Advertisement

RILEM Technical Committee 195-DTD Recommendation for Test Methods for AD and TD of Early Age Concrete

Round Robin Documentation Report: Program, Test Results and Statistical Evaluation

  • Øyvind Bjøntegaard
  • Tor Arne Martius-Hammer
  • Matias Krauss
  • Harald Budelmann
Book

Part of the RILEM State-of-the-Art Reports book series (RILEM State Art Reports, volume 16)

Table of contents

  1. Front Matter
    Pages i-xviii
  2. Øyvind Bjøntegaard, Tor Arne Martius-Hammer, Mathias Krauss, Harald Budelmann
    Pages 1-47
  3. Back Matter
    Pages 49-93

About this book

Introduction

This report presents the Round-Robin (RR) program and test results including a statistical evaluation of the RILEM TC195-DTD committee named “Recommendation for test methods for autogenous deformation (AD) and thermal dilation (TD) of early age concrete”. The task of the committee was to investigate the linear test set-up for AD and TD measurements (Dilation Rigs) in the period from setting to the end of the hardening phase some weeks after. These are the stress-inducing deformations in a hardening concrete structure subjected to restraint conditions.
The main task was to carry out an RR program on testing of AD of one concrete at 20 °C isothermal conditions in Dilation Rigs. The concrete part materials were distributed to 10 laboratories (Canada, Denmark, France, Germany, Japan, The Netherlands, Norway, Sweden and USA), and in total 30 tests on AD were carried out. Some supporting tests were also performed, as well as a smaller RR on cement paste. The committee has worked out a test procedure recommendation which is reported separately and submitted acceptance as a RILEM method.

Keywords

Autogenous Deformation Autogenous Shrinkage Early Age Concrete RILEM Method Stress-inducing Deformations Thermal Dilation

Authors and affiliations

  • Øyvind Bjøntegaard
    • 1
  • Tor Arne Martius-Hammer
    • 2
  • Matias Krauss
    • 3
  • Harald Budelmann
    • 4
  1. 1.The Norwegian Public Roads AdministrationTrondheimNorway
  2. 2.SINTEF Building and InfrastructureTrondheimNorway
  3. 3.Safety AssessmentFederal Office of Radiation ProtectionSalzgitterGermany
  4. 4.IBMBBraunschweigGermany

Bibliographic information

  • DOI https://doi.org/10.1007/978-94-017-9266-0
  • Copyright Information RILEM 2015
  • Publisher Name Springer, Dordrecht
  • eBook Packages Engineering
  • Print ISBN 978-94-017-9265-3
  • Online ISBN 978-94-017-9266-0
  • Series Print ISSN 2213-204X
  • Series Online ISSN 2213-2031
  • Buy this book on publisher's site
Industry Sectors
Chemical Manufacturing
Biotechnology
Oil, Gas & Geosciences
Engineering