Advertisement

Advances in Manufacturing Engineering and Materials

Proceedings of the International Conference on Manufacturing Engineering and Materials (ICMEM 2018), 18–22 June, 2018, Nový Smokovec, Slovakia

  • Sergej Hloch
  • Dagmar Klichová
  • Grzegorz M. Krolczyk
  • Somnath Chattopadhyaya
  • Lucie Ruppenthalová

Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Table of contents

  1. Front Matter
    Pages i-xiv
  2. Invited Papers

  3. Water Jet Technology Session

    1. Front Matter
      Pages 27-27
    2. Miroslav Duspara, Tomislav Palatinuš, Dejan Marić, Ivan Samardžić, Željko Ivandić, Antun Stoić
      Pages 29-35
    3. Müller Miroslav, Valášek Petr, Novotný Jan, Ruggiero Alessandro, D’Amato Roberto, Habrová Karolína
      Pages 45-53
    4. Akash Nag, Sergej Hloch, Amit Rai Dixit, Dominik Cuha
      Pages 63-71
    5. Ashish Kumar Srivastava, Akash Nag, Amit Rai Dixit, Sandeep Tiwari, Vishal Shankar Srivastava
      Pages 72-84
    6. Madhulika Srivastava, Sergej Hloch, Miroslav Muller, Monika Hromasová, Jaromír Cais, Somnath Chattopadhyaya et al.
      Pages 85-96
    7. Viktor Puchý, Martin Fides, Róbert Džunda, Richard Sedlák, Jaroslav Kováčik, Sergej Hloch et al.
      Pages 97-104
    8. Jiří Klich, Dagmar Klichová, Kamil Souček
      Pages 114-123
    9. Michal Zelenak, Zdenek Riha, Kamil Soucek, Frank Pude
      Pages 144-155
    10. Rupam Tripathi, Sergej Hloch, Somnath Chattopadhyaya, Pavel Adamcik, Alok Kumar Das
      Pages 156-162
    11. Dominika Lehocká, Vladimír Simkulet, Jiří Klich, Zdeněk Štorkan, Lucie Krejčí, Ján Kepič et al.
      Pages 163-172
    12. Fuat Kartal, Sergej Hloch
      Pages 173-179
  4. (Un)conventional Technology Session

    1. Front Matter
      Pages 181-181
    2. Vladimir Modrak, Zuzana Soltysova, Robert Poklemba
      Pages 183-194
    3. Roberto D’Amato, Roque Calvo, Massimiliano Merola, Petr Valášek, Miroslav Müller
      Pages 195-204
    4. Witold Habrat, Krzystof Krupa, Nikolaos E. Karkalos
      Pages 205-212
    5. Anuj Kumar Sharma, Rabesh Kumar Singh, Amit Rai Dixit, Arun Kumar Tiwari, Mahip Singh
      Pages 213-219
    6. Mohammed Shariq, Amit Rai Dixit, Rupert Kargl, Somnath Chattopadhyaya, Meduri Venkata Sridutt, Pasagada Venkata Keerti Vardhan et al.
      Pages 220-228
    7. Izidor Sabotin, Gianluca Tristo, Andrej Lebar, Marko Jerman, Miha Prijatelj, Pavel Drešar et al.
      Pages 229-236
    8. Witold Habrat, Krzysztof Krupa, Piotr Laskowski, Jan Sieniawski
      Pages 237-245
    9. Gagan Kumar Guptaa, Somnath Chattopadhyayab
      Pages 246-253
    10. Kamil Židek, Alexander Hosovsky, Jan Piteľ, Slavomír Bednár
      Pages 281-289
    11. Jakub Mesicek, Jana Petru, Tomas Zlamal, Marek Pagac, Jiri Sedivy, Ondrej Vortel et al.
      Pages 290-298
    12. Nicolae Stelian Ungureanu, Adrian Petrovan, Miorita Ungureanu
      Pages 299-306
    13. Krzysztof Makles, Jerzy Winczek, Marek Gucwa
      Pages 307-314
    14. Radoslaw W. Maruda, Szymon Wojciechowski, Grzegorz M. Krolczyk, Danil Yu Pimenov, Stanislaw Legutko
      Pages 341-350
    15. Jozef Kužma, Michal Krescanko, Sergej Hloch
      Pages 351-361
    16. Manish Oraon, Vinay Sharma
      Pages 362-371
  5. Materials

    1. Front Matter
      Pages 373-373
    2. Simon M. Barrans, Andrew Thompson, John Allport
      Pages 375-385
    3. Frantisek Botko, Jozef Zajac, Andrej Czan, Svetlana Radchenko, Vladimir Simkulet, Pavol Radic et al.
      Pages 386-397
    4. Eugene Feldshtein, Piotr Nieslony
      Pages 398-406
    5. Mustafa Yagimli, Hakan Tozan, H. Ergin Esen, Emin Arca
      Pages 407-412
    6. Marek Gucwa, Milos Mičian, Krzysztof Makles, Jerzy Winczek
      Pages 413-420
    7. Dorota Habrat, Dorota Stadnicka, Witold Habrat
      Pages 421-430

About these proceedings

Introduction

This book reports on cutting-edge research and technologies in the field of advanced manufacturing and materials, with a special emphasis on unconventional machining process, rapid prototyping and biomaterials. Based on the International Conference on Manufacturing Engineering and Materials (ICMEM 2018), held in Nový Smokovec, Slovakia on 18–22 June 2018, it covers advances in various disciplines, which are expected to increase the industry’s competitiveness with regard to sustainable development and preservation of the environment and natural resources. Condition monitoring, industrial automation, and diverse fabrication processes such as welding, casting and molding, as well as tribology and bioengineering, are just a few of the topics discussed in the book’s wealth of authoritative contributions.


Keywords

Wear Simulation Engine Friction Model Measurement Uncertainty Industrial Modeling And Simulation Systems Modeling Rapid Prototyping Evaluation of Material Properties Polyethylene Insert Materials for Knee Prosthesis Water Jet Technology Plasma Cutting Technology Laser Cutting Technology New Materials For Manufacturing

Editors and affiliations

  • Sergej Hloch
    • 1
  • Dagmar Klichová
    • 2
  • Grzegorz M. Krolczyk
    • 3
  • Somnath Chattopadhyaya
    • 4
  • Lucie Ruppenthalová
    • 5
  1. 1.Faculty of Manufacturing TechnologiesTechnical University of Košice with a seat in PrešovPrešovSlovakia
  2. 2.Institute of Geonics of the CASOstrava-PorubaCzech Republic
  3. 3.Faculty of Mechanical EngineeringOpole University of TechnologyOpolePoland
  4. 4.Indian School of Mines (ISM)Indian Institute of TechnologyDhanbadIndia
  5. 5.Institute of Geonics of the CASOstrava-PorubaCzech Republic

Bibliographic information

  • DOI https://doi.org/10.1007/978-3-319-99353-9
  • Copyright Information Springer Nature Switzerland AG 2019
  • Publisher Name Springer, Cham
  • eBook Packages Engineering
  • Print ISBN 978-3-319-99352-2
  • Online ISBN 978-3-319-99353-9
  • Series Print ISSN 2195-4356
  • Series Online ISSN 2195-4364
  • Buy this book on publisher's site
Industry Sectors
Pharma
Materials & Steel
Automotive
Chemical Manufacturing
Biotechnology
Electronics
Consumer Packaged Goods
Energy, Utilities & Environment
Aerospace
Oil, Gas & Geosciences
Engineering