetty. Journal of the Waterway, Port, Coastal and Ocean Division,Vol. 106, No. 2.
Fontijn, J. L., 1987. “On the Prediction of Fender Forces at Berthing Structures, Parts I and IL” Proceedings NATO Advanced Study Insti tute, Advances in Berthing and Mooring of Ships and Offshore Structures,“ Troudheim, Norway.
Frederking, R., ` 1980. ` “Dynamic Ice Forces on an Inclined Structure.” Physics and Mechanics of Ice,P. Tryde (ed.), Springer-Verlag, New York.
Fujino, M., 1968. “Steerability of Ship in Restricted Water.” Shipbuilding Association Report No 124 (in Japanese).
Garrison, C. J., Trum, A., Iverson, C. and Leivseth, S., 1974. “Wave Forces on Large Volume Structures-A Comparison Between Theory and Model Tests.” Proceedings of Offshore Technology Conference. Houston, TX, Paper 2137.
Gaythwaite, J. W.,1981. The Marine Environment and Structural Design,Van Nostrand Reinhold, New York:
Gaythwaite, J. W., 1990. Design of Marine Facilities for the Berthing, Mooring and Repair of Vessels,Van Nostrand Reinhold, New York.
Gershunov, E. M., 1985. “Shear Strength of the Adfreeze Bond and its Effect on Global Ice Loads Applied to Mobile Offshore Drilling Units Under Arctic Conditions.” Offshore Technical Conference, Houston, TX, Paper Otc 4687.
Giraudet, P., 1966. “Recherches experimentales sur i energie d’accostage des ` navires.” Annales des Ponts et Chausees, No 2.
Girgrah, M., 1977. “Practical Aspects of Dock Fender Design.” Proceedings of the Twenty-Fourth Congress; PIANC, SII-4, Leningrad.
Goda, Y.,1985. Random Seas and Design of Maritime Structures,University of Tokyo Press, Tokyo, Japan.
Gold, L. W., 1984. “Ice Pressures and Bearing Capacity.” Geotechnical’Engineering for Cold Regions, Andersland, O. B. and D. M. Anderson, D. M. (eds.), McGraw-Hill Book Company, New York.
Gorunov, B. F., 1980. Specializing Terminals in Sea Ports,Transport Publishing House, Moscow (In Russian).
Grim, O., 1955. “Das Schiff und des Dalben.” Schiff und Haven, Vol. 7.
Gurevich, V. B., 1969. Marine Structures for Inland Ports, Transport Publisher, Moscow (in Russian).
Hanks, T. C. and Kanamori, H., 1979. “A Moment-Magnitude Scale.” Journal of Geophysical Research, Vol. 84.
Hayama, Y. and Sakuraoha, M., 1996. “Effect of Compression Speed on Fender Performance,” Proceedings of 11th International Harbour Congress, Antwerpen, Belgium.
Hayasxi, T., 1962. “Ship Impact During Berthing.” Proceedings of Annual Presentations on Coastal Engineering (in Japanese).
Headland, J. R., 1992a. “Design of Fender Systems Using a Numerical Berthing Model.” Permanent International Association of Navigation Congresses Bulletin No 77.
Headland, J. R., 1992b. “A Computational Berthing Model for the Design of Fender Systems.” ASCE Proceedings Specialty Conference PORTS ‘82, Seattle, WA.
Headland, J. R., 1995. “Offshore Moorings in ”Marine Structures Engineering Specialized Applications,“ by G. Tsinker, Chapman and Hall, New York, N.Y.
Hendrick, G. J., 1980. “Testing of Used Tires for Fendering Systems on Marine Structures.” Public Works Canada, File Q50–8. Unpublished Report.
Herbich, J. B. (ed.)., 1991/1992. Handbook of Coastal and Ocean Engineering,Vols. 1, 2, and 3, Gulf Publishing Company, Houston; TX.
Hogben, N. and Standling, R. G., 1975. “Experience in Computing Wave Loads on Large Bodies.” Proceedings of Offshore Technology Paper 2189.
Hudson, D. E., 1979. Reading and Interpreting Strong Motion Accelerograms, Earthquake Engineering Research Institute, Berkeley, CA.
Isaacson, M., 1988. “Wave and Current Forces on Fixed Offshore Structures.” Canadian Journal of Civil Engineering; Vol: 15.
Isaacson, m. And Qi-Hua Zuo., 1989. “Nonlinear Wave forces on a circular cylinder.” canadian journal of civil engineering, vol. 16.
