Advertisement

Specification of a CAD * I Neutral File for CAD Geometry

Wireframes, Surfaces, Solids Version 3.2

  • E. G. Schlechtendahl

Part of the Research Reports ESPRIT book series (ESPRIT, volume 1)

Table of contents

  1. Front Matter
    Pages I-XV
  2. Introduction to the Specification

    1. Front Matter
      Pages 1-1
    2. E. G. Schlechtendahl
      Pages 3-4
    3. E. G. Schlechtendahl
      Pages 5-8
    4. E. G. Schlechtendahl
      Pages 9-18
  3. Reference Manual

    1. Front Matter
      Pages 19-19
    2. E. G. Schlechtendahl
      Pages 21-42
    3. E. G. Schlechtendahl
      Pages 43-150
    4. E. G. Schlechtendahl
      Pages 151-156
    5. E. G. Schlechtendahl
      Pages 157-169
  4. Implementation Guidelines

    1. Front Matter
      Pages 171-171
    2. E. G. Schlechtendahl
      Pages 173-180
    3. E. G. Schlechtendahl
      Pages 181-182
    4. E. G. Schlechtendahl
      Pages 183-186
    5. E. G. Schlechtendahl
      Pages 187-191
    6. E. G. Schlechtendahl
      Pages 193-193
    7. E. G. Schlechtendahl
      Pages 195-200
    8. E. G. Schlechtendahl
      Pages 201-202
    9. E. G. Schlechtendahl
      Pages 203-211
  5. Back Matter
    Pages 213-255

About this book

Introduction

1.1 PURPOSE The purpose of this paper is to document the results of Working Group (wireframes), Working Group 2 (solids) ,and Working Group 3 (surfaces) of the ESPRIT project 322 CAD*I (CAD Interfaces). The goal of these working groups is: 1. Develop a neutral file format for transfer of CAD data (curves, surfaces, and solid models) between CAD systems, and from the CAD domain to CAA (computer aided analysis) and CAM (computer aided manufacturing). 2. Develop pre- and post-processors with a number of representative CAD systems for this neutral file format. 3. Develop representative test model files and perform cycle tests and inter-system tests for CAD model transfer. 4. Contribute to the standardization activities in the national standardi­ zation bodies and in ISO for the establishment of a neutral file format for CAD data. This paper corresponds to a development stage as it was reached on July 6, 1987.

Keywords

CAD CAM computer-aided design (CAD) computer-aided manufacturing (CAM) development interfaces manufacturing model

Editors and affiliations

  • E. G. Schlechtendahl
    • 1
  1. 1.Kernforschungszentrum Karlsruhe GmbHKarlsruhe 1Federal Republic of Germany

Bibliographic information

  • DOI https://doi.org/10.1007/978-3-642-97057-3
  • Copyright Information Springer-Verlag Berlin Heidelberg 1987
  • Publisher Name Springer, Berlin, Heidelberg
  • eBook Packages Springer Book Archive
  • Print ISBN 978-3-540-18397-6
  • Online ISBN 978-3-642-97057-3
  • Buy this book on publisher's site
Industry Sectors
Pharma
Materials & Steel
Automotive
Electronics
Aerospace
Oil, Gas & Geosciences
Engineering