Advertisement

Advances in Additive Manufacturing, Modeling Systems and 3D Prototyping

Proceedings of the AHFE 2019 International Conference on Additive Manufacturing, Modeling Systems and 3D Prototyping, July 24-28, 2019, Washington D.C., USA

  • Massimo Di Nicolantonio
  • Emilio Rossi
  • Thomas Alexander
Conference proceedings AHFE 2019

Part of the Advances in Intelligent Systems and Computing book series (AISC, volume 975)

Table of contents

  1. Front Matter
    Pages i-xvii
  2. Design and Innovation for 3D Printing

    1. Front Matter
      Pages 1-1
    2. Emilio Rossi, Massimo Di Nicolantonio, Paola Barcarolo, Jessica Lagatta
      Pages 3-15
    3. Antonio Marano
      Pages 16-23
    4. Elisabetta Cianfanelli, Eleonora Trivellin, Marco Marseglia, Margherita Tufarelli, Gabriele Goretti
      Pages 24-34
    5. Wilson Ricardo Leal da Silva, Hervé Fryda, Jean-Noël Bousseau, Pierre-Antoine Andreani, Thomas J. Andersen
      Pages 35-47
    6. Gabriele Goretti, Elisabetta Cianfanelli, Benedetta Terenzi, Margherita Tufarelli, Eleonora Trivellin
      Pages 48-59
    7. Raffaella Fagnoni, Xavier Ferrari Tumay, Annapaola Vacanti, Andrea Vian
      Pages 60-70
  3. 3D Printing Technology

    1. Front Matter
      Pages 81-81
    2. Andrei Popa, Brian Zellers, Simon Iversen, Dillon Kennedy, Pedro Cortes, Lars Duggen et al.
      Pages 83-92
    3. Keun Park, Young-Eun Lim, Jung-Hwan Park
      Pages 100-107
  4. Research on 3D Printing, Design and Digital Modeling

    1. Front Matter
      Pages 129-129
    2. Fabrizio Ivan Apollonio, Federico Fallavollita, Riccardo Foschi
      Pages 131-142
    3. Massimo Di Nicolantonio, Emilio Rossi, Paride Stella
      Pages 143-152
    4. Martijn ten Bhömer, Derrick Tate, Shixuan Wang, Filippo Campanile, Yaoyu Chen
      Pages 153-165
  5. Algorithmic Design and Rapid Prototyping for Cultural Heritage

  6. Recent Developments in Rapid Prototyping for Assistive Technologies

    1. Front Matter
      Pages 277-277
    2. Vanessa Ghiraldeli Usó, Frode Eika Sandnes, Fausto Orsi Medola
      Pages 279-288
    3. Amanda Figliolia, Fausto Medola, Frode Sandnes, Ana Claudia Tavares Rodrigues, Luis Carlos Paschoarelli
      Pages 289-297
    4. Ana Lya Moya Ferrari, Aline Darc Piculo dos Santos, Guilherme da Silva Bertolaccini, Fausto Orsi Medola, Frode Eika Sandnes
      Pages 298-307
    5. Rodolfo Nucci Porsani, Bruno Borges da Silva, Luiz Antonio Vasques Hellmeister, Fausto Orsi Medola, Luis Carlos Paschoarelli
      Pages 308-317
    6. Bruno Borges da Silva, Rodolfo Nucci Porsani, Luiz Antonio Vasquez Hellmeister, Fausto Orsi Medola, Luis Carlos Paschoarelli
      Pages 318-327
    7. Idinei Francisco Pires de Carvalho Filho, Fausto Orsi Medola, Frode Eika Sandnes, Luis Carlos Paschoarelli
      Pages 328-336
  7. Smart Additive Manufacturing: Sensing, Data Analytics and Process Control

  8. New Materials and Industrial Processes for Additive Manufacturing

    1. Front Matter
      Pages 363-363
    2. Daniel Saloni, Nicole Mervine
      Pages 365-376
  9. Additive Manufacturing and Industrial Production

    1. Front Matter
      Pages 399-399
    2. Massimo Musio-Sale, Paolo Licinio Nazzaro, Eric Peterson
      Pages 401-410
    3. Álvaro M. Sampaio, Rita Gonçalves, André Lima, Paulo J. S. Cruz, Bruno Figueiredo, Sandra Carvalho et al.
      Pages 418-427
    4. Julian I. Aguilar-Duque, Juan L. Hernández-Arellano, Cesar Balderrama-Armendariz, Liliana Avelar
      Pages 428-438