Isaacson, M., Allyn, N., and Ackerman, C., 1995. “Design Wave Loads for a Jetty at
Plymouth, Montserrat.“ Canadian Journal of Civil Engineering, Vol. 22.
Iyer, S. H., 1983. “Size Effects on Ice and Their Influence on the Structural Design of Offshore Structures.” Proceedings International Conference POAC, Vol. 2, Helsinki.
Izumiyama, K., Kitagawa, H., Koyama, K., and Uto, S., 1991. “On the Interaction Between a Conical Structure and Ice Sheet.” Proceedings of the 11th International Conference on Ports and Ocean Engineering Under Arctic Conditions, St. John’s, Canada.
Jackson, W. H., 1973. “Some Problems Associated with Jetties in Fast Flowing Water. Proceedings PLANC, 23rd Congress, Section II, Ottawa.
Jamieson, W. W., Mansard, E. P. D., and Mogridge, G. R., 1985. “Wave Load on a Conical Gravity Platform.” Behaviour of Offshore Structures, Elsevier Science Publishers, Amsterdam.
Jensen, O. J. and Warren, I. R., 1986. “Modeling of Waves in Harbours. Review of Physical and Numerical Methods.” The Dock and Harbour Authority, October.
Jensen, O. J., Viggosson, G., Thomsen, J., Bjirdal, S., Lundgren, J., 1990. “Criteria for Ship Movements in, Harbours.” Proceedings of the International Conference on Coastal Engineering, Venice, Italy.
Johnson, R. C. and Benoit, J. R., 1987. “Iceberg Impact Strength.” Proceedings OTC, Houston, TX.
Joyner, W. B. and Boore, D. M., 1982. “Prediction of earthquake response spectra.” Proceedings 51st Annual Convention, Structural Engineers Association of California (also ‘U.S. Geological Survey Open File Report 82–977 ).
Joyner, W. B. and Boore, D. M., 1988. “Measurement, Characterization and Prediction of Strong Ground Motion.” Proceedings of Conference on Earthquake Engineering and Soil Dynamics, II. Park City, Utah, ASCE, Washington, DC.
Junius, R. W., 1983. “Wharf Decks—Design Load vs Cost.” ASCE Proceedings of Specialty Conference PORTS ‘83, New Orleans, LA.
Kerr, A. D., 1976. “The bearing Capacity of Floating Ice Plates Subjected to Static or Quasi-Static Loads.” Journal of Glaciology, Vol. 17.
Kerr, A. D., 1978. “Forces an Ice Cover Exerts on Rows or Clusters of Piles Due to a Change of the Water Level.” Proc. IAHR Symp. on Ice, Part I, Lulea, Sweden.
Kerr, A. D., 1986. “Response of Floating Ice Beams and Plates with Partial Flooding.” Proceedings of the 1st International Conference on Ice Technology, Cambridge, MA.
Khalfin, J. S., 1990. Wave Forces on Offshore Platforms, Nedra, Moscow (in Russian).
Khanna, J. and Sorensen, T., 1980. “Stand-Off Force on Ships Moored in Strong Current.” Proceedings ASCE Specialty Conference PORTS ‘80, Norfolk, VA.
Kiedaisch, E., 1995. “Fender Systems in the 90’s and Beyond.” ASCE Proceedings Specialty Conference PIANC ‘85, Tampa, FL.
Kirkgöz, M. S., 1992. “Influence of Water Depth on the Breaking Wave Impact on Vertical and Sloping Walls.” Coastal Engineering, Vol. 18.
Kjeldgaard, J. H. and Carstens, T., 1980. “Thermal Ice Forces.” In the Special State-ofthe-Art Report 80–26, ed. T. Carstens. U.S. Army Corps of Engineers CRREL, Hanover, N.H.
Korzhavin, K. N., 1962. Action of Ice on ‘Engineering Structures, - USSR Academy of Science, Siberia. Translated from Russian by the U.S.’ Army CRREL in 1971, Hanover, NH.
Kry, P. R., 1978. “A Statistical Prediction of Effective Ice Crushing Stresses on Wide Structures. Proceedings lAHR Symposium on Ice Problems, Part 1,’ University of Lulea, Sweden.
Kry, P. R., 1980. “Ice Forces on Wide Structures.” Canadian Geotechnical Journal, Vol. 17, No. 1.
