Structural Adhesive Joints in Engineering

  • Robert D. Adams
  • William C. Wake

Table of contents

  1. Front Matter
    Pages i-ix
  2. Robert D. Adams, William C. Wake
    Pages 1-13
  3. Robert D. Adams, William C. Wake
    Pages 14-114
  4. Robert D. Adams, William C. Wake
    Pages 115-142
  5. Robert D. Adams, William C. Wake
    Pages 143-174
  6. Robert D. Adams, William C. Wake
    Pages 175-217
  7. Robert D. Adams, William C. Wake
    Pages 218-236
  8. Robert D. Adams, William C. Wake
    Pages 237-270
  9. Robert D. Adams, William C. Wake
    Pages 271-282
  10. Back Matter
    Pages 283-309

About this book

Introduction

The intention of this book is that it should contain everything an engineer needs to know to be able to design and produce adhesively bonded joints which are required to carry significant loads. The advan­ tages and disadvantages of bonding are given, together with a sufficient understanding of the necessary mechanics and chemistry to enable the designer to make a sound engineering judgement in any particular case. The stresses in joints are discussed extensively so that the engineer can get sufficient philosophy or feel for them, or can delve more deeply into the mathematics to obtain quantitative solutions even with elasto­ plastic behaviour. A critical description is given of standard methods of testing adhesives, both destructively and non-destructively. The essen­ tial chemistry of adhesives and the importance of surface preparation are described and guidance is given for adhesive selection by me ans of check lists. For many applications, there will not be a unique adhesive which alone is suitable, and factors such as cost, convenience, produc­ tion considerations or familiarity may be decisive. A list of applications is given as examples. The authors wish to increase the confidence of engineers using adhesive bonding in load-bearing applications by the information and experience presented. With increasing experience of adhesives en­ gineering, design will become more elegant as weH as more fitted to its products.

Keywords

Aluminium assembly elasticity mechanics metals

Authors and affiliations

  • Robert D. Adams
    • 1
  • William C. Wake
    • 2
  1. 1.University of BristolUK
  2. 2.The City UniversityLondonUK

Bibliographic information

  • DOI https://doi.org/10.1007/978-94-009-5616-2
  • Copyright Information Springer Science+Business Media B.V. 1984
  • Publisher Name Springer, Dordrecht
  • eBook Packages Springer Book Archive
  • Print ISBN 978-94-010-8977-7
  • Online ISBN 978-94-009-5616-2
  • About this book