Other volumes

  1. Proceedings of the AHFE 2019 International Conference on Affective and Pleasurable Design, July 24-28, 2019, Washington D.C., USA
  2. Proceedings of the AHFE 2019 International Conference on Neuroergonomics and Cognitive Engineering, and the AHFE International Conference on Industrial Cognitive Ergonomics and Engineering Psychology, July 24-28, 2019, Washington D.C., USA
  3. Proceedings of the AHFE 2019 International Conference on Design for Inclusion and the AHFE 2019 International Conference on Human Factors for Apparel and Textile Engineering, July 24-28, 2019, Washington D.C., USA
  4. Proceedings of the AHFE 2019 International Conference on Ergonomics in Design, July 24-28, 2019, Washington D.C., USA
  5. Proceedings of the AHFE 2019 International Conference on Human Error, Reliability, Resilience, and Performance, July 24-28, 2019, Washington D.C., USA
  6. Proceedings of the AHFE 2019 International Conference on Human Factors and Ergonomics in Healthcare and Medical Devices, July 24-28, 2019, Washington D.C., USA
  7. Proceedings of the AHFE 2019 International Conference on Human Factors and Simulation, July 24-28, 2019, Washington D.C., USA
  8. Proceedings of the AHFE 2019 International Conference on Human Factors and Systems Interaction, July 24-28, 2019, Washington D.C., USA
  9. Proceedings of the AHFE 2019 International Conference on Human Factors in Cybersecurity, July 24-28, 2019, Washington D.C., USA
  10. Proceedings of the AHFE 2019 International Conference on Human Factors, Business Management and Society, and the AHFE International Conference on Human Factors in Management and Leadership, July 24-28, 2019, Washington D.C., USA
  11. Proceedings of the AHFE 2019 International Conference on Human Factors in Robots and Unmanned Systems, July 24-28, 2019, Washington D.C., USA
  12. Proceedings of the AHFE 2019 International Conference on Human Factors in Training, Education, and Learning Sciences, July 24-28, 2019, Washington D.C., USA
  13. Proceedings of the AHFE 2019 International Conference on Human Factors in Artificial Intelligence and Social Computing, the AHFE International Conference on Human Factors, Software, Service and Systems Engineering, and the AHFE International Conference of Human Factors in Energy, July 24-28, 2019, Washington D.C., USA
  14. Proceedings of the AHFE 2019 International Conference on Human Factors in Architecture, Sustainable Urban Planning and Infrastructure, July 24-28, 2019, Washington D.C., USA
  15. Proceedings of the AHFE 2019 International Conference on Physical Ergonomics and Human Factors, July 24-28, 2019, Washington D.C., USA
  16. Proceedings of the AHFE 2019 International Conference on Interdisciplinary Practice in Industrial Design, July 24-28, 2019, Washington D.C., USA
  17. Proceedings of the AHFE 2019 International Conference on Safety Management and Human Factors, July 24-28, 2019, Washington D.C., USA
  18. Proceedings of the AHFE 2019 International Conference on Social and Occupational Ergonomics, July 24-28, 2019, Washington D.C., USA
  19. Proceedings of the AHFE 2019 International Conference on Human Aspects of Advanced Manufacturing, and the AHFE International Conference on Advanced Production Management and Process Control, July 24-28, 2019, Washington D.C., USA
  20. Proceedings of the AHFE 2019 International Conferences on Usability & User Experience, and Human Factors and Assistive Technology, July 24-28, 2019, Washington D.C., USA
  21. Proceedings of the AHFE 2019 International Conference on Human Factors and Wearable Technologies, and the AHFE International Conference on Game Design and Virtual Environments, July 24-28, 2019, Washington D.C., USA
  22. Advances in Additive Manufacturing, Modeling Systems and 3D Prototyping
    Proceedings of the AHFE 2019 International Conference on Additive Manufacturing, Modeling Systems and 3D Prototyping, July 24-28, 2019, Washington D.C., USA

About these proceedings

Introduction

This book discusses the latest advances in digital modeling systems (DMSs) and additive manufacturing (AM) technologies. It covers applications of networked technologies, ubiquitous computing, new materials and hybrid production systems, discussing how they are changing the processes of conception, modeling and production of products and systems of product. The book emphasizes ergonomic and sustainability issues, as well as timely topics such as DMSs and AM in Industry 4.0, DMSs and AM in developing countries, DMSs and AM in extreme environments, thus highlighting future trends and promising scenarios for further developing those technologies. Based on the AHFE 2019 International Conference on Additive Manufacturing, Modeling Systems and 3D Prototyping, held on July 24-28, 2019, in Washington D.C., USA, the book is intended as source of inspiration for researchers, engineers and stakeholders, and to foster interdisciplinary and international collaborations between them

Keywords

Intelligent Manufacturing Systems Virtual Reality in Manufacturing Robotic Additive Manufacturing Hybrid Production Systems 3D Modeling Software Advanced Products and Services Novel Manufacturing Technologies Product Development with 3D Printing 3D Printing for Product Design 3D Printable Materials AHFE 2019 Proceedings

Editors and affiliations

  • Massimo Di Nicolantonio
    • 1
  • Emilio Rossi
    • 2
  • Thomas Alexander
    • 3
  1. 1.Architecture DepartmentUniversity of Chieti-PescaraPescaraItaly
  2. 2.Emilio Rossi Design ConsultingOrtonaItaly
  3. 3.BonnGermany

Bibliographic information

  • DOI https://doi.org/10.1007/978-3-030-20216-3
  • Copyright Information Springer Nature Switzerland AG 2020
  • Publisher Name Springer, Cham
  • eBook Packages Engineering
  • Print ISBN 978-3-030-20215-6
  • Online ISBN 978-3-030-20216-3
  • Series Print ISSN 2194-5357
  • Series Online ISSN 2194-5365
  • Buy this book on publisher's site
Industry Sectors
Pharma
Materials & Steel
Automotive
Chemical Manufacturing
Biotechnology
Electronics
Consumer Packaged Goods
Energy, Utilities & Environment
Aerospace
Oil, Gas & Geosciences
Engineering