Solder Joint Reliability Assessment

Finite Element Simulation Methodology

  • Mohd N. Tamin
  • Norhashimah M. Shaffiar

Part of the Advanced Structured Materials book series (STRUCTMAT, volume 37)

Table of contents

  1. Front Matter
    Pages i-xiii
  2. Mohd N. Tamin, Mohd N. Tamin
    Pages 1-6
  3. Mohd N. Tamin, Norhashimah M. Shaffiar
    Pages 7-21
  4. Mohd N. Tamin, Norhashimah M. Shaffiar
    Pages 23-43
  5. Mohd N. Tamin, Norhashimah M. Shaffiar
    Pages 45-73
  6. Mohd N. Tamin, Norhashimah M. Shaffiar
    Pages 75-85
  7. Mohd N. Tamin, Norhashimah M. Shaffiar
    Pages 87-116
  8. Mohd N. Tamin, Norhashimah M. Shaffiar
    Pages 117-136
  9. Mohd N. Tamin, Norhashimah M. Shaffiar
    Pages 137-151
  10. Mohd N. Tamin, Norhashimah M. Shaffiar
    Pages 153-171
  11. Back Matter
    Pages 173-174

About this book

Introduction

This book presents a systematic approach in performing reliability assessment of solder joints using Finite Element (FE) simulation. Essential requirements for FE modelling of an electronic package or a single reflowed solder joint subjected to reliability test conditions are elaborated. These cover assumptions considered for a simplified physical model, FE model geometry development, constitutive models for solder joints and aspects of FE model validation. Fundamentals of the mechanics of solder material are adequately reviewed in relation to FE formulations. Concept of damage is introduced along with deliberation of cohesive zone model and continuum damage model for simulation of solder/IMC interface and bulk solder joint failure, respectively. Applications of the deliberated methodology to selected problems in assessing reliability of solder joints are demonstrated.  These industry-defined research-based problems include solder reflow cooling, temperature cycling and mechanical fatigue of a BGA package, JEDEC board-level drop test and mechanisms of solder joint fatigue. Emphasis is placed on accurate quantitative assessment of solder joint reliability through basic understanding of the mechanics of materials as interpreted from results of FE simulations. The FE simulation methodology is readily applicable to numerous other problems in mechanics of materials and structures.

Keywords

Ball Grid Array BGA Cohesive Zone Model Continuum Damage Model Damage Mechanics Fatigue Life Prediction Numerical Experiment Framework Temperature Cycles Unified Inelastic Strain Model

Authors and affiliations

  • Mohd N. Tamin
    • 1
  • Norhashimah M. Shaffiar
    • 2
  1. 1.Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, 81310 UTM SkudaiJohor BahruMalaysia
  2. 2.Department of Manufacturing and Materials, Kulliyyah of Engineering, International Islamic University Malaysia, 53100 GombakKuala LumpurMalaysia

Bibliographic information

  • DOI https://doi.org/10.1007/978-3-319-00092-3
  • Copyright Information Springer International Publishing Switzerland 2014
  • Publisher Name Springer, Cham
  • eBook Packages Chemistry and Materials Science
  • Print ISBN 978-3-319-00091-6
  • Online ISBN 978-3-319-00092-3
  • Series Print ISSN 1869-8433
  • Series Online ISSN 1869-8441
  • About this book
Industry Sectors
Pharma
Automotive
Chemical Manufacturing
Biotechnology
Electronics
Consumer Packaged Goods
Energy, Utilities & Environment
Aerospace
Oil, Gas & Geosciences
Engineering