Advertisement

© 2020

Advances in Design, Simulation and Manufacturing III

Proceedings of the 3rd International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2020, June 9-12, 2020, Kharkiv, Ukraine – Volume 2: Mechanical and Chemical Engineering

  • Vitalii Ivanov
  • Ivan Pavlenko
  • Oleksandr Liaposhchenko
  • José Machado
  • Milan Edl
Conference proceedings DSMIE 2020

Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Table of contents

  1. Front Matter
    Pages i-xix
  2. Mechanics of Solids and Structures

    1. Front Matter
      Pages 1-1
    2. Artem Karaiev, Elena Strelnikova
      Pages 3-13
    3. Aleksandr Litvinenko, Yuriy Boyko, Bohdan Pashchenko, Yuriy Sukhenko, Evhenii Shtefan
      Pages 24-31
    4. Olena Mikulich, Lyudmila Samchuk, Yulia Povstiana
      Pages 32-41
    5. Anatolii Panchenko, Angela Voloshina, Olena Titova, Igor Panchenko, Anatoly Caldare
      Pages 42-51
    6. Oleksandr Petrov, Andrii Slabkyi, Inna Vishtak, Leonid Kozlov
      Pages 52-62
    7. Sergiy Pylypaka, Tatiana Volina, Mikola Mukvich, Galina Efremova, Olena Kozlova
      Pages 63-73
    8. Massimo Sicilia, Marco Claudio De Simone
      Pages 74-84
    9. Andrii Rogovyi, Serhii Khovanskyi, Iryna Hrechka, Anatoly Gaydamaka
      Pages 85-94
    10. Ihor Sydorenko, Vladimir Tonkonogyi, Yuliia Babych, Yuliia Barchanova, Zhang Yiheng
      Pages 95-104
  3. Numerical Simulation of Coupled Problems

    1. Front Matter
      Pages 117-117
    2. Aleksandr Dykha, Ruslan Sorokatyi, Volodymyr Dytyniuk
      Pages 119-128
    3. Oleg Khoroshylov, Oleg Podolyak, Valentina Kuryliak, Andrey Kipensky, Andrey Lomakin
      Pages 129-138
    4. Vladimir Klimenko, Iryna Shuda, Tetyana Zhylenko
      Pages 139-149
    5. Stephan Loskutov, Dmytro Pavlenko, Dmytro Stepanov, Natalia Honchar, Olena Khavkina
      Pages 150-158
    6. Brian Maxwell, Konstyantyn Korytchenko, Olga Shypul
      Pages 169-178

Other volumes

  1. Advances in Design, Simulation and Manufacturing III
    Proceedings of the 3rd International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2020, June 9-12, 2020, Kharkiv, Ukraine – Volume 2: Mechanical and Chemical Engineering
  2. Proceedings of the 3rd International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2020, June 9-12, 2020, Kharkiv, Ukraine – Volume 1: Manufacturing and Materials Engineering

About these proceedings

Introduction

This book explores topics at the interface between mechanical and chemical engineering, with a focus on design, simulation, and manufacturing. Covering recent developments in the mechanics of solids and structures; numerical simulation of coupled problems, including wearing, compression, detonation and collision; and chemical process technologies, including ultrasonic technology, capillary rising process, pneumatic classification, membrane electrolysis and absorption processes, it reports on developments in the field of heat and mass transfer, energy-efficient technologies, and industrial ecology. Part of a two-volume set based on the 3rd International Conference on Design, Simulation, Manufacturing:  The Innovation Exchange (DSMIE-2020), held on June 9-12, 2020, in Kharkiv, Ukraine, this book provides academics and professionals with extensive information on the latest trends, technologies and challenges in the field as well as practical lessons learned.

Keywords

Numerical Simulation of Coupled Problems Design of Hydraulic Systems Hydraulic Mechatronic Systems Models of Hydraulic Drives Car Dynamic Models Liquid Sloshing Magnetic Water Treatment Eco-Friendly Bio-utilization Two-phase Heat Transfer Model Design of Cooling Systems Ultrasonic Vibrations Active Hydrodynamic Regimes Vibration Extraction Technologies Models of Energy Consumption Pneumatic Classification Process DSMIE 2020

Editors and affiliations

  • Vitalii Ivanov
    • 1
  • Ivan Pavlenko
    • 2
  • Oleksandr Liaposhchenko
    • 3
  • José Machado
    • 4
  • Milan Edl
    • 5
  1. 1.Sumy State UniversitySumyUkraine
  2. 2.Sumy State UniversitySumyUkraine
  3. 3.Sumy State UniversitySumyUkraine
  4. 4.University of MinhoGuimaraesPortugal
  5. 5.University of West BohemiaPilsenCzech Republic

Bibliographic information

  • Book Title Advances in Design, Simulation and Manufacturing III
  • Book Subtitle Proceedings of the 3rd International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2020, June 9-12, 2020, Kharkiv, Ukraine – Volume 2: Mechanical and Chemical Engineering
  • Editors Vitalii Ivanov
    Ivan Pavlenko
    Oleksandr Liaposhchenko
    José Machado
    Milan Edl
  • Series Title Lecture Notes in Mechanical Engineering
  • Series Abbreviated Title Lect.Notes Mechanical Engineering
  • DOI https://doi.org/10.1007/978-3-030-50491-5
  • Copyright Information The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Switzerland AG 2020
  • Publisher Name Springer, Cham
  • eBook Packages Engineering Engineering (R0)
  • Softcover ISBN 978-3-030-50490-8
  • eBook ISBN 978-3-030-50491-5
  • Series ISSN 2195-4356
  • Series E-ISSN 2195-4364
  • Edition Number 1
  • Number of Pages XIX, 407
  • Number of Illustrations 93 b/w illustrations, 109 illustrations in colour
  • Topics Mechanical Engineering
    Industrial Chemistry/Chemical Engineering
    Engineering Design
  • Buy this book on publisher's site
Industry Sectors
Automotive
Chemical Manufacturing
Electronics
Consumer Packaged Goods
Pharma
Materials & Steel
Energy, Utilities & Environment
Aerospace
Oil, Gas & Geosciences
Engineering