Advertisement

Advances in Condition Monitoring of Machinery in Non-Stationary Operations

Proceedings of the 6th International Conference on Condition Monitoring of Machinery in Non-Stationary Operations, CMMNO’2018, 20-22 June 2018, Santander, Spain

  • Alfonso Fernandez Del Rincon
  • Fernando Viadero Rueda
  • Fakher Chaari
  • Radoslaw Zimroz
  • Mohamed Haddar
Conference proceedings CMMNO 2018

Part of the Applied Condition Monitoring book series (ACM, volume 15)

Table of contents

  1. Front Matter
    Pages i-xi
  2. Condition Monitoring in Non-Stationary Operations

    1. Front Matter
      Pages 1-1
    2. Emna Sghaier, Adeline Bourdon, Didier Remond, Jean-Luc Dion, Nicolas Peyret
      Pages 11-19
    3. Paul Honeine, Samira Mouzoun, Mario Eltabach
      Pages 20-29
    4. Ayoub Mbarek, Ahmed Hammami, Alfonso Fernández del Rincón, Fakher Chaari, Miguel Iglesias, Fernando Viadero Rueda et al.
      Pages 30-38
    5. Hugo Andre, Flavien Allemand, Ilyes Khelf, Adeline Bourdon, Didier Remond
      Pages 44-53
    6. Paweł Stefaniak, Paweł Śliwiński, Paula Poczynek, Agnieszka Wyłomańska, Radosław Zimroz
      Pages 54-63
  3. Monitoring and Diagnostic Systems

    1. Front Matter
      Pages 65-65
    2. Dongdong Wei, KeSheng Wang, Stephan Heyns, Ming J. Zuo
      Pages 67-76
    3. Mikel Gonzalez, Oscar Salgado, Jan Croes, Bert Pluymers, Wim Desmet
      Pages 77-89
    4. Guillaume Bruand, Florent Chatelain, Pierre Granjon, Nadine Martin, Christophe Duret, Hervé Lénon
      Pages 90-100
    5. Kilian Hendrickx, Wannes Meert, Bram Cornelis, Karl Janssens, Konstantinos Gryllias, Jesse Davis
      Pages 101-110
    6. Junyu Qi, Alexadre Mauricio, Mathieu Sarrazin, Karl Janssens, Konstantinos Gryllias
      Pages 111-121
    7. Maamar Ali Saud ALTobi, Geraint Bevan, Peter Wallace, David Harrison, K. P. Ramachandran
      Pages 122-131
    8. Ali Moshrefzadeh, Alessandro Fasana, Luigi Garibaldi
      Pages 132-141
    9. Wiesław Migdał, Jacek Wodecki, Maciej Wuczyński, Paweł Stefaniak, Agnieszka Wyłomańska, Radosław Zimroz
      Pages 151-159
    10. Suzana Lampreia, José Requeijo, Vitor Lobo
      Pages 160-168
    11. A. Bustos, H. Rubio, C. Castejón, J. C. García-Prada
      Pages 169-178
    12. Safa Boudhraa, Alfonso Fernández del Rincón, Fakher Chaari, Mohamed Haddar, Fernando Viadero Rueda
      Pages 189-197
  4. Noise and Vibration in Machines

    1. Front Matter
      Pages 199-199
    2. Emilio Di Lorenzo, Fabio Bianciardi, Simone Manzato, Simone Delvecchio, Claudio Manna, Karl Janssens et al.
      Pages 201-210
    3. Marco Cocconcelli, Jacopo Cavalaglio Camargo Molano, Riccardo Rubini, Luca Capelli, Davide Borghi
      Pages 211-220
    4. Lara del Val, Alberto Izquierdo, Juan J. Villacorta, Marta Herráez, Luis Suárez
      Pages 221-228
    5. Fares Mezghani, Alfonso Fernández del Rincón, Mohamed Amine Ben Souf, Pablo García Fernández, Fakher Chaari, Fernando Viadero Rueda et al.
      Pages 229-239
    6. Imthiyas Manarikkal, Faris Elasha, Dina Shona Laila, David Mba
      Pages 240-249
    7. Tomasz Mirosław, Arkadiusz Kwaśniewski, Paweł Ciężkowski, Jan Maciejewski
      Pages 250-259
    8. Ksentini Olfa, Combes Bertrand, Abbes Mohamed Slim, Daidie Alain, Haddar Mohamed
      Pages 260-268
    9. Raquel Martinez, Alberto Pigazo, Mario Manana, Alberto Arroyo, Rafael Minguez
      Pages 269-277
  5. Signal Processing