Laird, A. D. K., 1962. “Water Forces on Flexible Oscillating Cylinders.” ASCE Journal of the Waterways and Harbor Division, Vol. 88, No. WW3.
Lau, M. and Williams, F. M., 1991. “Model Ice Forces on a Downward Breakin Cone.” Proceedings the 11th International Conference on Ports and Ocean Engineering Under Arctic Conditions, St. John’s, Canada.
Lee, T. T., 1965. “A Hydraulic-Pneumatic Floating Fender.” Technical Report R334, U.S. Naval Civil Engineering Laboratory, Port Hueneme, CA.
Lee, T. T., 1966. “Hydraulic-Pneumatic Floating Fender.” Additional In-Service Tests, First Series, Technical Report R430, U.S. Naval Civil Engineering Laboratory, Port Hueneme, CA.
Lindstrom, C. A., 1990. “Numerical Estimation of Ice Forces Acting on Inclined Structures and Ships in Level Ice.” Proceedings Annual Offshore Technology Conference, Houston, TX, Paper OTG 6445.
Maccamy, R. C. and Fuchs, R. A., 1954. “Wave Forces on Piles: A Diffraction Theory.” U.S. Army Branch Erosion Board, Technical Memo, No 69, December.
Marcellus, R. W., Morrison, T. B., Allyn, N. F. B., Croasdale, K. R., IYER, H. S., and TSENG, J’., 1987, “Ice Forces on Marine Structures.” Report AES/SAG 1–2:88–5V2 Prepared for Ministry of Supply and Services, Canada, 1988.
Mazurkiewicz, B. K., 1995. “Shiplifts, Marine Railways,;,Shipways and ` Dry (Graving) Docks.” Marine Structures Engineering: Specialized Applications, by Tsinker, G. P., Chapman Hall, New York.’
Mccann, W. M. and Shah, H. C., 1979. “Determining Strong Motion Duration of Earthquakes.” Bulletin of the Seismological Society of America, Vol: 69.
Mcguire; R. K., 1974. “Seismic Structural Response Risk Analysis, Incorporating Peak Response Regressions on Earthquake Magnitude and Distance.” Research Report R74–51, Department of Civil Engineering, ‘MIT, Cambridge, MA.
Michel, B., 1970. “Off-Shore Mooring Structure for the Arctic.” IAHR Proceeding of Ice Symposium, Reykjavik, Iceland.
Michel, B., 1971. “Winter Regime in Rivers and Lakes.” U.S.’ Army Cold Regions Research and Engineering Laboratory Monograph I II, Hanover, NH.
Michel, B., 1978. “Ice Mechanics.” Les Presses de L’University, Laval, Quebec.
Michel, B. and Toussaint, N., 1977. “Mechanisms and Theory of Indentation of Ice Plates.” Journal of Glaciology, Vol. 19, No. 81.
Middendorf, P., 1981. “Fender Forces from Berthing Ships.” The Dock and Harbour Authority, October.
Minikin, R. R., 1963. Wind, Waves and Maritime Structures, 2nd ed., Griffin, London.
Mizoguchi, M. and Nakanayama, T., 1973. “Studies on the Berthing Velocities and Energy of the Ships.” Technical Note of Port and Harbour Research Institute, No. 170.
Mogridge, G. R. and Jamieson,’ W. W., 1976a. “Wave Loads on Large Circular Cylinders: A Design Method.” National Research Council. Hydraulic Laboratory, Ottawa, Canada.
Mogridge, G. R. and Jamieson, W. W., 1976b. “Design Method of the Estimation of Wave Loads on Square Caissons.” National Research Council of Canada Hydraulic Laboratory, Ottawa, Canada.
Mohraz, B., 1976. “A Study of Earthquake Response Spectra for Different Geological Conditions.” Bulletin of the Seismological Society of America, Vol. 66.
Mononobe, N., 1929. “Earthquake-Proof Construction ” of Masonry Dams “ Proceedings, World Engineering Conference, Vol. 9.
Mononobe, N. and Iviatsuo, H., 1929. “On Determination of Earth Pressure During Earthquakes.” Proceedings World Engineering Congress, Tokyo, Vol. 9.
Morrison, J. R., O’brien, M. P., Johnson, J. W., and Schaaf, S. A., 1950. The Force Exerted by Surface Waves on Piles.“ Petroleum Transaction Journal, Vol. 189.
