Rheology and Processing of Construction Materials

RheoCon2 & SCC9

  • Viktor Mechtcherine
  • Kamal Khayat
  • Egor Secrieru
Conference proceedings RheoCon 2019, SCC 2019

Part of the RILEM Bookseries book series (RILEM, volume 23)

Table of contents

  1. Front Matter
    Pages i-xxxi
  2. Materials Science and Design

  3. Effect of Supplementary Cementitious Materials, Fillers and Chemical Admixtures on Rheology

    1. Front Matter
      Pages 69-69
    2. Aparna Sai Surya Sree Nedunuri, Salman Muhammad
      Pages 71-78
    3. Mahzad Azima, Zeynep Başaran Bundur
      Pages 79-86
    4. Jacek Gołaszewski, Tomasz Ponikiewski, Aleksandra Kostrzanowska-Siedlarz
      Pages 87-96
    5. Tamino Hirsch, Tobias Dorn, Dietmar Stephan
      Pages 97-105
    6. Sarah Leinitz, Zichen Lu, Simon Becker, Dietmar Stephan, Regine von Klitzing, Wolfram Schmidt
      Pages 106-115
    7. Maximilian Schleiting, Alexander Wetzel, Florian Gerland, Thomas Niendorf, Olaf Wünsch, Bernhard Middendorf
      Pages 142-148
  4. Laboratory and In-Situ Rheological Testing

    1. Front Matter
      Pages 149-149
    2. Livia B. Agostinho, Eugenia F. da Silva, Luciana A. Farias, Alexandre C. Pereira
      Pages 151-159
    3. Gonzalo Barluenga, Irene Palomar, Cynthia Guardia, Hugo Varela, Francisco Hernandez-Olivares
      Pages 160-167
    4. Xavier Berger, Pierre Siccardi, Robin Jean, Marc Jolin, Denis Beaupre, Benoît Bissonnette
      Pages 174-181
    5. Fábio A. Cardoso, Franco A. Grandes, Victor K. Sakano, Andressa C. A. Rego, Fábio C. Lofrano, Vanderley M. John et al.
      Pages 182-190
    6. Victor K. Sakano, Franco A. Grandes, Fábio A. Cardoso, Fábio L. Campora, Roberto C. O. Romano, Rafael G. Pileggi
      Pages 191-199
    7. Alessandra L. Fujii-Yamagata, Fábio A. Cardoso, Anne Daubresse, Evelyne Prat, Mohend Chaouche
      Pages 200-208
    8. Cordula Jakob, Daniel Jansen, Ursula Pott, Jürgen Neubauer
      Pages 219-227
    9. Ursula Pott, Clemens Ehm, Cordula Jakob, Dietmar Stephan
      Pages 246-255
    10. Nonkululeko W. Radebe, Karl-Friedrich Ratzsch, Christopher O. Klein, Manfred Wilhelm
      Pages 256-265
    11. Shamir Sakir, Sudharshan N. Raman, A. B. M. Amrul Kaish, Azrul A. Mutalib
      Pages 266-272
    12. Mareike Thiedeitz, Thomas Kränkel, Christoph Gehlen
      Pages 273-280
  5. Mixing, Processing and Casting of Mortar and Concrete

    1. Front Matter
      Pages 281-281
    2. Bart Craeye, Wim Bastiaens, Erik Coppens, Dirk Van Houdt, Wilfried Gijbels, Thomas Rondou
      Pages 283-293
    3. Inka Dreßler, Patrick Varady, Hans-Werner Krauss, Dirk Lowke
      Pages 294-302
    4. Shirin Fataei, Egor Secrieru, Viktor Mechtcherine
      Pages 303-310
    5. Danila Fabiane Ferraz, Ariane C. R. Martho, Elizabeth G. Burns, Roberto C. O. Romano, Rafael G. Pileggi
      Pages 311-319
    6. Pierre Siccardi, Xavier Berger, Robin Jean, Marc Jolin, Benoît Bissonnette, Denis Beaupré
      Pages 338-345
  6. Additive Manufacturing and 3D-Printing

    1. Front Matter
      Pages 353-353
    2. Ravendran Arunothayan, Behzad Nematollahi, Shin Hau Bong, Ravi Ranade, Jay Sanjayan
      Pages 355-362
    3. Shin Hau Bong, Behzad Nematollahi, Ming Xia, Ali Nazari, Jay Sanjayan, Jinlong Pan
      Pages 363-372
    4. Seung Cho, Jacques Kruger, Algurnon van Rooyen, Stephan Zeranka, Gideon van Zijl
      Pages 373-381

About these proceedings


This book gathers the peer-reviewed contributions presented at two parallel, closely interconnected events on advanced construction materials and processes, namely the 2nd International RILEM Conference on Rheology and Processing of Construction Materials (RheoCon2) and the 9th International RILEM Symposium on Self-Compacting Concrete (SCC9), held in Dresden, Germany on 8-11 September 2019. The papers discuss various aspects of research on the development, testing, and applications of cement-based and other building materials together with their specific rheological properties. Furthermore, the papers cover the latest findings in the fast-growing field of self-compacting concrete, addressing topics including components’ properties and characterization; chemical admixtures, effect of binders (incl. geopolymers, calcined clay, etc.) and mixture design; laboratory and in-situ rheological testing; constitutive models and flow modelling; numerical simulations; mixing, processing and casting processes; and additive manufacturing / 3D-printing. Also presenting case studies, the book is of interest to researchers, graduate students, and industry specialists, such as material suppliers, consultants and construction experts.


Fresh Properties 3D-printing Rheometry Numerical Simulations Flow Modelling Effect of Binders RILEM

Editors and affiliations

  • Viktor Mechtcherine
    • 1
  • Kamal Khayat
    • 2
  • Egor Secrieru
    • 3
  1. 1.Faculty of Civil EngineeringTechnische Universität DresdenDresdenGermany
  2. 2.Missouri University of Science and TechnologyRollaUSA
  3. 3.Faculty of Civil EngineeringTU DresdenDresdenGermany

Bibliographic information

  • DOI
  • Copyright Information RILEM 2020
  • Publisher Name Springer, Cham
  • eBook Packages Engineering
  • Print ISBN 978-3-030-22565-0
  • Online ISBN 978-3-030-22566-7
  • Series Print ISSN 2211-0844
  • Series Online ISSN 2211-0852
  • Buy this book on publisher's site
Industry Sectors
Chemical Manufacturing
Oil, Gas & Geosciences