Applied Mechanics, Behavior of Materials, and Engineering Systems

Selected contributions to the 5th Algerian Congress of Mechanics, CAM2015, El-Oued, Algeria, October 25 – 29

  • Taoufik Boukharouba
  • Guy Pluvinage
  • Krimo Azouaoui
Conference proceedings

Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Table of contents

  1. Front Matter
    Pages i-xiii
  2. Bruno Atzori, Govanni Meneghetti, Mauro Ricotta
    Pages 9-23
  3. Kada Mouedden, Adel Belattar, Lakhdar Taleb
    Pages 25-39
  4. Mouaad Brik, Malek Chabane Chaouche, Lakhdar Taleb
    Pages 41-49
  5. Ammar Jabbar Hassan, Ramzi Lechelah, Taoufik Boukharouba, Djamel Miroud, Nacer-eddine Titouche, Nourdine Ouali
    Pages 51-66
  6. Píška Miroslav, Trubačová Pavlĺna, Horníková Jana, Šandera Pavel, Klas Boivie
    Pages 67-86
  7. Guy Pluvinage, Julien Capelle, Mohamed Hadj Meliani
    Pages 87-99
  8. Mohammed Hadj Meliani, Omar Bouledroua, Mohamed Ould-M’beirick, Khaled Elmiloudi, Mohamed Sadou, Guy Pluvinage
    Pages 101-116
  9. Branislav Djordjevic, Simon A Sedmak, Uros Tatic, Milos Milosevic, Filip Vucetic
    Pages 117-127
  10. Gihad Kerrar, Nesar Merah, Abdelrahman Nasr Shuaib, Fadi AL-Badour, Abdelaziz Bazoune
    Pages 129-138
  11. Sadam Houcine Habib, Brahim Elkhalil Hachi, Mohamed Guesmi, Mohamed Haboussi
    Pages 157-167
  12. Yassine Adjal, Rachid Benzidane, Zouaoui Sereir
    Pages 179-191
  13. Yamina Mebdoua, Yazid Fizi, Hadj Lahmar
    Pages 193-203
  14. Ramdane Younes, Nouredine Ouelaa, Nacer Hamzaoui, Abderrazek Djebala
    Pages 219-225
  15. Sami Ayadi, Ezzeddine Haj Taïeb
    Pages 227-238
  16. Mustapha Merzoug, Khalid Ait Shgir, Abdelhamid Miloudi, Jean Paul Dron
    Pages 239-250
  17. Tarek Kebabsa, Nouredine Ouelaa, Jerome Antoni, Mohamed Cherif Djamaa, Raid Khettabi, Abderrazek Djebala
    Pages 251-266
  18. Nouredine Ouelaa, Ramdane Younes, Nacer Hamzaoui, Abderrazek Djebala
    Pages 267-274
  19. Oussama Zerti, Mohamed Athmane Yallese, Salim Belhadi, Lakhdar Bouzid
    Pages 275-288
  20. Mohamed Khemissi Babouri, Nouredine Ouelaa, Abderrazek Djebala, Mohamed Cherif Djamaa, Septi Boucherit
    Pages 299-310
  21. Djelloul Gueribiz, Frédéric Jacquemin, Hocine Bourenane, Silvain Fréour
    Pages 311-321
  22. Hamza Bennaceur, Salah Ramtani, Toufik Outtas
    Pages 323-330
  23. Mokrane Gousmine, Djamel Miroud, Mohamed Farid Benlamnouar, Boualeme Demri, Abderrahmane Younes
    Pages 365-374
  24. Abdelhakim Maizia, Abdelkader Hocine, Hocine Dehmous, David Chapelle
    Pages 387-397
  25. Ali Makhloufi, Djelloul Gueribiz, Djamel Boutassouna, Frédéric Jacquemin, Mustapha Zaoui
    Pages 411-423
  26. Abderrahmane Younes, Nacer Eddine Bacha, Mourad Zergoug, Mokrane Gousmine, Heider Dehdouh, Amirouche Bouamer
    Pages 425-433
  27. Mohamed-Ouejdi Belarbi, Abdelouahab Tati, Houdayfa Ounis, Abdelhak Khechai
    Pages 435-446
  28. Lakhdar Bouzid, Mohamed Athmane Yallese, Salim Belhadi, Lakhdar Boulanouar
    Pages 447-452
  29. Vincent Robin, Michel Champion, Arnaud Mura, Q.N. Kim Kha
    Pages 453-463
  30. Mohamed Bencherif, Rachid Sahnoun, Abdelkrim Liazid
    Pages 475-489
  31. Abdallah Benarous, Souhila Agred, Larbi Loukarfi, Abdelkrim Liazid
    Pages 491-501
  32. Rachid Sahnoun, Abdelkrim Liazid
    Pages 503-509
  33. Karim Ragui, Abdelkader Boutra, Rachid Bennacer, Youb Khaled Benkahla
    Pages 511-522
  34. Hanane Azoui, Abdellah Laidoune, Djamel Haddad, Derradji Bahloul
    Pages 523-533
  35. Martina J. Mazankova
    Pages 551-560
  36. Back Matter
    Pages 569-570

About these proceedings


This book covers a variety of topics in mechanics, with a special emphasis on material mechanics. It reports on fracture mechanics, fatigue of materials, stress-strain behaviours, as well as transferability problems and constraint effects in fracture mechanics. It covers different kind of materials, from metallic materials such as ferritic and austenitic steels, to composites, concrete, polymers and nanomaterials. Additional topics include heat transfer, quality control and reliability of structures and components. Furthermore, the book gives particular attention to new welding technologies such as STIR welding and spray metal coating, and to novel methods for quality control, such as Taguchi design, fault diagnosis and wavelet analysis. Based on the 2015 edition of the Algerian Congress of Mechanics (Congrès Algérien de Mécanique, CAM), the book also covers energetics, in terms of simulation of turbulent reactive flow, behaviour of supersonic jet, turbulent combustion, fire induced smoke layer, and heat and mass transfer, as well as important concepts related to human reliability and safety of components and structures. All in all, the book represents a complete, practice-oriented reference guide for both academic and professionals in the field of mechanics.


Fatigue Tests Stress - Life Approach Linear Elastic Fracture Mechanics Sharp Notches Inclined Notches Fracture Toughness With Constraint Selective Laser Melting (SLM) Technology Mechanical Behavior Friction Stir Welding Fail-Safe Pressure Vessel Design Residual Stress Determination Wavelet Multi-Resolution Analysis Modeling of Composites MR Damper Seismic Response Nonlinear Static Method FRP-Concrete Beams Diffusive Behavior Accident Analysis CAM 2015

Editors and affiliations

  • Taoufik Boukharouba
    • 1
  • Guy Pluvinage
    • 2
  • Krimo Azouaoui
    • 3
  1. 1.Lab for Advanced MechanicsUSTHBBab-EzzouarAlgeria
  2. 2.MetzFrance
  3. 3.Laboratoire de Mécanique Avancée (LMA)(USTHB)Bab-EzzouarAlgeria

Bibliographic information

  • DOI
  • Copyright Information Springer International Publishing Switzerland 2017
  • Publisher Name Springer, Cham
  • eBook Packages Engineering Engineering (R0)
  • Print ISBN 978-3-319-41467-6
  • Online ISBN 978-3-319-41468-3
  • Series Print ISSN 2195-4356
  • Series Online ISSN 2195-4364
  • Buy this book on publisher's site
Industry Sectors
Materials & Steel
Chemical Manufacturing
Energy, Utilities & Environment
Oil, Gas & Geosciences