    1. Front Matter
      Pages 279-279
    2. Stephan Schmidt, Stephan Heyns, Konstantinos Gryllias
      Pages 300-309
    3. Moussa Hamadache, Gianluca D’Elia, Giorgio Dalpiaz
      Pages 310-319
    4. Mirosław Witoś, Mariusz Zieja, Mariusz Żokowski, Jarosław Kozdra, Daniel Pawłowski
      Pages 320-329
    5. Anna Michalak, Agnieszka Wyłomańska, Jacek Wodecki, Radosław Zimroz
      Pages 330-339
  6. Vibro-acoustic Diagnosis of Machinery

    1. Front Matter
      Pages 341-341
    2. Alexadre Mauricio, Wade Smith, Junyu Qi, Robert Randall, Konstantinos Gryllias
      Pages 343-352
    3. Mariusz Żokowski, Mirosław Witoś, Jarosław Spychała, Paweł Majewski
      Pages 353-362
    4. Gianluca D’Elia, Irene Daini, Luigi Romagnoli, Emiliano Mucchi
      Pages 363-372
    5. Piotr Kruczek, Norbert Gomolla, Agnieszka Wyłomańska, Radosław Zimroz
      Pages 373-381
    6. Jacek Wodecki, Anna Michalak, Agnieszka Wyłomańska, Radosław Zimroz
      Pages 382-389
    7. Arkadiusz Kwaśniewski, Tomasz Mirosław, Sebastian Bąk, Paweł Ciężkowski, Jan Maciejewski
      Pages 409-419
  7. Back Matter
    Pages 421-423

About these proceedings

Introduction

This book is aimed at researchers, industry professionals and students interested in the broad ranges of disciplines related to condition monitoring of machinery working in non-stationary conditions. Each chapter, accepted after a rigorous peer-review process, reports on a selected, original piece of work presented and discussed at the International Conference on Condition Monitoring of Machinery in Non-stationary Operations, CMMNO’2018, held on June 20 – 22, 2018, in Santander, Spain. The book describes both theoretical developments and a number of industrial case studies, which cover different topics, such as: noise and vibrations in machinery, conditioning monitoring in non-stationary operations, vibro-acoustic diagnosis of machinery, signal processing, application of pattern recognition and data mining, monitoring and diagnostic systems, faults detection, dynamics of structures and machinery, and mechatronic machinery diagnostics.

Keywords

Fault Detection in Rotating Machineries Vibration Monitoring Variable Speed Wind Turbines Diagnostics of Variable Speed Machines Rotational Synchronous Component Weak Fault Signature Extraction Envelope Analysis Condition Monitoring of Transportation Systems Rotor Dynamics Torsional Vibration Analysis Torsional Models Machine Learning In Fault Diagnostics Temperature Monitoring of Electric Motors Fleet Analysis Bearing Fault Model Variable Speed Profile Variable Load Failure Non-Linear Dynamic Behavior of Planetary Gears Instantaneous Angular Speed CMMNO2018 Proceedings

Editors and affiliations

  • Alfonso Fernandez Del Rincon
    • 1
  • Fernando Viadero Rueda
    • 2
  • Fakher Chaari
    • 3
  • Radoslaw Zimroz
    • 4
  • Mohamed Haddar
    • 5
  1. 1.Department of Structural and Mechanical Engineering, Faculty of Industrial and Telecommunications EngineeringUniversity of CantabriaSantanderSpain
  2. 2.Department of Structural and Mechanical Engineering, Faculty of Industrial and Telecommunications EngineeringUniversity of CantabriaSantanderSpain
  3. 3.Department of Mechanical EngineeringNational School of Engineers of SfaxSfaxTunisia
  4. 4.Institute of Mining EngineeringWroclaw University of TechnologyWrocławPoland
  5. 5.National School of Engineers of SfaxSfaxTunisia

Bibliographic information

  • DOI https://doi.org/10.1007/978-3-030-11220-2
  • Copyright Information Springer Nature Switzerland AG 2019
  • Publisher Name Springer, Cham
  • eBook Packages Engineering
  • Print ISBN 978-3-030-11219-6
  • Online ISBN 978-3-030-11220-2
  • Series Print ISSN 2363-698X
  • Series Online ISSN 2363-6998
  • Buy this book on publisher's site
Industry Sectors
Pharma
Materials & Steel
Automotive
Chemical Manufacturing
Biotechnology
Electronics
Consumer Packaged Goods
Energy, Utilities & Environment
Aerospace
Oil, Gas & Geosciences
Engineering