Morrison, T. B. Marcellus, R. W., Ablyn, N. F. B., and Tseng, J., 1988. Ice Forces on Marine Structures, Vol. 1-Calculations, Ministry of Supply and Services, Ottawa, Canada.
Motora, S., 1959. On the Added Mass and Added Moment of Inertia of Hull Movement. Shipbuilding Association Reports Nos. 105 and 106 (in Japanese).
Murphy, J. R., Davis, A. H., and Weaver, N. L., 1971. `Amplification of Seismic Body Waves by Low Velocity Surface Layers.“ Bulletin of the Seismological Society of America, Vol. 61.
Nagasawa, J., 1959. “Study on Prevention of Damage to Ship Hull During Berthing.” Shipbuilding Association Report No. 106 (in Japanese).
Nato., 1965. Analytical Treatment of the Problems in the Berthing on a Mooring of Ships, NATO Advanced Study Institute/ASCE, New York.
Nato., 1973. Analytical Treatment of the Problems in the Berthing on a Mooring of Ships, NATO Advanced Study Institute, Wallingford, U.K
Nato., 1987. Advances in Berthing and Mooring of Ships and Offshore Structures, NATO Ad vanced Study Institute, Trondhiem, Norway.
Navfac, 1968. Harbour and Coastal Facilities, DM-26, Department of the Navy, WashingtonDC (Superceded by new series of point manuals.
Navfac, 1980. Piers and Wharves, DM-25.1, Department of the Navy, Naval Facilities Engineering Command, Alexandria, VA.
NavfacDM-26.2, 1982. Coastal Protection Design Manual 26.2. Department of the Navy, Naval Facilities Engineering Command, Alexandria, VA.
Navfac, 1986. “Fixed Moorings, DM-26.7” Department of the Navy, Naval Facilities Engineering Command, Alexandria, VA.
Neill, C. R., 1976. “Dynamic Ice Forces on Piers and Piles. An Assessment of Design Guidelines in the Light of Recent Research.” Canadian Journal of Civil Engineering, Vol 3, No 2.
Nevel, D. E., 1972. “The Ultimate Failure of Floating Ice Sheets.” Proceedings JAHR ICE Symposium, Leningrad.
Newman, J.N., 197. Marine Hydrodynamics,M.I.T. Press. Cambridge, MA.
Newmarx, N. M. and Hall, W. J., 1969. “Seismic Design Criteria for Nuclear Reactor Facilities.” Proceedings 4th World Conference on Earthquake Engineering. Santiago, Chile, Vol. B. 4.
Newmar.K, N. M. and Hall, W. J.,1982. Earthquake Spectra and Design,Earthquake Engineering Research Institute, Berkeley, CA.
Newmark, N. ` M., Blume,’ J. A., and Kapur, K. K, 1973. “Seismic Design Criteria for Nuclear Power Plants.” Journal of the Power Division, ASCE,Vol. 99.
Nigam, N. C. and Jennings, P. C., 1969. “Calculation of Response Spectra from Strong Motion Earthquake Records.” Bulletin of the Seismological Society of America, Vol. 59.
Nixon, W. A., Ettema, R., Matsuishi, M., and Johnson, B. C., 1993. “Model Study of Cable-Moored Conical Platform.” ASCE Journal of Cold Regions Engineering, Vol. 6, No. 1.
Nurrr’li, O. W. and Herrmann, R. B., 1982. “Earthquake Magnitude Scales.” JGT, Vol. 108.
Okabe, S., 1924. “General Theory on Earth Pressure and Seismic Stability of Retaining Wall and Dam.” Journal of Japan Society of Civil Engineers, Vol. 10.
Okabe, S., 1926. “General Theory on Earth Pressure.” Journal of the Japanese Society of Civil Engineers, Vol. 12, No. 1.
Oksanen, P., 1983. “Adhesion Strength of Ice.” Proceedings International Conference POAC, Vol. 2, Helsinki.
Otani, H., 1974. “A Study of the Berthing Impact of the Large Tanker ” Technical Note of Port and Harbour Research Institute No 176.
Padrou, D. V. (1994). Personal Communication, January 27.
Palo, P. A., 1983. “Steady Wind and Current Induced Loads on Moored Vessels.” Proceedings Offshore Technology Conference, Houston, TX, Paper 4530.
Permanent International Association of Navigation Congresses., 1984. “Ice Navigation.” Supplement to Bulletin No. 46.
