Production at the leading edge of technology

Proceedings of the 9th Congress of the German Academic Association for Production Technology (WGP), September 30th - October 2nd, Hamburg 2019

  • Jens Peter Wulfsberg
  • Wolfgang Hintze
  • Bernd-Arno Behrens
Conference proceedings

Table of contents

  1. Front Matter
    Pages I-XI
  2. Forming Machine Tools and Manufacturing Processes

    1. Front Matter
      Pages 13-14
    2. Uwe Böhmichen, Tim Lehnert, Nadine Schubert, André Wagner, Andreas Sterzing, Reinhard Mauermann
      Pages 15-24
    3. Yves Kuche, Dennis Siebel, Julian Polte, Mitchel Polte, Eckart Uhlmann
      Pages 25-32
    4. Nikolaos Rigas, Friedhelm Junker, Erik Berendt, Marion Merklein
      Pages 43-51
    5. Philipp Kuwert, Kai Brunotte, Bernd-Arno Behrens
      Pages 53-61
    6. Philipp Müller, Daniel Rosenbusch, Jörn Wehmeyer, Sven Hübner, Bernd-Arno Behrens
      Pages 73-81
    7. Andreas Jobst, Christoph Kiener, Marion Merklein
      Pages 83-92
    8. André Höber, Bernd-Arno Behrens, Richard Krimm
      Pages 93-101
    9. David Briesenick, Mathias Liewald, Ranko Radonjic, Celalettin Karadogan
      Pages 111-120
    10. Stefan Fries, Thang Nguyen, Levent Altan, Dietmar Friesen, Richard Krimm, Bernd-Arno Behrens
      Pages 121-129
    11. Jonas Nieschlag, Paul Ruhland, Sven Coutandin, Jürgen Fleischer
      Pages 131-138
    12. Norman Heimes, Florian Pape, Gerhard Poll, Dennis Konopka, Simon Schöler, Kai Möhwald et al.
      Pages 139-148
    13. Matthias Konrad Werner, Daniel Maier, Simon Vitzthum, Carsten Intra, Wolfram Volk
      Pages 149-157
    14. Eugen Stockburger, Hendrik Wester, Johanna Uhe, Kai Brunotte, Bernd-Arno Behrens
      Pages 159-168
    15. Maik Linnemann, Verena Psyk, Christian Scheffler, Welf-Guntram Drossel
      Pages 179-188
    16. Serdal Acar, Oleksandr Golovko, Mark A. Swider, Florian Nuernberger, Martin Siegmund, Jan Puppa et al.
      Pages 189-196
    17. Johanna Uhe, Bernd-Arno Behrens
      Pages 199-208
    18. Juergen A. Nietsch, Jan E. Menzler, Stephan Hojda, Wolfgang Lenz, Marco Teller, Herbert Pfeifer et al.
      Pages 209-218
    19. Julian Diefenbach, Tim Matthias, Kai Brunotte, Bernd-Arno Behrens
      Pages 229-238
    20. Felix Flegler, Peter Groche, Tim Abraham, Günter Bräuer
      Pages 239-247
  3. Cutting Machine Tools and Manufacturing Methods

    1. Front Matter
      Pages 248-248
    2. Simon Roßkamp, Eckart Uhlmann, Robert Hofmann, Sophie Gröger
      Pages 249-258
    3. Katja Klauer, Matthias Eifler, Benjamin Kirsch, Jörg Seewig, Jan C. Aurich
      Pages 259-268
    4. Kim Torben Werkle, Walther Maier, Hans-Christian Möhring
      Pages 269-275
    5. René Wulfsberg, Hendrik Rentzsch, Oliver Georgi, Gunnar Meichsner, Willy Peter, Jan Edelmann
      Pages 277-286
    6. Daniel Weber, Benjamin Kirsch, Christopher R. D’Elia, Barbara S. Linke, Michael R. Hill, Jan C. Aurich
      Pages 287-296
    7. Jannis Saelzer, Andreas Zabel, Dirk Biermann
      Pages 297-305
    8. Kristin Kropidlowski, Daniel Hinzmann, Eckart Uhlmann, Géraldine Thomas Gradt
      Pages 307-316
    9. Sarah Eschelbacher, Jonas Duntschew, Hans-Christian Möhring
      Pages 317-325
    10. Pulkit Rana, Waldemar Zielasko, Thomas Schuster, Wolfgang Hintze
      Pages 337-346
  4. Automated Assembly and Robotics

    1. Front Matter
      Pages 358-358
    2. Thorsten Mattulat, Helge Kügler, Frank Vollertsen
      Pages 359-368
    3. Michael Miro, Miguel Angel Villanueva Portela, Bernd Kuhlenkötter
      Pages 369-377
    4. Mathias Sebastian Palm, André Chandelle, Fabian Riss, Michael F. Zaeh
      Pages 379-388
    5. Paul Bobka, Felix Gabriel, Martin Römer, Thomas Engbers, Markus Willgeroth, Klaus Dröder
      Pages 389-399
    6. Johannes von Lindenfels, Marco Ziegler, Maximilian Kneidl, Alexander Kuehl, Joerg Franke
      Pages 411-420
    7. Marius Krug, Johanna Ays, Frederick Sauermann, Jan-Philipp Prote, GüCnther Schuh
      Pages 421-430
    8. Florian Hefner, Meike Herbert, Martin Sjarov, Robert Süß-Wolf, Jörg Franke
      Pages 431-439
    9. Niclas Hoffmann, Andreas Argubi-Wollesen, Christine Linnenberg, Robert Weidner, Jörg Franke
      Pages 441-450
    10. Christian Baier, Felix Hähn, Cornelia Tepper, Matthias Weigold
      Pages 451-460
  5. Machine Learning

    1. Front Matter
      Pages 462-462

About these proceedings


The focus of the Congress will be leading-edge manufacturing processes. Topics include manufacturing at extreme speed, size, accuracy, methodology, use of resources, interdisciplinarity and more. Contributions from production and industrial engineering are welcome. Challenges from the areas of manufacturing, machines and production systems will be addressed. 

Production research constantly pushes the boundaries of what is feasible. The Congress "Production at the leading edge of technology" will highlight production processes that are advancing into areas that until recently were considered unfeasible, also in terms of methodology, use of resources and interdisciplinarity.

But where does the search for new limits lead? Which limitations do we still have to overcome, which ones do we not want to overcome?

The aim of the German-speaking colloquium is to establish connections between the research locations and to intensify the overall transfer of results and experience with industrial users.


Manufacturing Technology Production Engineering Material Science Simulation Machine Technology Industry 4.0 Process Management

Editors and affiliations

  • Jens Peter Wulfsberg
    • 1
  • Wolfgang Hintze
    • 2
  • Bernd-Arno Behrens
    • 3
  1. 1.Laboratorium for Manufacturing TechnologyHamburgGermany
  2. 2.Institute of Production Management and TechnologyHamburgGermany
  3. 3.Institute of Forming Technology and MachinesGarbsenGermany

Bibliographic information

Industry Sectors
Materials & Steel
Chemical Manufacturing
Oil, Gas & Geosciences