Skip to main content
SpringerLink
Log in
Book cover
  • Conference proceedings
  • © 2020

Advances in Additive Manufacturing, Modeling Systems and 3D Prototyping

Proceedings of the AHFE 2019 International Conference on Additive Manufacturing, Modeling Systems and 3D Prototyping, July 24-28, 2019, Washington D.C., USA

Editors:

  1. Massimo Di Nicolantonio

    1. Architecture Department, University of Chieti-Pescara, Pescara, Italy

    View editor publications

    You can also search for this editor in PubMed   Google Scholar

  2. Emilio Rossi

    1. Emilio Rossi Design Consulting, Ortona, Italy

    View editor publications

    You can also search for this editor in PubMed   Google Scholar

  3. Thomas Alexander

    1. Bonn, Germany

    View editor publications

    You can also search for this editor in PubMed   Google Scholar

  • Describes cutting-edge digital modeling systems
  • Give emphasis to sustainability issues and developing economies
  • Covers additive manufacturing research and practice

Part of the book series: Advances in Intelligent Systems and Computing (AISC, volume 975)

Conference series link(s): AHFE: International Conference on Applied Human Factors and Ergonomics

Conference proceedings info: AHFE 2019.

Sections

Buy it now

eBook USD 169.00
Price excludes VAT (USA)
  • Available as EPUB and PDF
  • Read on any device
  • Instant download
  • Own it forever
Softcover Book USD 219.99
Price excludes VAT (USA)
  • Compact, lightweight edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Other ways to access

This is a preview of subscription content, log in via an institution to check for access.

Table of contents (61 papers)

  1. Front Matter

    Pages i-xvii
    PDF

  2. Design and Innovation for 3D Printing

    1. Front Matter

      Pages 1-1
      PDF

    2. Sustainable 3D Printing: Design Opportunities and Research Perspectives

      • Emilio Rossi, Massimo Di Nicolantonio, Paola Barcarolo, Jessica Lagatta
      Pages 3-15

    3. 3D Printing to Innovate the Guitar Design

      • Antonio Marano
      Pages 16-23

    4. Italian Manufacture Between Technological and Social Innovation

      • Elisabetta Cianfanelli, Eleonora Trivellin, Marco Marseglia, Margherita Tufarelli, Gabriele Goretti
      Pages 24-34

    5. Evaluation of Early-Age Concrete Structural Build-Up for 3D Concrete Printing by Oscillatory Rheometry

      • Wilson Ricardo Leal da Silva, Hervé Fryda, Jean-Noël Bousseau, Pierre-Antoine Andreani, Thomas J. Andersen
      Pages 35-47

    6. Artisan as a Maker or Artisan as a not Recognized Co-designer?

      • Gabriele Goretti, Elisabetta Cianfanelli, Benedetta Terenzi, Margherita Tufarelli, Eleonora Trivellin
      Pages 48-59

    7. Ma(r)kers: Digital Fabrication as Opportunity for Enhancing Territories Through Hacking, Personalization, Traces

      • Raffaella Fagnoni, Xavier Ferrari Tumay, Annapaola Vacanti, Andrea Vian
      Pages 60-70

  3. 3D Printing Technology

    1. Front Matter

      Pages 81-81
      PDF

    2. 3D Printed Hybrid Flexible Electronics with Direct Light Synthesis

      • Andrei Popa, Brian Zellers, Simon Iversen, Dillon Kennedy, Pedro Cortes, Lars Duggen et al.
      Pages 83-92

    4. Automatic Design of 3D Lightweight Structures Based on Finite Element Mesh

      • Keun Park, Young-Eun Lim, Jung-Hwan Park
      Pages 100-107

  4. Research on 3D Printing, Design and Digital Modeling

    1. Front Matter

      Pages 129-129
      PDF

    2. Parametric Design of Applied Origami with a Synthetic Computational Approach

      • Fabrizio Ivan Apollonio, Federico Fallavollita, Riccardo Foschi
      Pages 131-142

    3. Generative Design for Printable Mass Customization Jewelry Products

      • Massimo Di Nicolantonio, Emilio Rossi, Paride Stella
      Pages 143-152

    4. Application of Robust Design Techniques for 3D Printing on Textiles

      • Martijn ten Bhömer, Derrick Tate, Shixuan Wang, Filippo Campanile, Yaoyu Chen
      Pages 153-165

  5. Algorithmic Design and Rapid Prototyping for Cultural Heritage

    1. Front Matter

      Pages 167-167
      PDF
Back to top

Other Volumes

  1. Advances in Affective and Pleasurable Design

  2. Advances in Neuroergonomics and Cognitive Engineering

  3. Advances in Design for Inclusion

  4. Advances in Ergonomics in Design

  5. Advances in Human Error, Reliability, Resilience, and Performance

  6. Advances in Human Factors and Ergonomics in Healthcare and Medical Devices

  7. Advances in Human Factors and Simulation

  8. Advances in Human Factors and Systems Interaction

  9. Advances in Human Factors in Cybersecurity

  10. Advances in Human Factors, Business Management and Leadership

  11. Advances in Human Factors in Robots and Unmanned Systems

  12. Advances in Human Factors in Training, Education, and Learning Sciences

  13. Advances in Artificial Intelligence, Software and Systems Engineering

  14. Advances in Human Factors in Architecture, Sustainable Urban Planning and Infrastructure

  15. Advances in Physical Ergonomics and Human Factors

  16. Advances in Interdisciplinary Practice in Industrial Design

  17. Advances in Safety Management and Human Factors

  18. Advances in Social and Occupational Ergonomics

  19. Advances in Manufacturing, Production Management and Process Control

  20. Advances in Usability and User Experience

  21. Advances in Human Factors in Wearable Technologies and Game Design

  22. Advances in Additive Manufacturing, Modeling Systems and 3D Prototyping

Back to top

About this book

This book discusses the latest advances in digital modeling systems (DMSs) and additive manufacturing (AM) technologies. It covers applications of networked technologies, ubiquitous computing, new materials and hybrid production systems, discussing how they are changing the processes of conception, modeling and production of products and systems of product. The book emphasizes ergonomic and sustainability issues, as well as timely topics such as DMSs and AM in Industry 4.0, DMSs and AM in developing countries, DMSs and AM in extreme environments, thus highlighting future trends and promising scenarios for further developing those technologies. Based on the AHFE 2019 International Conference on Additive Manufacturing, Modeling Systems and 3D Prototyping, held on July 24-28, 2019, in Washington D.C., USA, the book is intended as source of inspiration for researchers, engineers and stakeholders, and to foster interdisciplinary and international collaborations between them.

Back to top

Keywords

Back to top

Editors and Affiliations

  • Architecture Department, University of Chieti-Pescara, Pescara, Italy

    Massimo Di Nicolantonio

  • Emilio Rossi Design Consulting, Ortona, Italy

    Emilio Rossi

  • Bonn, Germany

    Thomas Alexander

Back to top

Bibliographic Information

Back to top

Publish with us

Policies and ethics

Back to top
Access via your institution

Buy it now

eBook USD 169.00
Price excludes VAT (USA)
  • Available as EPUB and PDF
  • Read on any device
  • Instant download
  • Own it forever
Softcover Book USD 219.99
Price excludes VAT (USA)
  • Compact, lightweight edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Other ways to access

Search

Navigation