Permanent International Association of Navigation Congresses., 1984. “Report of the International Commission for Improving the Design of Fender Systems.” Supplement to Bulletin No 45.
Permanent International’ Association OF Navigation Congresses., 1987. “Development of Modern Marine Terminals. Supplement to Bulletin 56.
Permanent International Association of Navigation Congresses., 1995(a). “Criteria ’ for Movements of Moored Ships in Harbours. A Practical Guide Supplement to Bulletin No. 88.
Permanent International Association OF Navigation Congresses., 1995(b). Letter by Administrative Director C. DeCraen to all Members of Pianc, 29 November.
Pjang, M. K., 1977. “Dynamic Response of Elevated Conveyor Structure.” ASCE Proceedings of Specialty Conference Ports ‘77. Long Beach, CA.
PiaseckyjP. J., 1977. Proceedings of the Twenty-Fourth PIANC Congress, Leningrad (updated in 1982). Paper SII-4.
Prakash, S., 1981. Soil Dynamics, McGraw-Hill Book Company, New York.
Prakash, S. and Basavanna, B. M., 1969. “Earth Pressure Distribution Behind Retaining Wall During Earthquake.” Proceedings 4th World Conference on Earthquake Engineering, Santiago, Chile, Vol. A. 5.
Quinn, A. D., 1972. Design and Construction of Ports and Marine Structures, McGraw-Hill Book Company, New York.
Rahman, M. and Chakravartty, I. C., 1986. “Design Method for Predicting Wave Forces on Rectangular Caissons.” ASCE Journal of Waterway Port and, Coastal Engineering, Vol. 112, No 6.
Ralston, T. D., 1977. “Yield Criteria for Ice Crushing Failure.” Ice Mechanics Workshop, Calgary, Alberta.
Ralston, T. D., 1979. “Ice Force Design Considerations for Conical Offshore Structures.” Proceedings of the Fifth International Conference POAC ‘79, Trondheim, Norway.
Resio, D. T. and Vincent, C. L., 1976. “Estimation of Winds Over the Great Lakes” (Final Report), MPH-76–12, U.S. Army Engineer Waterways Experiment Station, Vicksburg, Mississippi, June.
Richards, R. and Elms, D. G., 1979. “Seismic Behavior of Gravity Retaining Walls. Journal of Geotechnical Engineering,Vol. 105, No 4.
Richter, C. F., 1958. Elementary Seismology, W. H. Freeman,; New York.
Rogan, A. J., 1978. “Wave Forces on Piles.” The Dock and Harbour Authority, Vol. 59, No. 693.
Rupert, D., 1976. Zir Bemessung und Konstruktion von Fendern un Dalben, Mitteilungen des Franzius-Institute fur Wasserbau und Kusten Ingenieurs wesen aer Technische Universitat, Hannover.
Sackinger, W. M. and Sackinger, P. A., 1977. “Shear Strength of the Adfreeze Bond of Sea Ice to Structures.” Proceedings International Conference POAC, Vol. 2, St. John’s, Canada.
Saeki, H., ET AL. 1981. “Experimental Study of the Compressive Strength of Sea Ice and the Ice Forces on a Circular Pile.” Coastal Engineering, Vol. 19, December.
Sarpkaya, T., 1976. “Vortex Shedding and ‘Resistance in Harmonic Flow About Smooth and Rough Circular Cylinders.” Boss ‘76, Trodheim, Norway.
Sarpkaya, T. and Isaacson, M., 1981., Mechanics of Wave Forces on Offshore Structures, Van Nosfrand Reinhold Co., New York.
Sarpkaya, T., Collins, N. J., and Evans, S. R., 1977. “Wave Forces on Rough-Walled Cylinders at High Reynolds Numbers.” Offshore Technology Conference, Houston, TX, Paper 2901.
Saurin, B. F., 1963. “Berthing Forces of Large Tankers.” Proceedings Sixth World Petroleum Congress, Frankfurt, Section VII, Paper 10.
Seed, H. B. and Whitman, R. V., 1970. ’ “Design of Earth Retaining Structures for Dynamic Loads.” Proceedings ASCE Specialty Conference on Lateral Stresses in the Ground and Design of Earth Retaining Structures, Ithaca, NY, pp. 103–147.
Seed, H. B., Ugas, C., and Lysmer, J., 1976. “Site-Dependent Spectra for Earthquake Resistant Design.” Bulletin of the Seismological Society of America, Vol. 66.
