Raspberry Pi for Arduino Users

Building IoT and Network Applications and Devices

  • James R. Strickland

Table of contents

  1. Front Matter
    Pages i-xxvii
  2. James R. Strickland
    Pages 1-33
  3. James R. Strickland
    Pages 35-61
  4. James R. Strickland
    Pages 63-122
  5. James R. Strickland
    Pages 123-177
  6. James R. Strickland
    Pages 179-211
  7. James R. Strickland
    Pages 213-234
  8. James R. Strickland
    Pages 235-258
  9. James R. Strickland
    Pages 259-287
  10. James R. Strickland
    Pages 289-339
  11. James R. Strickland
    Pages 341-371
  12. James R. Strickland
    Pages 373-394
  13. James R. Strickland
    Pages 395-413
  14. James R. Strickland
    Pages 415-418
  15. Back Matter
    Pages 419-427

About this book


Leverage your Arduino skills in the Raspberry Pi world and see how to cross the two platforms into sophisticated programs.

The Arduino and Raspberry Pi communities overlap more than you might think. Arduinos can be expanded to have network capabilities with a variety of “shields,” all of which increase the cost and complexity of the system. By contrast, Raspberry Pis all run Linux, which is a very network-competent platform. The newest Pi, the Raspberry Pi Zero W,  is WiFi and Bluetooth capable. It makes far more sense to cross to the Raspberry PI platform; this book shows you how to do so.

You'll learn some survival level Linux system administration, so you know how to set the machine up and how to establish at least minimal security for your gadget.  You''ll set up and learn the Geany IDE on your Pi, which is fairly similar to the Arduino IDE. 

You'll see that several projects use and explain the WiringPi system. This is deliberately similar to the Arduino's 'Wiring' functionality, which is how sketches interact with GPIO pins. You'll learn the differences between the GPIO pins of the two devices, and how the Pi has some limitations on those pins that the Arduino does not. As a final project, in an effort to escape some of those limitations, you'll attach an AtMEGA 328P to the Raspberry Pi and configure it as a real, 8MHz Arduino with the Arduino IDE running on the Pi, and learn how to have the two platforms communicate, giving you the best of both worlds.


Raspberry Pi Arduino robot robotics sensor network maker gpio C/C++ C C++

Authors and affiliations

  • James R. Strickland
    • 1
  1. 1.Highlands RanchUSA

Bibliographic information

Industry Sectors
IT & Software