Advertisement

Informatics in Control, Automation and Robotics

Revised and Selected Papers from the International Conference on Informatics in Control, Automation and Robotics 2010

  • Juan Andrade Cetto
  • Jean-Louis Ferrier
  • Joaquim Filipe

Part of the Lecture Notes in Electrical Engineering book series (LNEE, volume 89)

Table of contents

  1. Front Matter
  2. Invited Papers

    1. Front Matter
      Pages 1-1
    2. Oleg Gusikhin, Erica Klampfl, Dimitar Filev, Yifan Chen
      Pages 21-36
    3. Tom Grieve, Yu Sun, John M. Hollerbach, Stephen A. Mascaro
      Pages 37-48
  3. Part I: Intelligent Control Systems and Optimization

    1. Front Matter
      Pages 49-49
    2. Teodor Lucian Grigorie, Andrei Vladimir Popov, Ruxandra Mihaela Botez, Mahmoud Mamou, Youssef Mébarki
      Pages 51-76
    3. Sven Tomforde, Björn Hurling, Jörg Hähner
      Pages 91-104
    4. Nicola Greggio, Alexandre Bernardino, José Santos-Victor
      Pages 105-120
    5. Ahmed Mekki, Mohamed Ghazel, Armand Toguyéni
      Pages 121-134
    6. Heath LeBlanc, Emeka Eyisi, Nicholas Kottenstette, Xenofon Koutsoukos, Janos Sztipanovits
      Pages 135-149
  4. Part II: Robotics and Automation

    1. Front Matter
      Pages 151-151
    2. Michael Brunner, Dirk Schulz, Armin B. Cremers
      Pages 153-169
    3. Stefan Lichiardopol, Nathan van de Wouw, Henk Nijmeijer
      Pages 197-210
    4. Oliver Kroemer, Renaud Detry, Justus Piater, Jan Peters
      Pages 211-223
    5. Alejandro Alvarez-Aguirre, Nathan van de Wouw, Toshiki Oguchi, Kotaro Kojima, Henk Nijmeijer
      Pages 225-238
    6. Michele Folgheraiter, Mathias Jordan, Luis M. Vaca Benitez, Felix Grimminger, Steffen Schmidt, Jan Albiez et al.
      Pages 239-252
    7. Ana Cristina Palacios-García, Angélica Muñoz-Meléndez, Eduardo F. Morales
      Pages 253-265
    8. Dora Luz Almanza-Ojeda, Michel Devy, Ariane Herbulot
      Pages 267-280
  5. Part III: Signal Processing, Systems Modeling and Control

  6. Back Matter

About these proceedings

Introduction

The present book includes a set of selected papers from the seventh "International Conference on Informatics in Control Automation and Robotics"

(ICINCO 2010), held in Madeira, Portugal, from 15 to 18 June 2010. The conference was organized in three simultaneous tracks: "Intelligent Control Systems and Optimization", "Robotics and Automation" and "Signal Processing, Systems Modeling and Control". The book is based on the same structure.

 

ICINCO received 320 paper submissions, not including those of workshops or special sessions, from 57 countries, in all continents. After a double blind paper review performed by the Program Committee only 27 submissions were accepted as full papers and thus selected for oral presentation, leading to a full paper acceptance ratio of 8%. Additional papers were accepted as short papers and posters. A further refinement was made after the conference, based also on the assessment of presentation quality, so that this book includes the extended and revised versions of the very best papers of ICINCO 2010.

 

Commitment to high quality standards is a major concern of ICINCO that will be maintained in the next editions of this conference, including not only the stringent paper acceptance ratios but also the quality of the program committee, keynote lectures, workshops and logistics.

Keywords

Control Automation ICINCO Informatics Robotics

Editors and affiliations

  • Juan Andrade Cetto
    • 1
  • Jean-Louis Ferrier
    • 2
  • Joaquim Filipe
    • 3
  1. 1.Institut Robotica i Informatica IndustrialUniv. Politecnica CatalunyaBarcelonaSpain
  2. 2.Labo. d’Ingénierie des Systémes Automatisés (LISA)Institut des Sciences et Techniques de l’Ingénieur d’Angers (ISTIA)AngersFrance
  3. 3.Polytechnic Institute of Setúbal / INSTICCSetubalPortugal

Bibliographic information

  • DOI https://doi.org/10.1007/978-3-642-19539-6
  • Copyright Information Springer Berlin Heidelberg 2011
  • Publisher Name Springer, Berlin, Heidelberg
  • eBook Packages Engineering
  • Print ISBN 978-3-642-19538-9
  • Online ISBN 978-3-642-19539-6
  • Series Print ISSN 1876-1100
  • Series Online ISSN 1876-1119
  • Buy this book on publisher's site
Industry Sectors
Pharma
Materials & Steel
Automotive
Biotechnology
Electronics
IT & Software
Telecommunications
Energy, Utilities & Environment
Aerospace
Oil, Gas & Geosciences
Engineering