Singh, S. K., Mena, E., and Castro, R., 1988. “Some Aspects of Source Characteristics of the 19 September 1985 Michoacan Earthquake and Ground Motion Amplification in and near Mexico City from Strong Motion Data.” Bulletin of the Seismological Society of America, Vol 78.
Slink, P. J. B., 1979. “Effect of Ship Movement on Container Handling Ropes.” The Dock and Harbour Authority, August.
Sodhi, D. S., 1995. “Breakthrough Loads of Floating Ice Sheets,” ASCE Journal of Cold Regions Engineering, Vol. 9,’ No 1, March.’
Sodhi, D. S. and Nevel, D. E., 1980. “A Review Of Bucking Analysis of Ice Sheets.” Working Group on Ice Forces on Structures. ‘A State-ofthe-Art Report. CRREL Special Report 80–26. Hanover, NH.
Songen, B., 1995. “The Effect of Wind on the Design of Canals.” Permanent International Association of Navigation Congresses, Bulletin No. 88.
Stammers, A. J. and Wennink, C. J., 1977. “Investigations of Vessel Mooring Subject to
Wave Action.“ The Dock and Harbour Authority, Vol. LVII, No. 677.
Starosolsky, O., 1970. “Ice in Hydraulic Engineering.” Norwegian Institute of Technology, Division of Hydraulic Engineering, Trondheim, Norway, Report N70–1.
Stelson, T. E., 1995. “Virtual Mass and Acceleration in Fluids.” Proceedings of the American Society of Civil Engineers, Vol. 81, No. 670.
Stevenson, J. D., Kennedy, R. P. and Hall, W._’ J., 1984. “Nuclear Power Plant Seismic Design-A Review of Selected Topics.” Nuclear Engineering and Design, Vol. 79.
Sundar, V., Neelamani, S., and Vendham, C. P., 1989. “Dynamic Pressures on a Large Vertical Cylinder due to Random Waves.” Coastal Engineering, Vol. 13.
Svendsen, I. A., 1970. “Measurement of Impact Energies on Fenders.” The Dock and Harbour Authority, September-October.
Swift, R. H., 1989. “Prediction of Breaking Force on Vertical Cylinders.” Coastal Engineering, Vol 13.
Thoresen, S. A., 1988. Port Design, Tapir Publishers, Troudheim, Norway.
Timco, G. W., 1987. ’ “Ice Forces on Multi-Legged Structures.” 3rd State-of-the-Art Report 87–17 by Working Group on Ice Forces, Sanderson, T. J. O., (ed ), U.S. Army CRREL Hanover NH.
Torum,’A., 1989. “Wave Forces on Pile in Surface Zone.” ASCE Journal of Waterway, Port, Coastal, Ocean Engineering, Vol 115. No 4.
Trifunac, M. D. and Anderson, J. G., 1978. “Preliminary Empirical Models for Scaling Pseudo Relative Velocity Spectra.” Methods for Prediction of Strong Earthquake Ground Motion, U.S. Nuclear Regulatory Commission, Report NUREG/CR-0689, A1 - A90.
Trifunac, M. D. and Brady, A. G., 1975. “A Study of the Duration of Strong Earthquake Ground Motion.” Bulletin of the Seismological Society of America, Vol. 65.
Tryde, P., 1989. “Ice Engineering.” Port Engineering, Bruun, P. (ed.), Gulf Publishing Company, Houston, TX.
Tsinker, G. P., 1986. Floating Ports, Gulf Publishing Company, Houston, TX.
Tsinker, G. P., 1995. Marine Structures Engineering: Specialized Applications, Chapman and Hall, New York.
Tsuchiya, Y. and Yamaguchi, M., 1974. “Total Wave Force on a Vertical Pile.” ASCE Proceedings 14th Coastal Engineering Conference, Vol. III.
Tyrell, B. G., 1966/1967. “Mooring Dolphins-Evaluation of Forces and Principles of Design.” The Dock and Harbour Authority,Vol. 47.
Udovichenko, V. N. and Yakovlev, P. I., 1976. Marine. Structures for Sea and Inland Ports, Transport Publishing House, Moscow (in Russian).
Ueda, S., 1981. “Study in Berthing Impact Force on Very Large Crude Oil Carriers.” Japanese Port and Harbour Research Institute, Vol. 20, No. 2.
Uniform Building Code., 1982. International Conference of Building Officials, Whittier, CA.
