Advertisement

7th RILEM International Conference on Cracking in Pavements

Mechanisms, Modeling, Testing, Detection and Prevention Case Histories

  • A. Scarpas
  • N. Kringos
  • I. Al-Qadi
  • Loizos A.

Part of the RILEM Bookseries book series (RILEM, volume 4)

Table of contents

  1. Front Matter
    Pages 1-18
  2. Mugurel I. Turos, Augusto Cannone Falchetto, Gabriele Tebaldi, Mihai O. Marasteanu
    Pages 11-20
  3. Ratiba Mitiche_Kettab, Azzouzi Boulanouar, Abderrahim Bali
    Pages 21-30
  4. M. Pettinari, C. Sangiorgi, F. Petretto, F. Picariello
    Pages 31-39
  5. R. Miró, A. Martínez, F. Pérez-Jiménez, R. Botella, G. Valdés
    Pages 61-69
  6. M. O. Hamzah, M. R. M. Hasan, M. F. C. van de Ven, J. L. M. Voskuilen
    Pages 71-81
  7. P. M. Muraya, C. Thodesen
    Pages 83-91
  8. O. M. Ogundipe, N. H. Thom, Andrew C. Collop, J. Richardson
    Pages 93-102
  9. Ebrahim Hesami, Denis Jelagin, Björn Birgisson, Niki Kringos
    Pages 103-113
  10. Enio F. Amorim, Antônio C. de Lara Fortes, Luís F. M. Ribeiro
    Pages 115-124
  11. Ken Grzybowski, Geoffrey M. Rowe, Stan Prince
    Pages 125-135
  12. Hussain Bahia, Hassan Tabatabaee, Raul Velasquez
    Pages 147-156
  13. John Laurent, Jean François Hébert, Daniel Lefebvre, Yves Savard
    Pages 157-167
  14. Yichang (James) Tsai, Chenglong Jiang, Zhaohua Wang
    Pages 169-178
  15. Jean-Michel Simonin, Cyrille Fauchard, Pierre Hornych, Vincent Guilbert, Jean-Pierre Kerzrého, Stéphane Trichet
    Pages 179-190
  16. Olivier Artières, Matteo Bacchi, Paolo Bianchini, Pierre Hornych, Gerrit Dortland
    Pages 201-210
  17. S. Pouget, C. Sauzéat, H. Di Benedetto, François Olard
    Pages 223-232
  18. A. L. Rolim, L. A. C. M. Veloso, H. N. C. Souza, P. L. de O. Filho, L. V. de A. Monteiro
    Pages 245-253
  19. Laszlo Petho, Csaba Toth
    Pages 267-275
  20. L. W. Cheung, P. K. Kong, Gordon L. M. Leung, W. G. Wong
    Pages 277-285
  21. Salman Hakimzadeh, Nathan Abay Kebede, William G. Buttlar
    Pages 287-297
  22. Ali Azhar Butt, Denis Jelagin, Björn Birgisson, Niki Kringos
    Pages 299-306
  23. David J. Mensching, Leslie Myers McCarthy, Jennifer Reigle Albert
    Pages 307-316
  24. Saori Ishihara, Kyoji Tanaka, Yasuji Shinohara
    Pages 317-326
  25. Dermot B. Casey, Andrew C. Collop, Gordon D. Airey, James R. Grenfell
    Pages 347-357
  26. M. R. M. Aliha, M. Ameri, A. Mansourian, M. R. Ayatollahi
    Pages 359-367
  27. Eyad Masad, Rashid Abu Al-Rub, Dallas N. Little
    Pages 399-408
  28. Yuchun Huang, Yichang (James) Tsai
    Pages 419-428
  29. Adelino Ferreira, Rui Micaelo, Ricardo Souza
    Pages 429-439
  30. Jorge Pais, Manuel Minhoto, Shakir Shatnawi
    Pages 441-452
  31. Gayle King, Mike Anderson, Doug Hanson, Phil Blankenship
    Pages 453-463
  32. Cheolmin Baek, Senganal Thirunavukkarasu, B. Shane Underwood, Murthy N. Guddati, Y. Richard Kim
    Pages 465-474
  33. M. Huurman, R. Gelpke, Maarten M. J. Jacobs
    Pages 475-486
  34. Arash Dehghan Banadaki, Murthy N. Guddati, Y. Richard Kim, Dallas N. Little
    Pages 487-496
  35. Mehran Eslaminia, Senganal Thirunavukkarasu, Murthy N. Guddati, Y. Richard Kim
    Pages 497-506
  36. Viktória Malárics, Harald S. Müller
    Pages 507-516

About these proceedings

Introduction

In the recent past, new materials, laboratory and in-situ testing methods and construction techniques have been introduced. In addition, modern computational techniques such as the finite element method enable the utilization of sophisticated constitutive models for realistic model-based predictions of the response of pavements. The 7th RILEM International Conference on Cracking of Pavements provided an international forum for the exchange of ideas, information and knowledge amongst experts involved in computational analysis, material production, experimental characterization, design and construction of pavements.

All submitted contributions were subjected to an exhaustive refereed peer review procedure by the Scientific Committee, the Editors and a large group of international experts in the topic. On the basis of their recommendations, 129 contributions which best suited the goals and the objectives of the Conference were chosen for presentation and inclusion in the Proceedings.

The strong message that emanates from the accepted contributions is that, by accounting for the idiosyncrasies of the response of pavement engineering materials, modern sophisticated constitutive models in combination with new experimental material characterization and construction techniques provide a powerful arsenal for understanding and designing against the mechanisms and the processes causing cracking and pavement response deterioration. As such they enable the adoption of truly "mechanistic" design methodologies.

The papers represent the following topics: Laboratory evaluation of asphalt concrete cracking potential; Pavement cracking detection;  Field investigation of pavement cracking; Pavement cracking modeling response, crack analysis and damage prediction; Performance of concrete pavements and white toppings; Fatigue cracking and damage characterization of asphalt concrete; Evaluation of the effectiveness of asphalt concrete modification; Crack growth parameters and mechanisms; Evaluation, quantification and modeling of asphalt healing properties; Reinforcement and interlayer systems for crack mitigation;  Thermal and low temperature cracking of pavements; and Cracking propensity of WMA and recycled asphalts.

Keywords

computational modeling cracking fatigue pavements pavements rilem

Editors and affiliations

  • A. Scarpas
    • 1
  • N. Kringos
    • 2
  • I. Al-Qadi
    • 3
  • Loizos A.
    • 4
  1. 1., Faculty of Civil Eng. & GeosciencesDelft University of TechnologyDelftNetherlands
  2. 2.KTH Royal Institute of TechnologyStockholmSweden
  3. 3.University of Illinois Urbana ChampaignUrbanaUSA
  4. 4., Laboratory of Highway EngineeringNational Technical University of AthensAthensGreece

Bibliographic information

Industry Sectors
Pharma
Materials & Steel
Automotive
Chemical Manufacturing
Biotechnology
Electronics
Consumer Packaged Goods
Energy, Utilities & Environment
Aerospace
Oil, Gas & Geosciences
Engineering