Convective Heat Transfer From Rotating Disks Subjected To Streams Of Air

  • Stefan aus der Wiesche
  • Christian Helcig

Part of the SpringerBriefs in Applied Sciences and Technology book series (BRIEFSAPPLSCIENCES)

Also part of the SpringerBriefs in Thermal Engineering and Applied Science book sub series (BRIEFSTHERMAL)

Table of contents

  1. Front Matter
    Pages i-xiv
  2. Stefan aus der Wiesche, Christian Helcig
    Pages 1-4
  3. Stefan aus der Wiesche, Christian Helcig
    Pages 5-16
  4. Stefan aus der Wiesche, Christian Helcig
    Pages 17-28
  5. Stefan aus der Wiesche, Christian Helcig
    Pages 29-40
  6. Stefan aus der Wiesche, Christian Helcig
    Pages 41-55
  7. Stefan aus der Wiesche, Christian Helcig
    Pages 57-77
  8. Stefan aus der Wiesche, Christian Helcig
    Pages 79-94
  9. Stefan aus der Wiesche, Christian Helcig
    Pages 95-103
  10. Back Matter
    Pages 105-107

About this book

Introduction

This Brief describes systematically results of research studies on a series of convective heat transfer phenomena from rotating disks in air crossflow. Phenomena described in this volume were investigated experimentally using an electrically heated disk placed in the test section of a wind tunnel. The authors describe findings in which transitions between different heat transfer regimes can occur in dependency on the involved Reynolds numbers and the angle of incidence, and that these transitions could be related to phenomenological Landau and Landau-de Gennes models. The concise volume closes a substantial gap in the scientific literature with respect to flow and heat transfer in rotating disk systems and provides a comprehensive presentation of new and recent results not previously published in book form.

Keywords

Angle of Incidence Convective Heat Transfer Flow Separation Large Eddy Simulation Rotating Disk

Authors and affiliations

  • Stefan aus der Wiesche
    • 1
  • Christian Helcig
    • 2
  1. 1.Department of Mechanical EngineeringMuenster University of Applied SciencesSteinfurtGermany
  2. 2.Department of Mechanical EngineeringMuenster University of Applied SciencesSteinfurtGermany

Bibliographic information

  • DOI https://doi.org/10.1007/978-3-319-20167-2
  • Copyright Information The Author(s) 2016
  • Publisher Name Springer, Cham
  • eBook Packages Engineering
  • Print ISBN 978-3-319-20166-5
  • Online ISBN 978-3-319-20167-2
  • Series Print ISSN 2191-530X
  • Series Online ISSN 2191-5318
  • About this book
Industry Sectors
Pharma
Materials & Steel
Automotive
Chemical Manufacturing
Biotechnology
Electronics
Energy, Utilities & Environment
Aerospace
Oil, Gas & Geosciences
Engineering