U.S. Army Corps OF _ Engineers., 1984. Shore Protection Manual. Department of the Army. Washington, DC.
U.S. Atomic Energy Commission., 1973. Design Response Spectral for Seismic Design of Nuclear Power Plants, Regulatory Guide 1.60, ` Directorate of Regulatory Standards, Washington, DC.
Usnrc., 1989. “Standard Review Plan for the Review of Safety Analysis Reports for Nuclear Power Plants, Section 2.5.2, Vibratory Ground Motion, (Revision 2).” NUREG-0800, Office of Nuclear Reactor Regulation,, Washington, DC.
Valentine, H. R., 1967. Applied Hydrodynamics, Butterworth, London.
Van Oortmerssen, G., 1974. “The Berthings of a Large Tanker to a Jetty.” Offshore Technology Conference, Houston, ° TX, Paper OTC 2100.
Van Oortmerssen, G., 1976. “The Motion of a Moored Ship in Waves.” Ph.D. Thesis, Delft University, The Netherlands.
Van Oortmerssen, G., 1986. “Computer Simulation of Modern Ship Behaviour.” Proceedings ASCE, Vol. 112, No. 2.
Van Te Chow., 1959. “Open-Channel Hydraulics,” McGraw-Hill Ryerson Ltd., New York, N.Y.
Vasco Costa, F., 1964. “The Berthing Ship.” The Dock and Harbour Authority, Vol. 45, Nos. 523, 524, and 525.
Vasco Costa, F., 1983. “Moored Ships as Oscillating Systems.” The Dock and Harbour Authority, February.
Viggosson, G., 1988. “Field Observatory of Ship Behaviour at Berth. Advances in Berthing and Mooring of Ships and Offshore Structures.” NATO, AS1 Series E, Applied Sciences, Vol. 146.
Wake, A., Poon, Y-K., and ‘Crissivian, R.,1987. “Ice Transport by Wind, Wave, and Currents.” ASCE Journal of Gold Regions Engineering.
Wang,’ S., 1975. “Dynamic Effects of Ship Passage on Moored Vessels.” Proceedings ASCE, Vol. 101,’° No WW3.
Wessels, E. and Kato’, K., 1989. “Ice Forces on Fixed and Floating Conical Structures.” Fourth Special State-of-the-Art Report 89–5. U.S. Army Corps of Engineers CRREL, Hanover, NH.
Whitman, R. V., 1990. “Seismic Design of Gravity Retaining Walls” ASCE, Proceedings Specialty Conference on Design and Performance of Earth Retaining Structures, Cornell University, Ithaca, NY.
Wiggins, J. H., 1964. “Effects of Site Conditions on Earthquake Intensity.” Journal of the Structural Division, Vol. 90.
Wilson, B. W., 1951. “Ship Response to Ranging in Harbour Basins.” Transaction of the ASCE.
Wilson, B. W., 1958. “The Energy Problems in the Mooring of Ship Exposed to Waves.” The Princeton University Conference on Berthing and Cargo Handling in Exposed Locations, Princeton, NJ.
Wilson, B. W., 1959. “A Case of Critical Surging of a Moored Ship.” Proceedings of the ASCE, Vol. 85, No. WW3.
Wilson, B. W., 1967. “Elastic Characteristics of Moorings.” ASCE Journal of the Waterways and Harbours Division, Vol. 93, No. WW4.
Wilson, B. W., Levinton, and Baker, 1958. “Berthing’ and Cargo Handling in Exposed Locations.” Proceedings of Princeton University Conference.
Wong, H. L. and Jennings, P. C., 1975. “Effects of Canyon Topography on Strong Ground Motion.” Bulletin of the Seismological Society of America, Vol. 65.
Wood, J. S., Khanna, J., and Dembinski, M., 1980. “Design of an Offshore Berth for Mooring Large Ships in a Strong Current.” Proceedings PIANC, 25th Congress Section II, Vol. 1. Edinburgh, UK.
Rights and permissions
Copyright information
© 1997 Springer Science+Business Media Dordrecht
About this chapter
Cite this chapter
Tsinker, G.P. (1997). Design Loads. In: Handbook of Port and Harbor Engineering. Springer, Boston, MA. https://doi.org/10.1007/978-1-4757-0863-9_3
Download citation
DOI: https://doi.org/10.1007/978-1-4757-0863-9_3
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4757-0865-3
Online ISBN: 978-1-4757-0863-9
eBook Packages: Springer Book Archive